更多"[判断题]扩容xGW GGSN GSU，肯定与计费服务器没有关系，CG"的相关试题:
[判断题]扩容xGW GGSN GSU，肯定与计费服务器没有关系，CG无需做修改。
GSU expansion on the xGW GGSN is not related to the CG server, so no modification needs to be made on the CG.
A.正确
B.错误
[单选题]xGW GGSN扩容GSU时，应该把新增GSU放在（）槽位。
During GSU expansion on the xGW GGSN, we should place the new GSU in slot ( ).
A.14-15
B.16-19
C.6-13
D.0-3
[单选题]xGW GGSN扩容GSU时，必须首先进行的步骤是（）。
During GSU expansion on the xGW GGSN, we need to perform the following step first: ( ).
A.拔出备用MPU
Remove the standby MPU
B.插上新增GSU
Install the new GSU
C.修改GGSN配置数据
Modify GGSN configuration
D.修改CG配置数据 Modify CG configuration
[单选题]xGW GGSN扩容GSU单板时，需要申请的资源不包括（）。
During GSU expansion on the xGW GGSN, we do not need to apply for the following resource: ( ).
A.GTP-C/U IP address
B.CG-agent IP address
C.IP Pool
D.SLB IP address
[多选题]xGW GGSN扩容GSU单板时，需要做改动的是（）。
While expanding the GSU board on the xGW GGSN, we need to modify the following configurations: ( ).
A.GSU group 配置
GSU group configuration
B.Diameter链路配置
Diameter link configuration
C.IP 地址池配置
IP pool configuration
D.Loopback接口地址配置
Loopback interface address configuration
[多选题]xGW GGSN扩容GSU单板时，需要申请的资源包括（）。
While expanding the GSU board on the xGW GGSN, we need to apply for the following resources: ( ).
A.GTP-C/U地址
GTP-C/U address
B.CG-agent地址
CG-agent address
C.IP 地址池
IP pool
D.SLB地址
SLB address
[多选题]xGW GGSN扩容GSU单板时，可能需要哪些节点配合修改数据？
While expanding the GSU board on the xGW GGSN, we probably need to modify data on the following nodes: ( ).
A.CG server
B.SGSN
C.Gi firewall
D.HLR
[判断题]xGW GGSN扩容之前，建议拔出备用MPU，目的是扩容失败时可以迅速倒回。
A.正确
B.错误
[判断题]xGW GGSN扩容之前，建议拔出备用MPU，目的是扩容失败时可以迅速倒回。
Before expansion of the xGW GGSN, it is recommended to remove the standby MPU, so that we can roll back quickly if the expansion fails.
A.正确
B.错误
[单选题]xGW GGSN扩容前的准备工作不包括（）。
Before xGW GGSN expansion, which of the following items is not included in preparation work?
A.检查新增单板固件版本
Check the firmware version of the new board.
B.配置数据备份
Back up configuration data.
C.基本业务测试
Perform basic service test.
D.检查CG磁阵剩余空间大小
Check the size of remaining space size on the CG disk array.
[判断题]xGW GGSN GSU单板的某个CPU发生硬件故障，需要更换备件，应先将该GSU板上所有CPU倒换为备用状态。
When a hardware fault occurs to the GSU board of the xGW GGSN and we need to replace the GSU board, we should first switch all CPUs on this GSU board to the standby state.
A.正确
B.错误
[多选题]xGW GGSN扩容完毕之后，必须进行（）。
When expansion of the xGW GGSN is finished, we need to perform the following operations: ( ).
A.业务测试
Service test
B.话单验证
CDR verification
C.性能统计观察
Observation of performance statistics
D.告警观察
Alarm observation
[判断题]xGW PDSN GSU单板的一个CPU可以支持10万用户数。
A.正确
B.错误
[判断题]xGW GGSN GSU单板正常运行时，RUN灯常亮，ALM灯熄灭。
A.正确
B.错误
[多选题]xGW GGSN扩容前，必须备份MPU上的数据，包括文件夹（）。
Before expanding the xGW GGSN, we must back up data on the MPU, including the following folders: ( ).
A.DATA0
B.DATA1
C.config
D.vmm
[单选题]xGW的GSU单板的控制面地址计算公式是（ ）。
What is the formula to calculate the control plane address of the xGW GSU board? ( )
A.168.0.128+槽位号.16×CPU号
168.0.128+slot number.16×CPU ID
B.168.0.129+槽位号.16×CPU号
168.0.129+slot number.16×CPU ID
C.168.0.130+槽位号.16×CPU号
168.0.130+slot number.16×CPU ID
D.168.0.131+槽位号.16×CPU号
168.0.131+slot number.16×CPU ID
