更多"The plunger in a jerk pump is rotat"的相关试题:
[单项选择]In a jerk pump, the amount of fuel that will be forced through the spray nozzle on each upward stroke of the plunger depends on ()
A. the pump supply pressure
B. the slope of the fuel cam
C. how the plunger is rotated
D. the number of sleeve segments engaged with the rack
[单项选择]The plunger may be rotated in the barrel by a rack and () on a sleeve which is keyed to the plunger.
A. pinion arrangement
B. push rod
C. handle bar
D. cam device
[单项选择]Increasing the speed of a centrifugal pump will result in an increase in its capacity in its capacityAnother means of increasing the capacity pump is to increase the()
A. diameter of the discharge piping, with all other factors remaining the same
B. diameter of the suction piping, with all other factors remaining the same
C. width of the impeller only
D. diameter of the impeller
[单项选择]While overhauling a jerk-type fuel pump it is necessary to replace the pump plungerWhich of the parts listed below must also be replaced?()
A. Delivery check valve
B. Pump barrel
C. Tubing to the injector
D. Cam follower
[单项选择]Which pump is the self-priming pump?()
A. turbine
B. centrifugal
C. ejector
D. mixed flow
[单项选择]The ()pump is usually used as the bilge feed pump to an oily water separator.
A. turbine
B. screw
C. vane
D. ejector
[单项选择]A () pump is that where the volume of the pump chamber is alternately increased to draw the liquid in and then decreased to force the liquid out.
A. injector
B. positive displacement
C. centrifugal
D. centripetal
[单项选择]A mixed-flow pump is a () pump classified by the working principle.
A. self priming
B. positive displacement
C. reciprocating
D. impeller
[单项选择]If the plunger or barrel of a fuel injection jerk pump becomes damaged,()
A. only the replacement of the entire pump would be acceptable
B. the injection pump and injection nozzle must be replaced
C. either the barrel or plunger must be replaced
D. the barrel and plunger must be replaced as a unit
[单项选择]Which pump installation would require an external source of sealing water?()
A. Main circulator pump jacket water cooling
B. Salt water service pump
C. Auxiliary condensate pump
D. Bilge pump
[单项选择]A centrifugal pump vibrates excessively during operationUpon disassembling the pump it is found that the impeller is out of balanceWithout an available spare, you should ().
A. drill holes through the heavy side of the impeller until it balances
B. weld counterweights to the light side of the impeller
C. remove metal from the heavy side by machining in a lathe
D. acid wash and serape the heavy side until it balances
[单项选择]A centrifugal pump produces the required pressure energy by means of a rotating () provided with vanes.
A. propeller
B. impeller
C. circumference
D. screw
[单项选择]The boiler feed pump discharge pressure is higher than the steam drum pressure to ().
A. ensure feed water flow into the boiler
B. keep the steam drum pressure high
C. prevent water hammer in the feed line
D. help the feed water flash to steam
[单项选择]Engine fuel pump index is ().
A. the viscosity index
B. the fuel oil contents
C. the starting speed
D. the reading at the rack
[单项选择]The packing installed in the pump stuffing box is lubricated by ().
A. gravity and feed oil cups
B. grease cups
C. hand during installation
D. leakage through the stuffing box
[单项选择]The capacity of a centrifugal pump can be increased by the installation of a larger diameter impeller Another means of increasing the pump capacity is to ().
A. increase speed
B. increase the size of the cardent assembly
C. reduce wearing ring clearances
D. change the pump to a "close coupled" arrangement
[单项选择]If a hydraulic pump on a winch accidentally stops while hoisting,the load will stay suspended because().
A. a check valve will close that prevents reverse circulation
B. a centrifugal counterweight counteracts the force of gravity
C. the electric pump motor will cut out
D. the control lever will move to the stop position
[单项选择]The advantage of a centrifugal pump as compared with a reciprocating pump is that ().
A. discharge is continuous
B. it has no internal valves
C. upon accidental closing of discharge valve, excessive pressure will not build up
D. all of the above are true