更多"[单选题]ZXUN-xGW GGSN PFU接口可配置的MAC地址偏移"的相关试题:
[单选题]ZXUN-xGW GGSN PFU接口可配置的MAC地址偏移范围是( )。
Which is the range of MAC offset configured for the PFU interface on the xGW GGSN? ( )
A.0-63
B.1-63
C.0-64
D.1-64
[判断题]xGW GGSN的PFU接口需要手工配置不同的MAC地址偏移,以避免MAC地址冲突。
A.正确
B.错误
[判断题]xGW GGSN的PFU接口需要手工配置不同的MAC地址偏移,以避免MAC地址冲突。
On the PFU interface of the xGW GGSN, we should manually configure different MAC offset values to avoid MAC address conflict.
A.正确
B.错误
[单选题]当配置MAC地址偏移时(在T8000平台的xGW中),这个偏移是相对于()的mac地址而言的。
A.接口板第一个网口
B.STDY 口
C.MGMT 口
D.AUX口
[判断题]PFU接口板的每个接口都需要配置MAC偏移值,而且是相对于MPU设置的MAC值进行的偏移。
A.正确
B.错误
[判断题]xGW GGSN更换PFU单板时,原槽位只能插入相同型号的PFU单板,子卡也必须完全相同,否则可能造成配置数据丢失。
During replacement of the PFU board on the xGW GGSN, the original slot can only be installed with a PFU board of the same model with the same sub-card. Otherwise, the configuration data will be lost.
A.正确
B.错误
[多选题]xGW GGSN中,PFU接口类型有()三种类型。
In xGW GGSN, there are 3 types of PFU interface, including ( ).
A.10GE
B.10GE+GE
C.GE
D.E1
[单选题]xGW接口配置中的mac偏移值是相对于哪个的MAC值偏移?( )
In xGW interface configuration, the MAC offset value is based on the interface of the ( ) board.
A.GSU单板的接口
GSU
B.SFU单板的接口
SFU
C.CSU单板的接口
CSU
D.MPU单板的接口
MPU
[多选题]xGW GGSN的8号槽位插入了一块PFU单板,PFU上安装了2块RP-01XGEL-XFP接口卡(半高),每个接口卡上有1个万兆光模块,这两个万兆接口的名称为( )。
There are 2 RP-01XGEL-XFP cards (half-height) in the PFU installed in slot 8 of the xGW GGSN. For each subcard, there's a 10GE optical module. These 10GE interfaces are named ( ).
A.xgei-0/8/0/1
B.xgei-0/8/0/2
C.xgei-0/8/1/1
D.xgei-0/8/1/2
E.
F.34
G.13
H.01 11
[单选题]GGSN系统全局支持的最大MAC偏移数()。
The maximum MAC offset number that is globally supported in the GGSN system is ().
A.31
B.54
C.63
D.127
[判断题]ARP协议的功能是将ip地址地址转换成MAC地址地址。
A.正确
B.错误
[判断题]数据库投运前,应按需配置访问数据库的MAC地址。
A.正确
B.错误
[简答题]GOOSE和SV报文MAC地址范围建议如何分配?优先级默认值分别为多少?以太网类型及APPID分别是什么?