更多"The purpose of compressing the air "的相关试题:
[单项选择]The purpose of an air compressor unloading device is to ()
A. drain water from the air receiver
B. drain water from the cylinders
C. delay the compression process until the motor is up to speed
D. check pump alignment
[单项选择]In the suction stroke air is induced into the cylinder ()In the compression stroke the air is compressed.
A. by an fuel valve
B. through an inlet valve
C. with an exhaust valve
D. from an outlet valve
[单项选择]The lube oil to lubricate the surfaces of the cylinder liners is spread over by the ().
A. sliding piston rings
B. engines camshaft
C. small pumps
D. forced feed system
[单项选择]The rate of fuel injection in a diesel engine cylinder depends primarily on ().
A. the size of the holes in the fuel nozzle
B. timing of the pump
C. supply pressure to the pump
D. shape of the combustion chamber
[单项选择]The cooling water jacket is common to all the cylinders but there are often () to ensure that each cylinder receives the right amount and flow of water.
A. dividing walls
B. divided walls
C. dividing liners
D. divided jackets
[单项选择](Piston area)X(Piston stroke)K(numbers of the cylinders)=engine()
A. brake horsepower
B. displacement
C. cylinder volume
D. cylinder clearance
[名词解释]General purpose registers
[单项选择]The air compressor pumps air to the().
A. engine cylinder
B. air bottle
C. evaporator
D. condenser
[单项选择]The compressed air is supplied by () to the air reservoirs.
A. compressors
B. forced fans
C. ventilators
D. generators
[单项选择]The air filter is fixed in the () of an air compressor.
A. inlet pipe
B. outlet pipe
C. inter cooler
D. after cooler
[单项选择]The principal purpose of magnetic compass adjustment is to().
A. reduce the variation as much as possible
B. reduce the deviation as much as possible
C. reduce the magnetic dip as much as possible
D. allow the compass bowl to swing freely on its gimbals
[单项选择]Air receivers installed in starting air systems are to be ().
A. cylindrical in shape with service connections located at the top and bottom
B. opened and made available for inspection during biannual inspections provided
C. with automatic drain traps for the removal of moisture
D. so installed as to make the drain connections effective under extreme conditions of trim
[单项选择]Air entering an air-cooled refrigeration system is indicated by ().
A. frosting of the liquid line
B. higher than normal head pressure
C. a clear sight glass
D. abnormally cold reefer boxes
[单项选择]Air line lubricators are used in compressed air systems to lubricate ().
A. the suction and discharge valves
B. tools and equipment served by compressed air
C. air line reducing valves
D. all of the above
[单项选择]Air conditioning is the process of treating air to control () its temperature, humidity, cleanliness and distribution to meet the comfort requirements of the occupants of the conditioned space.
A. instantaneous
B. instantaneously
C. simultaneous
D. simultaneously
[单项选择]In reference to air conditioning, when air attains the maximum amount of moisture it can hold at a specific temperature, it is said to be ().
A. superheated
B. saturated
C. condensed
D. convected
[单项选择]The quantity of cooled air delivered by an air conditioning unit should () the sum of the quantity of air re-circulated to the unit and the quantity mechanically exhausted.
A. balance
B. not balance
C. be more than
D. be less than
[单项选择]() supplies pilot air to control the cylinder air start valves.
A. An air compressor
B. An indicator cock
C. An air distributor
D. A safety valve