更多"Which of the following should be re"的相关试题:
[单项选择]Which oil is not suitable for use as storm oil?()
A. Fish oil
B. Vegetable oil
C. Mineral oil
D. Animal oil
[单项选择]Burning diesel oil should be treated as which class of fire?()
A. Class "A"
B. Class "B"
C. Class "C"
D. Class "D"
[单项选择]Waste oil should()
A. be treated according to the C-Es command exactly
B. be treated according to MARPOL
C. accumulate in bilges or on tank tops in accordance with MARPOL
D. discharge to sea at the specified areas
[单项选择]Unless such oil tanker carries crude oil which is not suitable for crude oil washing,the oil tanker shall()the system in accordance with the requirements of that Regulation.
A. operate
B. check
C. install
D. overhaul
[单项选择]Before dismantling the pipe, would you ()the oil retained in the hose with ()?
A. flash;fresh air
B. wash;fresh water
C. flush;compressed air
D. rush;diesel oil
[单项选择]How often should the lubricating oil of a diesel engine be changed?()
A. After every trip
B. Every 4000 hours
C. According to manufacturer’s instructions
D. Every time they are shutdown
[单项选择]Which lubricating oil additive is used in diesel engines to reduce the tendency for sludge and varnish to form on the engine parts?()
A. Flash point improvers
B. Pour point improvers
C. Inhibitors
D. Foam suppressors
[单项选择]Corrosive liquids and acids should have which kind of label?()
A. Skull and crossbones
B. Yellow and white
C. Red and white
D. White and black
[单项选择]There should be a lubricating oil () between the main beatings and the crankshaft.
A. film
B. cap
C. lacquer
D. shell
[单项选择]The oil quantity for bearing lubrication should be applied in such an amount as to be sufficient to carry away the () caused by the friction at the bearings.
A. acids
B. additives
C. heat
D. gear
[单项选择]Which of the following fuel oil characteristics establishes the danger point when transferring, pumping, and firing procedures are concerned?()
A. Fire point
B. Flash point
C. Specific gravity
D. viscosity
[单项选择]Lubricating oil should be changed on a heavy duty diesel engine when().
A. it gets dark in color
B. a sample rubbed between fingers feels thin
C. it has been in use for a specified interval
D. it no longer supports combustion
[单项选择]Main propulsion engine lube oil sumps should be constructed ()
A. so as to never be integral lube
B. with a sloped bottom
C. only of nonferrous, noncorrosive metals
D. with drain/return lines terminating just above or at the designed normal level
[单项选择]A centrifugal fuel oil purifier should be shut down if ()
A. more sealing water is needed
B. the cover clamp needs tightening
C. the purifier has a bad vibration when started
D. water is discharged from the overflow line
[单项选择]The oil index of main engine should be controlled to prevent it from in heavy weather()
A. over heat
B. over speed
C. over pressure
D. over worn
[单项选择]Which of the following characteristic of lube oil helps to reduce the amount of deposits in the piston ring belt during the combustion process in a diesel engine?()
A. Low viscosity index
B. Low carbon forming tendencies
C. High film strength
D. High non-corrosive qualities
[单项选择]When jumping into water upon which there is an oil-fire,you should().
A. break the water surface with your hands when diving head-first
B. use your hands to hold your knees to your chest
C. cover your eyes with one hand while pinching your nose shut and covering your mouth with the other
D. enter the water at the bow or stern on the windward side of the vessel
[单项选择]The oil residues which cannot be discharged into the sea in compliance with MARPOL 73/78 shall be().
A. discharged to into special area
B. discharged into national waters
C. discharged into the designated zone
D. retained on board or discharged to reception facilities
[单项选择]The booster pump, which supplies diesel oil to() , should have a possibility of being powered by compressed air or by emergency power.
A. the main engines
B. the auxiliary engines
C. the emergency generator engine
D. the auxiliary engines and the main engine(s)