更多"What are two benefits of using a si"的相关试题:
[单项选择] You are running OSPF between two ERX Edge Routers across an OC-12c link with HDLC encapsulation. How many designated routers are present for this link?（）
A. 0
B. 1
C. 2
D. 3
[多项选择]What are two characteristics of the OSPF process identifier?（）
A. It is needed to identify a unique instance of an OSPF database.
B. It is an optional parameter only necessary if multiple OSPF processes are used.
C. It is locally significant.
D. It is globally insignificant
E. All routers in the same OSPF area must have the same process ID to exchange routing information.
[单项选择]What OSPF command, when configured, will include all interfaces into area 0?（）
A. network 0.0.0.0 255.255.255.255 area 0
B. network 0.0.0.0 0.0.0.0 area 0
C. network 255.255.255.255 0.0.0.0 area 0
D. network all-interfaces area 0
[多项选择]The maximum number of routers per OSPF area typically depends on which three factors?（）
A. the kind of OSPF areas being implemented
B. the number of external LSAs in the network
C. the number of DRs and BDRs in the areas
D. the number of virtual links in the areas
E. how well the areas can be summarized
F. the use of LSA filters
[多项选择]To make OSPF area 4 totally stubby, the following command was issued on the ABR in router configuration mode: area 4 stub.Which two things need to be done to finish making area 4 a totally stubby area?（）
A. Apply the area 4 stub command to all routers in the area
B. On the ABR, use the area 4 stub command with the no - summary keyword
C. On the ABR, specify a default cost for the area with the area default - cost command
D. On the ABR, use the default - information originate command to inject a default route into area 4
E. Use the auto - cost command on each router in the area to automatically determine the cost to other OSPF areas
[单项选择]Which OSPF area type allows for the flooding of a Type 7 LSA?（）
A. stub
B. transit
C. border
D. not-so-stubby
[单项选择]Which of the following is true about an OSPF area border router (ABR)?（）
A. The ABR must have multiple interfaces connected to the backbone areA
B. An ABR is a router with two interfaces, each connected to a different nonbackbone areA
C. The only requirement to be considered an ABR is at least one interface connected to the backbone areA
D. An ABR must have at least one interface in the backbone area plus at least one other interface in a nonbackbone areA
[单项选择] Router R1 sits inside OSPF area 1. Router R2 redistributes an E1 route into OSPF for prefix 2.2.2.0/24, with external metric 20. Router R22 redistributes an E2 route for the same prefix/length, external metric 10. Under what conditions will R1 choose as it s best route the route through R22?（）
A. R1 will always choose the route through R22.
B. As long as R1's best internal OSPF cost to reach R22 is less than 10.
C. As long as R1's best internal OSPF cost to reach R22 is less than 20.
D. R1 will never choo se the route through R22 if the E1 route through R2 is available.
[多项选择]What are two considerations to using IP Multicast delivery? （）
A. no congestion avoidance
B. not for bandwidth intensive applications
C. no guaranteed delivery mechanism
D. source sends multiple data streams out each interface
[多项选择]What are two important considerations when using 2- or 4-channel 15216 OADMs?（） (Choose two.)
A. All "Add" channels require uniform power levels.
B. The flexibility of wavelengths per OADM is limited.
C. It is easier to balance "Pass-Through" and "Add" channels.
D. There is lower pass-through loss using multi-channel OADMs.
E. You can extract a single channel without dropping other channels.
[多项选择]What are two requirements when using Packet Flow Acceleration? （）(Choose two.)
A. Traffic needs be compressed.
B. Quality of service must be enabled.
C. A service tunnel must exist in at least one direction.
D. PFA must be enabled on the client-side WX device.
[多项选择]What are two benefits of using VTP in a switching environment?（）
A. It allows switches to read frame tags.
B. It allows ports to be assigned to VLANs automatically.
C. It maintains VLAN consistency across a switched network.
D. It allows frames from multiple VLANs to use a single interface.
E. It allows VLAN information to be automatically propagated throughout the switching environment.
[多项选择]What are two benefits of using NAT?（）
A. NAT protects network security because privat enetworks are not advertised.
B. NAT accelerates the routing process because no modifications are made on the packets.
C. Dynamic NAT facilitates connections from the outside of the network.
D. NAT facilitates end-to-end communication when IPsec is enable.
E. NAT eliminates the need to re-address all host that require extemal access.
F. NAT conserves addresses through host MAC-level multiplexing.
