更多"On which types of network will OSPF"的相关试题:
[单项选择]Which description regarding OSPF Network LSAs is correct?（）
A. They are originated by Area Border Router and are sent into a single area to advertise an Autonomous System Border Router.
B. They are originat ed by Area Border Routers and are sent into a single area to advertise destinations outside that area.
C. They are originated by the DR on every multi - access network. They include all attached routers including the DR itself.
D. They are originated by every router in the OPSF network. They include all routers on the link, interfaces, the cost of the link, and any known neighbor on the link.
[单项选择]Which command enables OSPF for IPv6?（）
A. router ospf ipv6 process - id
B. ipv6 ospf process - id
C. router ospf process - id
D. ipv6 router ospf process - id
[单项选择]Which types of portable fire extinguishers are designed for use on electrical fires?（）
A. Dry chemical and carbon dioxide
B. Foam (stored pressure) and soda-acid
C. Carbon dioxide and foam (stored pressure)
D. Dry chemical and soda-acid
[单项选择]Which of the following OSPF messages contains entire complete LSAs used during the database exchange process?（）
A. LSR
B. LSAck
C. LSU
D. DD
E. Hello
[单项选择]Which command would display OSPF parameters such as filters，default metric，maximum paths，and number of areas configured on a outer（）
A. show ip protocol
B. show ip route
C. show ip ospfinterface
D. show ip ospf
E. show ip nterface
F. None of the other alternatives apply
[多项选择]On what kinds of networks does OSPF elect a backup designated router?（）
A. Point-to-point
B. Point to multipoint
C. Broadcast
D. Non-broadcast multi-access
[单项选择]In JUNOS software, which would prevent an OSPF router from importing the 10.0.0.4/30 summaryroute?（）
A. Import policies are not allowed for internal routes, so this is not possible.
B. Export policies are not allowed, so this is not possible.
C. Apply a firewall filter matching 10.0.0/4/30 and reject the route.
D. Apply an import policy matching 10.0.0.4/30 and reject the route.
[多项选择]Which three statements about OSPF areas are true?（）
A. Areas introduce a boundary on the link - state updates.
B. Areas are logical definitions specific to any given router.
C. All routers within an area have the exact link - state database.
D. The calculation of the Dijkstra algorithm on a router is limited to changes within an area.
E. The area designated router will always have a priority of 0.
[多项选择]Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?（）
A. Router(config-router)# network 192.168.10.0 0.0.0.255 0
B. Router(config-router)# network 192.168.10.0 0.0.0.255 area 0
C. Router(config-router)# network 192.168.10.0 255.255.255.0 area 0
D. Router(config)# router ospf 0
E. Router(config)# router ospf 1
[多项选择]Which is true about OSPF router-id?（）
A. It is used for type 1 router LSA
B. Highest IP address of the loopback is used
C. router-id needs to be matched on ospf neighbors
D. router-id is 16 bit
[单项选择]An administrator types in the command router ospf 1 and receives the er ror message: "OSPF process 1 cannot start." (Output is omitted.) What should be done to correctly set up OSPF？（）
A. Ensure that an interface has been configured with an IP address
B. Ensure that IP classless is enabled
C. Ensure that the interfaces can ping their directly connected neighbors
D. Ensure that an interface has been configured with an IP address and is up
[多项选择]Which three authentication options does OSPF support?（）
A. DES
B. MD5
C. Kerberos
D. unauthenticated
E. simple password
[多项选择]Which two OSPF LSA types are new in OSPF version 3？ （）
A. Link
B. NSSA external
C. Network link
D. Intra-area prefix
E. AS domain
[单项选择]How many OSPF authentication types can be configured on a subinterface using JUNOS software?（）
A. 0
B. 1
C. 2
D. 3
[多项选择]Which three restrictions apply to OSPF stub areas?（）
A. The area cannot be a backbone area.
B. Inter area routes are suppressed.
C. The area has no more than 10 routers.
D. No virtual links are allowed.
E. No autonomous system border routers are allowed.
F. Redistribution is not allowed unless the packet is changed to a type 7 packet.
[单项选择]Which OSPF area type allows for the flooding of a Type 7 LSA?（）
A. stub
B. transit
C. border
D. not-so-stubby
[单项选择]Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router？（）
A. A virtual link to area 0.
B. OSPF summarization command.
C. default - cost extension to the area command.
D. no - summary extension to the area stub comm and.
E. None of the other alternatives apply
[单项选择]Which command allows viewing of only OSPF routes?（）
A. show ip ospf route
B. show ip route protocol ospf
C. show route protocol ospf
D. show ospf table
