更多"A-frames and cylinder block is held"的相关试题:
[单项选择]There is a support ring between the cylinder block and collar of the cylinder liner, thus carrying both the liner and the cylinder coverIt also passes to the cooling bores and to the cover（）
A. cooling water
B. cooling oil
C. refrigerant
D. lubricate oil
[单项选择]An efficient seal between the cylinder block and cylinder heads on many diesel engines is obtained with（）
A. graphite packing
B. sealing compound
C. lubricating oil
D. gaskets
[单项选择]The cylinder liner forming the cylinder wall and the inside of the water jacket is called a（）
A. dry liner
B. wet liner
C. jacket liner
D. corrugated liner
[单项选择]Cracks in cylinder and cylinder covers may （） from unequal heating.
A. make
B. cause
C. result
D. produce
[单项选择]On the top of the cylinder is mounted the cylinder cover which is pressed onto （） of the cylinder liner by means of nuts and studs.
A. the camshaft
B. the flange
C. the ridge
D. the bulge
[单项选择]The cylinder oil is pumped into the cylinder (via non-return valves) when the piston rings pass the lubricating orifices during （）
A. the upward stroke
B. the downward stroke
C. the power stroke
D. the suction stroke
[单项选择]The cylinder head, cylinder liner and （） form the combustion chamber.
A. frame
B. piston
C. crankcase
D. explosion plate
[单项选择]（） is used for cylinder and cylinder head, the salt water is used for cooling the lubricating oil, the fresh water in the coolers and the charging air in the air cooler.
A. The fuel oil
B. The lube oil
C. The sea water
D. The fresh water
[单项选择]To counteract these undesirable effects cylinder oils usually contain additives formulated to impart a high degree of （） and detergency.
A. salinity
B. alkalinity
C. acid
D. sanitary
[单项选择]Cylinder lubrication oil for low speed main propulsion diesel engines is admitted to each cylinder during （）.
A. the power stroke
B. the compression stroke
C. low load operation only
D. periods of standby
[单项选择]Which of the listed cylinder liner surface conditions indicates proper lubrication?（）
A. Dull black appearance
B. Bright appearance
C. Thin layer of lacquer
D. Thick oily film
[单项选择]Which of the diesel engine cylinder liners listed has internal cooling water passages?（）
A. Internally finned liner
B. Externally finned liner
C. Wet liner
D. Integral water-jacket liner
[单项选择]A properly honed diesel engine cylinder liner will（）
A. prevent piston ring wear
B. shorten the ring break-in period
C. prevent cylinder liner glazing
D. appear slick and glazed
[单项选择]Why are some diesel engine cylinder liners plated on the wearing surface with porous chromium?（）
A. The chromium will not wear out the piston rings
B. The chromium strengthens the liners in the way of the scavenging air ports
C. Chromium eliminates the need for oil scraper rings
D. Pores in the plating aid in maintaining the lube oil film
[单项选择]Cylinder liners from older lower powered engines had a uniform wall thickness and the cooling was achieved by circulating cooling water through a space formed between （）.
A. crown and skirt
B. liner and jacket
C. ring and groove
D. jacket and block
[单项选择]Exhaust valve openings in a diesel engine cylinder head are made as large as practical to （）
A. increase back pressure during the exhaust process
B. facilitate periodic replacement of the valves
C. reduce the pumping loss associated with scavenging
D. reduce tension on valve springs
[单项选择]Fuel is not supplied to the corresponding cylinder due to a failure of （）.
A. the motor
B. the fresh water generator
C. the governor
D. the fuel pump
