更多"The distance between the two NAVTEX"的相关试题:
[单项选择]The distance between any two meridians measured along a parallel of latitude （）.
A. increases in north latitude and decreases in south latitude
B. decreases as DLO increases
C. increases with increased latitude
D. decreases with increased latitude
[单项选择]The shortest distance between any two points on earth defines a（）.
A. small circle
B. great circle
C. rhumb line
D. hyperbola
[单项选择]A call between any two ship stations on an intership working frequency shall have a maximum duration of（）.
A. 2 minutes
B. 3 minutes
C. 4 minutes
D. 5 minutes
[单项选择]What is the crank angle between any two crank throws in the firing order of a four-stroke/cycle, in line, eight cylinder diesel engine?（）
A. 45
B. 60
C. 90
D. 100
[单项选择]One of the differences between a two-stroke engine and a four-stroke engine is,（）
A. a two-stroke engine works without exhaust operation
B. a two-stroke engine works without compression stroke
C. a two-stroke engine works without expansion stroke
D. a two-stroke engine works without suction operation
[单项选择]Please draw out a 0l mm shim between the two halves of the bearing （） the clearance.
A. to reduce
B. to increase
C. and reduce
D. and increase
[单项选择]Please draw out a 01 mm （） between the two halves of the bearing to reduce the clearance.
A. shim
B. gasket
C. washer
D. packing
[单项选择]The distance between the surface of the water and the tidal datum is the （）.
A. range of tide
B. height of tide
C. charted depth
D. actual water depth
[单项选择]Air gap is the vertical distance between the bottom of the hull and the（）.
A. still water level
B. wave crest
C. wave crest plus the charted water depth and tidal corrections
D. wave crest plus the charted water depth and tidal correction and storm surge
[单项选择]The distance between the bottom of the hull and the waterline is called （）.
A. tonnage
B. reserve buoyancy
C. draft
D. freeboard
[单项选择]The distance between rivets in a row is known as the（）.
A. arm
B. pitch
C. gage
D. rivet distance
[单项选择]The vertical distance between G and M is used as a measure of（）.
A. stability at all angles of inclination
B. initial stability
C. stability at angles less than the limit of positive stability
D. stability at angles less than the downflooding angle
[单项选择]The operation between two fuel injections is called a （）.
A. turning cycle
B. working cycle
C. working hour
D. working stroke
[单项选择]The division of kilowatt load between two paralleled alternators is determined by the （）
A. amount of field excitation of the leading machine
B. load-speed characteristics of the governors
C. amount of field excitation to the lagging machine
D. type of alternator
[多项选择]CDP is running between two TestKing devices. What information is supplied by CDP?（）
A. Device identifiers
B. Capabilities list
C. Platform
D. Route identifier
E. Neighbor traffic data
[单项选择]The load between two steam-driven alternators operating in parallel may be adjusted by varying （）
A. the speed of the alternators
B. the field strength of the machines
C. the power factor of the alternators
D. steam supply to the prime movers
