更多"A fully loaded motor-propelled life"的相关试题:
[单项选择]Blocks and falls used as lifeboat gear must be designed with a minimum safety factor of（）.
A. 4，based on the breaking strength
B. 5，based on the maximum allowable stress
C. 6，based on the maximum working load
D. 8，based on the normal working load
[单项选择]When using the lifeboat compass，you must be careful to（）.
A. set it on the centerline of the boat
B. apply the correction for compass error
C. keep metal objects away from it
D. All of the above
[单项选择]Each lifeboat must be lowered and maneuvered in the water at least once every（）.
A. 2 months
B. 3 months
C. 4 months
D. 5 months
[单项选择]All the holds to be loaded with grain must be swept（）commencement of loading.
A. Cleanly/during
B. Clear/meanwhile
C. Clean/between
D. Clean/prior to
[单项选择]The pivoting point of a fully loaded vessel with normal trim proceeding ahead at sea speed is（）.
A. right at the bow
B. one-third the length of the vessel from the bow
C. one-half the length of the vessel from the bow
D. two-thirds the length of the vessel from the bow
[单项选择]If a full cargo is not loaded，the Charterer must pay not only freight on the goods actually shipped but also（）.
A. broken space
B. dead weight
C. constant
D. dead freight
[单项选择]Your tank vessel is fully loaded, and you find that she is down slightly by the head. To adjust the trim, you may（）.
A. add ballast aft
B. load more cargo aft
C. shift cargo aft
D. All of the above
[单项选择]When a ship is fully loaded, it needs to prevent the main engine to be（）.While a ship is fully empty, it needs to prevent the main engine to be（）.
A. overspeed；overload
B. overload；overspeed
C. over mechanical load；over thermal load
D. over torque；overspeed
[单项选择]The cargo must be loaded within the time stipulated by the charter-party，otherwise the Charterer will have to pay（）.
A. despatch
B. demurrage
C. detention
D. damage
[单项选择]In an open lifeboat，the lifeboat compass is usually（）.
A. placed in a fixed bracket when being used
B. clamped to any position convenient for the coxswain to see it
C. permanently mounted on the lifeboat's centerline
D. mounted in the center of the boat to eliminate deviation
[单项选择]Lifeboat hatchets should be（）.
A. kept in a locker
B. secured at each end of the boat with a lanyard
C. kept next to the boat coxswain
D. kept in the emergency locker on the ship and brought to the lifeboat when needed
[单项选择]Which statement is TRUE concerning lifeboat gripes?（）
A. They must be released by freeing a safety shackle
B. They should not be released until the boat is in lowering position
C. They may be adjusted by a turnbuckle
D. They are normally used only with radial davits
[单项选择]The lifeboat is constructed of（）
A. totally enclosed
B. glass-reinforced plastic
C. self-righting
D. powered
[单项选择]Number 3 lifeboat would be（）.
A. the forward boat on the starboard side
B. behind boat number 1 on the port side
C. behind boat number 1 on the starboard side
D. behind boat number 2 on the port side
[单项选择]Preventer bars are fitted on lifeboat releasing hooks to prevent（）.
A. the falls from unhooking if the releasing gear is operated accidentally while the boat is being lowered
B. operation of the release lever until the boat is waterborne
C. the falls from rehooking after they have been released
D. accidental unhooking when the falls become slack
