更多"While taking on fuel, you notice oi"的相关试题:
[单项选择]If there is water in fuel oil, the revolution of the engine will （）.
A. decrease
B. increase
C. be dismantled
D. be reassembled
[单项选择]While loading bunkers, you notice oil on the water near the vesselWhat should you do first?（）
A. Stop loading
B. Notify the harbour administration
C. Determine if the vessel is the source of the pollution
D. Start the main engine and put them in gear to disperse the spill
[单项选择]Machinery driving fuel oil transfer and fuel oil service pumps must be fitted with a remote means of stopping the machinery from （）.
A. within the space concerned
B. outside the space concerned
C. the throttle station
D. within the fire room
[单项选择]You notice oil on the water near your vessel while taking on fuel. You should first（）.
A. stop fueling
B. notify the senior deck officer
C. notify the terminal superintendent
D. determ ne whether your vessel is the source
[单项选择]While loading bulk oil, you notice oil on the water near the bargeWhich of the following actions should you carry out FIRST?（）
A. Search the vessel for leaks
B. Notify terminal superintendent
C. Stop loading
D. Notify the Coast Guard
[单项选择]When you are transferring fuel oil to the setting tanks, precautions to be observed should include （）
A. plugging gooseneck tank vents to prevent accident overflow
B. maintaining a high transfer rate until a slight trickle of oil is observed flowing from the overflow line
C. sounding the tanks frequently and reducing the transfer rate as the level approaches maximum fill
D. maintaining a supply of chemical dispersant to cleanup minor oil spills adjacent to the ship
[单项选择]When separating fuel oil in oil separator, the separating quantity is（） of the real quantity.
A. 100%
B. 80%
C. 1/2
D. 1/3
[单项选择]In an oil cooler circulated by sea water, the oil is at a larger pressure, the result being that any leak in the cooler will mean a loss of （）.
A. oil
B. sea water
C. refrigerant
D. fresh water
[单项选择]Fuel injectors used in heavy fuel oil systems are usually provided with cooling to reduce（）.
A. cold corrosion of the nozzles
B. fuel viscosity for better atomization
C. carbon accumulation on the nozzles
D. fuel detonation in the cylinders
[单项选择]
When fuel oil is accidentally missed with lube oil which of the following processes can be used to separate them?（）
Ⅰ.filtering
Ⅱ.settling
A. Ⅰ only
B. Ⅱ only
C. either Ⅰ or Ⅱ
D. neither Ⅰ or Ⅱ
[单项选择]Diesel engine lube oil diluted with fuel oil is indicated by（）
A. decreased viscosity
B. decreased pour point
C. increased flash point
D. increased viscosity
[单项选择]In a commonly used fuel oil system, the oil is stored in tanks in the double bottom from which it is pumped to （） and heated.
A. a service tank
B. a settling tank
C. an expansion tank
D. a double bottom tank
[单项选择]In a typical fuel oil system, the oil is stored in tanks in the double bottom from which it is pumped to （） and heated.
A. a service tank
B. a collecting tank
C. a sump
D. a settling tank
[单项选择]In an oily water separator the oil will travel （） to the oil collecting spaces.
A. upwards
B. downwards
C. outwards
D. forwards
[单项选择]The pump used to send the bilge water into the oily water separator（）the mixture because this might create finer oil particles.
A. should agitate
B. should not agitate
C. should mix up
D. should not add up
[单项选择]The quality of the fuel oil and lube oil （）, Im afraid.
A. has much to do with the operation of the engine and its life
B. have much to do with the operation of the engine and its life
C. has much doing with the operation of the engine and its life
D. have much doing with the operation of the engine and its life
[单项选择]The oil （） in the discharging water from oil water separator exceeds 15 PPM without alarm, because the coil was burnt out.
A. filter
B. hole
C. pollution
D. content
[单项选择]Diesel engine fuel oil contamination often results in （）
A. governor malfunctions
B. fuel injection system malfunctions
C. high cylinder lube oil temperatures
D. low intake temperatures
