更多"[单选题]xGW GGSN中，需要把手机地址池平均分配到（）上。
In"的相关试题:
[单选题]xGW GGSN中，需要把手机地址池平均分配到（）上。
In xGW GGSN, addresses in the IP address pool of MS must be assigned to ( ) averagely.
A.GSU Group
B.CU Group
C.SLB Group
D.xDPI Group
[判断题]xGW GGSN一个APN可以关联多个地址池，一个地址池也可以被多个APN共享。
A.正确
B.错误
[判断题]关于xGW(PDSN)，当地址池利用率超过80%时触发地址池过负荷3级告警。
A.正确
B.错误
[单选题]ZXUN-xGW GGSN新增动态地址池后会自动生成ACL。由于全局ACL条目有限制，需要合理规划地址池。下列地址段配置生成ACL最少的是（ ）。
The ZXUN-xGW GGSN will generate an ACL when a new local IP pool is added. Since the global number of ACL entries is limited, we need to plan the IP pool reasonably. On the following address segment, the number of ACL entries is the least: ( ).
A.segment 10.123.1.0 10.123.1.255 mask 255.255.255.0 cpulocation 2/1
B.segment 10.123.1.1 10.123.1.254 mask 255.255.255.0 cpulocation 2/1
C.segment 10.123.1.1 10.123.1.255 mask 255.255.255.0 cpulocation 2/1
D.segment 10.123.1.2 10.123.1.255 mask 255.255.255.0 cpulocation 2/1
[多选题]xGW配置ip地址池的时候，有哪些模式？
When you configure the IP address pool of the xGW, you can configure it in the following modes: ( ).
A.local
B.static
C.assigned
D.aaa
[单选题]关于xGW(PDSN)，分配静态IP时，地址池类型必须被配置为（）。
On the xGW (PDSN), during assignment of static IP addresses, the IP address pool type must be set to ( ).
A.local
B.aaa
C.static
D.assigned
[判断题]xGW GGSN添加或删除地址池操作应在业务闲时进行操作。
A.正确
B.错误
[单选题]关于xGW(PDSN)，在PPP协商过程中，IP地址池在哪个过程中分配？
A.LCP
B.Authentication
C.IPCP
D.HDLC-like
[单选题]关于xGW(PDSN)，分配静态IP时，地址池类型必须被配置为（）。
A.local
B.aaa
C.static
D.assigned
[单选题]关于xGW(PDSN)，在PPP协商过程中，IP地址池在哪个过程中分配？
On the xGW(PDSN), during PPP negotiation, IP addresses are allocated from the IP address pool during the ( ) phase.
A.LCP
B.Authentication
C.IPCP
D.HDLC-like
[单选题]xGW GGSN一般不需要对接的设备是（）。
xGW GGSN generally does not need to connect to ( ).
A.OCS
B.PCRF
C.SGSN
D.HLR
[多选题]xGW系统升级需要备份的MPU配置数据主要包括（）目录。
Before upgrading the xGW system, we need to back up MPU configuration data, mainly including the following directories: ( ).
A.DATA0
B.DATA1
C.config
D.vmm
[多选题]当使用LMT工具维护V4xGW时，需要使用Winnttcp来查询链路状况，当表示链路的线为红色时表示异常，应如何排查？
A.排除LMT上的故障，如LMT配置有误等。
B.重启设备。
C.通过Ping方式来检查物理链路是否有问题。
D.检查前台上各个单板的运行状态，测试是否有业务异常的现象。
[单选题]xGW同LIG进行对接时，需要哪些地址互通？（ ）
When the xGW interconnects with the LIG, it needs to communicate with the following IP addresses: ( ).
A.需要同LIG的1/2口互通就可以了。
It only needs to communicate with X1 and X2 interfaces of the LIG.
B.需要同LIG的1/2互通，LIG的3口媒体面互通。
It needs to communicate with X1 and X2 interfaces of the LIG, and the media plane of X3 interface on the LIG.
C.需要同LIG的1/2口互通，LIG的3口信令面互通。
It needs to communicate with X1 and X2 interfaces of the LIG, and the signaling plane of X3 interface on the LIG.
D.需要同LIG的1/2口互通，LIG的3口信令和媒体面都要互通。
It needs to communicate with X1 and X2 interfaces of the LIG, and signaling and media planes of X3 interface on the LIG.
[多选题]xGW配置文件离线升级，需要使用到的文件包括（）。
During xGW offline upgrade through configuration files, we need to use the following files: ( ).
A.xGW1_COMM_CFG_DB.ZDB
B.xGW1_GGSN_CFG_DB.ZDB
C.xGW1_COMM_SECOND_CFG_DB.ZDB
D.xGW1_XDPI_CFG_DB.ZDB
