更多"Refer to the exhibit. When running "的相关试题:
[多项选择]In EIGRP, what kind of route information is stored in the RAM of the router and maintained by way of hello packets and update packets?（）
A. Neighbor Table
B. SRF Table
C. RTP Table
D. Topology Table
E. Query Table
F. Dual Table
[多项选择]What two things will a router do when running a distance vector routing protocol? （）
A. Send periodic updates regardless of topology changes.
B. Send entire routing table to all routers in the routing domain.
C. Use the shortest-path algorithm to the determine best path.
D. Update the routing table based on updates from their neighbors.
E. Maintain the topology of the entire network in its database.
[单项选择]When troubleshooting an EIGRP connectivity problem, you notice that two connected EIGRP routers are not becoming EIGRP neighbors. A ping between the two routers was successful.What is the next thing that should be checked?（）
A. Verify that the EIGRP hello and hold timers match exactly.
B. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP peer command.
C. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP traffic command.
D. Verify that EIGRP is enabled for the appropriate networks on the local and neighboring router.
[单项选择]Anchors are prevent from running out when secured by the（）.
A. brake
B. devil's claw
C. pawls
D. All of the above
[单项选择]Anchors are prevented from running out when secured by the（）.
A. brake
B. devil's claw
C. pawls
D. All of the above
[单项选择]In what location are EIGRP successor routes stored?（）
A. In the routing table only.
B. In the neighbor table only.
C. In the topology table only.
D. In the routing table and neighbor table.
E. In the routing table and topology table.
F. In the topology table and neighbor table.
[单项选择]When EIGRP is used as the PE-CE routing protocol which of these statements is correct?（）
A. EIGRP can be used only as the PE-CE routing protocol if the PE and CE routers are in the same AS
B. Other EIGRP AS routes are automatically advertised to the CE router and do not require a redistribution configuration command to be configured
C. Unlike other routing protocols that are used between PE and CE routers, EIGRP supports backdoor links
D. Configure of the VPN is only required on the PE router
[单项选择]What does a router do if it has no EIGRP feasible successor route to a destination network and the successor route to that destination network is inactive status?（）
A. It routes all traffic that is addresses to the destination network to the interface indicates in the routing table.
B. It sends a copy of its neighbor table to all adjacent routers.
C. It sends a multicast query packet to all adjacent neighbors requesting available routing paths to the destination network.
D. It broadcasts Hello packets to all routers in the network to re-establish neighbor adjacencies.
[单项选择]Refer to the exhibit.What is the reason that the interface status is “administratively down,line protocol down”?（）
A. There is a mismatch in encapsulation types
B. The wrong type of cable is connected to the interface
C. The interface has been configured with the shutdown command
D. The interface is not receiving any keepalives
E. The interface needs to be configured as a DTE device
F. There is no encapsulation type configured
[单项选择]Refer to the exhibit.What is the effect of the configuration that is shown?（）
A. It tells the router or switch to try establish an SSH connection first and if that fail to use telnet.
B. It configures a cisco network device to use the SSH protocol on incoming communications via the virtual terminal ports.
C. It allows seven failed login attempts before the VTY lines are temporarily shutdown.
D. It configures the virtual terminal lines with the password 030752180500.
E. It configures SSH globally for all logins.
[单项选择]Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?（）
A. The Serial0/0 interface is passing traffic.
B. The DLCI 100 was dynamically allocated by the router
C. The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server
D. The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud
E. The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP
[多项选择]CDP is running between two TestKing devices. What information is supplied by CDP?（）
A. Device identifiers
B. Capabilities list
C. Platform
D. Route identifier
E. Neighbor traffic data
[多项选择]Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? （）
A. Router1 has specific boot system command that instruct it to load IOS from TFTP server.
B. Router1 is acting as a TFTP server for other routers.
C. Router1 cannot locate a valid IOS image in flash memory.
D. Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.
E. Cisco routers will first attempt to load a image from TFTP for management purposes.
[单项选择]What is NOT running rigging（）.
A. Downhaul
B. Backstay
C. Halyard
D. Sheet
[单项选择]What does the term computer language refer to?（）
A. Binary
B. Decimal
C. Hexadecimal
D. Octal
E. All of the above
[单项选择]Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?（）
A. All VLANs except the default VLAN will be removed from all switches.
B. All existing switches will have the students, admin, faculty, Servers, Management,Production, and no-where VLANs.
C. The VLANs Servers, Management, Production, and no-where will replace the VLANs on SwX.
D. The VLANs Servers, Management, Production, and no-where will be removed from existing switches.
