更多"Early fuel injection timing is indi"的相关试题:
[单项选择]Late fuel injection timing is indicated by ()
A. lower than normal cylinder pressure and low exhaust temperature
B. lower than normal cylinder pressure and high exhaust temperature
C. higher than normal cylinder pressure and low exhaust temperature
D. higher than normal cylinder pressure and high exhaust temperature
[单项选择]Early injection timing is indicated by ().
A. high exhaust temperature and low firing pressure
B. high exhaust temperature and high firing pressure
C. low exhaust temperature and low firing pressure
D. low exhaust temperature and high firing pressure
[单项选择]With VIT unit the timing of fuel injection of an engine can be regulated automatically according to the ().
A. ship draft
B. pitch
C. engine load
D. oil viscosity
[单项选择]With () unit the timing of fuel injection of an engine can be regulated automatically.
A. MBT
B. MEG
C. VSG
D. VIT
[单项选择]If the diesel engine fuel injection timing is changed to delay the start of injection until the pistons are at top dead center, the engine will()
A. backfire through the air intakes
B. develop less power under load
C. have high firing pressures
D. lift its cylinder relief valves
[单项选择]When fuel is injected late into a diesel engine cylinder,().
A. the exhaust will be clear
B. fuel consumption will be low
C. all the fuel will be burned at top dead center
D. fuel consumption will be high
[单项选择]Fuel injection systems meter fuel, atomize fuel, and ().
A. create turbulence in the combustion chamber
B. aid in completing cylinder scavenging
C. inject fuel at the proper time
D. minimize fuel penetration into the cylinder
[单项选择]Machinery driving fuel oil transfer and fuel oil service pumps must be fitted with a remote means of stopping the machinery from ().
A. within the space concerned
B. outside the space concerned
C. the throttle station
D. within the fire room
[单项选择]Fuel injectors used in heavy fuel oil systems are usually provided with cooling to reduce().
A. cold corrosion of the nozzles
B. fuel viscosity for better atomization
C. carbon accumulation on the nozzles
D. fuel detonation in the cylinders
[单项选择]During the fuel injection period, fuel pressure must exceed cylinder gas pressure to ().
A. ensure penetration and distribution of the fuel in the combustion chamber
B. ensure the needle valve is flushed clean during each injection
C. prevent combustion gas blowback into the open needle valve
D. prevent reflected pressure waves when the needle valve closes
[单项选择]A fuel leak occurs in the high pressure fuel piping between the injection pump and fuel nozzleThis requires immediate repair because of the ()
A. high cost of fuel
B. serious fire hazard
C. possibility of pollution
D. poor combustion which will occur in that cylinder
[单项选择]Air in the fuel lines to the fuel injection nozzles of a diesel will result in ().
A. lower compression pressures
B. overheating without smoking
C. failure to start
D. a run away without load
[单项选择]The fuel injector injects a fine spray of fuel into the hot air and combustion (), producing much high pressure in the gases.
A. has begun
B. takes place
C. occurs
D. happens
[单项选择]A fuel line breaks, sprays fuel on the hot exhaust manifold, and catches fire. Your first action should be to().
A. Batten down the engine room
B. start the fire pump
C. apply carbon dioxide to the fire
D. shut off the fuel supply
[单项选择]The fuel booster pump and steam to fuel heater, together with fuel pipe heater tracer line should be shut off as soon as the () order is acknowledged.
A. finished with engines
B. stop
C. stand by
D. full ahead
[单项选择]The high-pressure fuel opens the fuel valve and is sprayed into the cylinder in tiny droplets known as ().
A. injection
B. penetration
C. atomization
D. compression
[单项选择]()is harmful for fuel pumps, fuel valves, cylinder liner, exhaust valve seats, and the turbocharger blades as well.
A. Bad combustion of the fuel
B. Bad atomization of the fuel
C. Liquid contaminants
D. Solid contaminants