更多"Which single access list statement "的相关试题:
[单项选择]Which one of the access control list statements below will deny all telnet connections to subnet 10.10.1.0/24?（）
A. access-list 15 deny telnet any 10.10.1.0 0.0.0.255 eq 23
B. access-list 115 deny udp any 10.10.1.0 eq telnet
C. access-list 15 deny tcp 10.10.1.0 255.255.255.0 eq telnet
D. access-list 115 deny tcp any 10.10.1.0 0.0.0.255 eq 23
E. access-list 15 deny udp any 10.10.1.0 255.255.255.0 eq 23
[单项选择]Which of the following access list statements would deny traffic from a specifichost?（）
A. Router(config)# access-list 1 deny 172.31.212.74 any
B. Router(config)# access-list 1 deny 10.6.111.48 host
C. Router(config)# access-list 1 deny 172.16.4.13 0.0.0.0
D. Router(config)# access-list 1 deny 192.168.14.132 255.255.255.0
E. Router(config)# access-list 1 deny 192.168.166.127 255.255.255.255
[单项选择]Which command shows if an access list is assigned to an interface?（）
A. show ip interface [interface] access-lists
B. show ip access-lists interface [interface]
C. show ip interface [interface]
D. show ip access-lists [interface]
[单项选择]Which command is required to apply an access list on a virtual terminal line of a router?（）
A. Router(config-line)# access-class 10 in
B. Router(config-if)# ip access-class 23 out
C. Router(config-line)# access-group 15 out
D. Router(config-if)# ip access-group 110 in
E. Router(config-line)# access-list 150 in
F. Router(config-if)# ip access-list 128 out
[单项选择]On which options are standard access list based?（）
A. source address and subnet mask
B. destination address and wildcard mask
C. source address and wildcard mask
D. destination address and subnet mask
[单项选择]The force acting on a single cargo runner which is vertically lifting or lowering a load is greatest when（）.
A. decelerating when lowering the load
B. decelerating when raising the load
C. lowering the load at constant speed
D. raising the load at constant speed
[单项选择]Which command will list all subsystem resources on a server？（）
A. lssrc a
B. lssrc g
C. lssrc l
D. lssrc -s
[单项选择]Which remote access VPN addressing technique supports a static IP address to support a specific application?（）
A. Use a staticip addresses based on incoming user policies.
B. Use DHCP to assign addresses based on incoming user policies.
C. Deploy a clientless model to assign a unique address to the user.
D. Deploy RADIUS or LDAP to assign the address to the user.
[单项选择]Which list is NOT required to be provided as part of the appendices of the Shipboard Oil Pollution Emergency Plan?（）
A. A list of agencies or officials of Coastal State Administrators responsible for receiving and processing incident reports
B. A list of agencies or officials in regularly visited ports
C. A list specifying who will be responsible for informing the parties listed and the priority in which they must be notified
D. A list of personnel duty assignments
[单项选择]When installing a wireless access point, which of the following should the technician perform FIRST?（）
A. Enable MAC filtering.
B. Download and install the latest firmware.
C. Disable DHCP.
D. Change the default password.
[单项选择]Which switching engine enables the access control list lookup to be committed to hardware? （）
A. IETF
B. PFC
C. ASIC
D. TCAM
[单项选择]When using keyboard shortcuts, which single keystroke combination allows users to erase the entire current command?（）
A. Ctrl + a
B. Ctrl + e
C. Ctrl + u
D. Ctrl + w
[单项选择]Which configuration parameter on a Junos device alters the default next-hop resolution behavior of a static route?（）
A. no-readvertise
B. resolve
C. preference
D. passive
[单项选择]Which command displays the IPNCP parameters for all connected PPPoA subscribers?（）
A. show users
B. show subscriber
C. show ppp interface
D. show ppp interface status ip
[多项选择]A network administrator has configured access list 172 to prevent Telnet and ICMP traffic from reaching a server with the address if 192.168.13.26. Which command can the administrator issue to verify that the access list is working properly?（）
A. Router# ping 192.168.13.26
B. Router# debug access-list 172
C. Router# show open ports 192.168.13.26
D. Router# show access-list
E. Router# show ip interface
[多项选择]A single 802.11g access point has been configured and installed in the center of a square office. A few wireless users are experiencing slow performance and drops while most users are operating at peak efficiency. What are three likely causes of this problem?（）
A. mismatched TKIP encryption
B. null SSID
C. cordless phones
D. mismatched SSID
E. metal file cabinets
F. antenna type or direction
