更多"In a fixed displacement axial pisto"的相关试题:
[单项选择]A variable displacement system of hydraulic drives consists of （）.
A. a variable displacement axial piston pump
B. a constant displacement axial piston pump
C. a reciprocating piston pump
D. a centrifugal pump
[单项选择]With reference to an axial piston pump, which one of the following statements is true?（）
A. The cylindrical barrel is coupled to the motor
B. The cylindrical barrel has an odd number of bores
C. The bores end in sockets
D. The sockets fit in the swash plate
[单项选择]The delivery rate of an axial-piston hydraulic pump is controlled by varying the position of the （）.
A. sliding block
B. pintle
C. reaction ring
D. tilting box or swash plate
[单项选择]An axial轴向 piston pump differs from a radial piston pump as the pistons of an axial piston pump are positioned （）.
A. radially from the shaft
B. parallel to each other and to the shaft
C. parallel to each other but at a right angle to the shaft
D. at an angle to each other and to the shaft
[单项选择]An axial piston, variable stroke pump is used in a vessels hydraulic steering gearUnder pressure, oil continually leaks out from between the valve plate/cylinder barrel and will（）.
A. cause loss of hydraulic oil from the system
B. result in extreme damage to the pump
C. cause damage to the pump ff not continually drained from the pump casing
D. result in the system high side pressure to substantially drop off
[单项选择](Piston area)X(Piston stroke)K(numbers of the cylinders)=engine（）
A. brake horsepower
B. displacement
C. cylinder volume
D. cylinder clearance
[单项选择]Abnormal crankpin bearing and piston skirt surface wear indicate（）
A. a restricted air intake
B. a clogged connecting rod oil passage
C. incorrect connecting rod alignment
D. high cylinder firing temperatures
[单项选择]Piston cooling fins are located（）
A. atop the piston crown
B. beneath the piston crown
C. at the base of the piston skirt
D. inside the cylinder liner cooling water jacket
[单项选择]Insufficient end clearance on newly fitted piston rings in a diesel enginewill cause the rings to（）
A. jam in the most worn part of the cylinder when the rings expand
B. break in the most worn part of the cylinder when the rings expand
C. wear eccentrically on the side opposite the end gap
D. overheat and jam at the top center on the combustion stroke
[单项选择]Broken piston rings manifest themselves during the scavenge port inspection by（）
A. Lack of elastic tension, when the rings are pressed into the groove by means of a stick
B. Blackish appearance
C. Fractured rings and missing rings
D. all off the above
[单项选择]The engine is reversed by axial displacement of the camshafts In order for this to be carried out, the cams are （） with inclined transition faces.
A. lathed
B. shaped
C. shrunk
D. developed
[单项选择]Attempts are made to eliminate axial thrust in centrifugal pump by （）.
A. providing the impeller with balancing holes
B. the use of symmetrical impeller
C. neither A nor B
D. either A or B
[单项选择]The delivery rate of a variable stroke axial piston hydraulic pump is controlled by varying the position of the （）.
A. slide block
B. tilting box
C. pintle
D. reaction ring
[单项选择]The function of diesel engine piston compression rings is to （）.
A. prevent piston side thrust
B. prevent engine friction losses
C. transmit heat from the piston to the cylinder liner
D. remove oil from the cylinder combustion space
[单项选择]The piston supporting body is mainly subjected to （） stress.
A. pushing
B. centrifugal
C. stretch
D. compressive
[单项选择]The piston rings are manufactured with a diameter （） the bore of the cylinder.
A. larger than
B. smaller than
C. equal to
D. none of the above
[单项选择]Improperly fitted piston rings in a diesel engine can cause（）
A. excessive lube oil consumption
B. lower than normal lube oil temperature
C. higher than normal exhaust back pressure
D. excessive crankshaft end play
[单项选择]When inspecting piston rings through the ports of a two-stroke/cycle diesel engine, black areas on the sealing surfaces are the result of （）
A. insufficient lubrication
B. improper piston cooling
C. blow-by
D. overload operation
[单项选择]Visual inspection of chrome-plated piston compression rings reveals a black ring face at the position of the cylinder liner portsThis condition indicates a ring which（）
A. has a crown-face
B. exceeds wear limits through normal wear
C. has excessive blow-by
D. is in good condition
