更多"In most pumps and pump motors overp"的相关试题:
[单项选择]Hydraulic pumps most commonly used in steering systems are of the （）.
A. lobe type
B. screw type
C. axial piston type
D. volute type
[单项选择]Most pump manufacturers recommend that the suction piping dimension for centrifugal pumps be （）.
A. one size smaller than the pump suction nozzle
B. the same size as the pump suction nozzle
C. one size larger than the pump suction nozzle
D. installed with a short radius elbow at the pump
[单项选择]Most pump manufacturers recommended that the discharge piping for centrifugal pumps be （）.
A. one size larger than the pump discharge nozzle
B. the same size as the pump discharge nozzle
C. one size smaller than the pump discharge nozzle
D. installed with a short radius elbow at the pump
[单项选择]Which of the following pumps will most affect oily water separator performance and give the worst result?（）
A. reciprocating pump
B. vane pump
C. screw pump
D. centrifugal pump
[单项选择]Which of the following pumps is most suitable for an oily water separator?（）
A. reciprocating pump
B. vane pump
C. mono pump
D. axial-flow pump
[单项选择]The most suitable pump for oily water separator feed duties is （）.
A. a reciprocating pump
B. a vane pump
C. a centrifugal pump
D. a triple screw pump
[单项选择]Overgreasing of ball bearings installed on pumps will result in （）.
A. smoother pump operation
B. overheating of the bearing
C. reduced corrosion in the bearing
D. increased pump capacity
[单项选择]Gear pumps are of positive displacement type pumps because they discharge a near constant amount of liquid （） pressure.
A. depending on
B. in relative to
C. regardless of
D. because of
[单项选择]Which pump is the self-priming pump?（）
A. turbine
B. centrifugal
C. ejector
D. mixed flow
[单项选择]A （） pump is that where the volume of the pump chamber is alternately increased to draw the liquid in and then decreased to force the liquid out.
A. injector
B. positive displacement
C. centrifugal
D. centripetal
[单项选择]The （）pump is usually used as the bilge feed pump to an oily water separator.
A. turbine
B. screw
C. vane
D. ejector
[单项选择]A mixed-flow pump is a （） pump classified by the working principle.
A. self priming
B. positive displacement
C. reciprocating
D. impeller
[单项选择]Positive displacement, helical gear pumps are well suited for pumping oil because （）
A. stuffing boxes eliminate the leakage problems usually associated with other gear pumps
B. it is not necessary to closely maintain design clearances with this pump
C. they are essentially self-priming and produce a high suction lift
D. these pumps are designed with extreme tooth angled
[单项选择]Regulations require that cargo pumps in tankers carrying grade D liquid cargo shall be isolatedfrom sources of vapor ignition by（）.
A. cofferdams
B. gastight bulkheads
C. passageways or living quarters
D. general cargo spaces
[单项选择]Cooling water pumps driven by direct reversing diesel engines are usually of the straight impeller vane type pump with a concentric housing to（）
A. facilitate bi-directional operation
B. provide the greatest pump efficiency
C. prevent pump clogging from marine growth
D. prevent cavitation at the pump outlet
[单项选择]Which of the following pumps belongs to centrifugal pump?（）
A. Piston pump
B. Screw pump
C. Diffuser pump
D. Water-ring pump
[单项选择]Centrifugal pumps are popular because they are very simple in construction,and produce smooth, constant, （） discharge.
A. non-pulsating
B. pulsating
C. positive
D. non-positive
[单项选择]
Which of the following pumps will build up a bursting pressure or stall their motors if the discharge valves are closed?（）
(1) gear
(2) centrifugal
(3) screw
A. （1）and（2）
B. （1），（2）and（3）
C. （1）and（3）
D. （2）and（3）
