更多"Which additional configuration step"的相关试题:
[单项选择]Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled（）。
A. Set the SSID value in the client software to public.
B. Configure open authentication on the AP and the client.
C. Set the SSID value on the client to the SSID configured on the AP.
D. Configure MAC address filtering to permit the client to connect to the AP.
[单项选择]Which additional configuration must be completed when setting up role restrictions using certificates? （）
A. Set up a certificate authentication server.
B. Configure the authentication realm to remember certificate information.
C. Configure the authentication realm to use a certificate server for authentication.
D. Configure a role mapping rule requiring certification information to map user to role.
[单项选择]Which step should normally be taken FIRST by those who have boarded a liferaft in an emergency?（）
A. Ration food and water supplies
B. Take anti-seasickness pills，if available
C. Determine position and closest point of land
D. Check pyrotechnic supplies
[单项选择]Which step is NOT generally taken when gas-freeing a tank?（）.
A. Washing the tank interior with sea water
B. Application of degreasing solvents
C. Removal of corrosion products and sludge
D. Fresh air ventilation
[单项选择]Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?（）
A. Set the SSID value in the client software to public.
B. Configure open authentication on the AP and the client.
C. Set the SSID value on the client to the SSID configured on the AP
D. Configure MAC address filtering to permit the client to connect to the AP
[单项选择]Which step should be taken，if possible，when the vessel must be abandoned because of a distress situation（）.
A. Alert the Coast Guard by using the survival craft's portable INMARSAT unit
B. Program the SART and EPIRB to transmit the vessel's location and situation
C. Place the SART and EPIRB in the“ON”position and secure them to the survival craft
D. No additional steps are needed as the SART and EPIRB will both automatically float free and operate properly
[多项选择]CIFS acceleration is not working. Which three steps should you use to troubleshoot the problem? （）(Choose three.)
A. Verify that HTTP acceleration is enabled.
B. Verify that TCP Acceleration (AFP) is enabled.
C. Verify that the CIFS application definition is defined correctly.
D. Verify that SMB signing is not required on the clients and domain controllers.
E. Verify that CIFS acceleration is enabled on both the server and client-side WX devices.
[单项选择]Which of the following is not a factor which can interfere with the pulse of sound and cause a variation the depth reading?（）
A. salinity
B. temperature
C. the hydrostatic pressure
D. Vessel’s speed
[多项选择]Which three are necessary for antispam to function properly on a branch SRX Series device? （）(Choose three.)
A. an antispam license
B. DNS servers configured on the SRX Series device
C. SMTP services on SRX
D. a UTM profile with an antispam configuration in the appropriate security policy
E. antivirus (full or express)
[单项选择]Which commands is necessary to permit SSH or Telnet access to a cisco switch that is otherwise configured for these vty line protocols?（）
A. transport type all
B. transport output all
C. transport preferred all
D. transport input all
[单项选择]Which condition is necessary for a substance to burn?（）
A. The temperature of the substance must be equal to or above its fire point
B. The air must contain oxygen in sufficient quantity
C. The mixture of vapors with air must be within the explosive range
D. All of the above
[单项选择]Which of these assumptions is necessary to use in system balance? （）
A. The sensitivity is the same for the MS and the BTS.
B. The path loss is the same for the MS and the BTS.
C. The feeder loss is the same for the MS and the BTS.
D. The antenna gain is the same for the MS and the BTS.
E. The combiner loss is the same for the MS and the BTS.
[单项选择]Which of the following is not necessary to consider when surveying a potential site? （）
A. Space for antennas
B. Frequency allocation
C. Electrical power availability
D. Permission/Contract with owner
E. Availability of PCM link to the BSC
[多项选择]Which of the following steps are necessary in order to add a new VLAN to a switched network?（）
A. Create the VLAN.
B. Name the VLAN.
C. Configure an IP address for the VLAN.
D. Add the desired ports to the new VLAN.
E. Add the VLAN to the VTP domain.
