更多"The Testking network is implementin"的相关试题:
[单项选择] You are the administrator of the Testking network and you have forgotten the password to one of your routers. After completing the password recovery procedure the router returned to its normal operation. The config-register was set back to the initial default value. What is this value?（）
A. 0x2112
B. 0x2104
C. 0x2102
D. 0x2142
E. 0x2100
[多项选择] The Testking Network consists of the following 5 IP networks: NETWORK 1: 192.168.10.0/26 NETWORK 2: 192.168.10.64/27 NETWORK 3: 192.168.10.96/27 NETWORK 4: 192.168.10.128/30 NETWORK 5: 192.168.10.132/30 Which of the following routing protocols will support this IP addressing scheme?（）
A. RIP version 1
B. RIP version 2
C. IGRP
D. EIGRP
E. OSPF
F. BGP
[单项选择] The Testking network is utilizing RIP as the IP routing protocol. Router TK1 learns how to reach the same destination via 6 different paths. All paths have the same metric and administrative distance. With all routers using the default operation,which of the paths will be chosen to reach the destination?（）
A. Only the first two paths that are learned.
B. Four of the paths.
C. All six routes in a routed robin fashion.
D. The oldest two paths in the routing table.
E. The first path learned to the destination network.
[多项选择] A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）
A. The switch that will share the VLAN information must be in the VTP Server mode.
B. The switches must be in the same VTP domain.
C. The switch that will share the VLAN information must be configured as the root bridge.
D. The switches must be configured to use the same VTP version.
E. The switches must be configured to use the same STP version.
F. The switches must be configured to use the same type of ID tagging.
G. The switches must be connected over VLAN trunks.
[单项选择]The Testking network has been configured with OSPF as the routing protocol.What is the default administrative distance of the OSPF routing protocol?（）
A. 90
B. 100
C. 110
D. 120
E. 130
F. 170
G. 200
[单项选择]The TestKing network was assigned the Class C network 199.166.131.0 from the ISP. If the administrator at TestKing were to subnet this class C network using the 255.255.255.224 subnet mask, how may hosts will they be able to support on each subnet?（）
A. 14
B. 16
C. 30
D. 32
E. 62
F. 64
[单项选择]The TestKing network is subnetted using 29 bits for the subnet mask. Which wild card mask should be used to configure an extended access list to permit or deny access to an entire subnetwork?（）
A. 255.255.255.224
B. 255.255.255.248
C. 0.0.0.224
D. 0.0.0.8
E. 0.0.0.7
F. 0.0.0.3
[单项选择]All WAN links is side the TestKing.com network use PPP with for authentication security. Which command will display the CHAP authentication process as it occurs between two routers in the network?（）
A. show CHAP authentication
B. show interface serial 0
C. debug PPP authentication
D. debug CHAP authentication
E. show PPP authentication CHAP
[单项选择] You are the network administrator for TestKing Oil. The network consists of three Active Directory domains in a single forest. All domain controllers run Windows Server 2003. TestKing Oil enters into a business partnership with Oil Importers. The Oil Importers network consists of four Active Directory domains in a single forest. To enable the two companies to share resources, a two-way forest trust relationship with selective authentication is created. Now you need to ensure that the research data of TestKing Oil will remain inaccessible to all users in Oil Importers. First, you create a local group named No Oil. Then, you assign the Deny - Full Control permission to No Oil. What should you do next?（）
A. Add the Domain Guests group from each of the four domains of Oil Importers to No Oil.
B. Add the Other Organization group to No Oil.
C. Add the Users group from each of the four domains of Oil Importers to No Oil.
D. Add the Proxy group to No Oil.
[单项选择] You are the network administrator for TestKing. All servers run Windows 2003. All client computers run Windows XP Professional. You log on to a server named Testking15 by using the local Administrator account. You start the installation of a new server application. After you start the installation, you return to your office, which is located in another building. You need to find out the status of the installation that is in progress on Testking15. What should you do?（）
A. Select the Remember server connections option in Terminal Service Manager.
B. Use Terminal Service Manager to connect to Testking15.
C. Use Remote Assistance from a client computer.
D. Use the Remote Desktop Client to connect to the console session on Testking15
[单项选择] You are the network administrator for TestKing. The network consists of a single Active Directory domain. All network servers run Windows Server 2003. Half of the client computers run Windows XP Professional, and the other half run Windows NT 4.0 Workstation. You install Terminal Services on three member servers named Testking1, Testking2, and Testking3. Each server has a single Pentium III 600-Mhz CPU with 512 MB of RAM and a single-channel EIDE disk subsystem. You place all three terminal servers in an organizational unit (OU) named Terminal Server. You link a Group Policy Object (GPO) to the Terminal Server OU. Several days after the installation, users report that the performance of all three terminal servers is unacceptably slow. You discover that each server has at least 50 active sessions at once. You need to improve the performance of all three terminal servers. You must achieve this goal by using the minimum amount of administrative effort, without upgrading any hardware. What should you do?（）
A. Log on to the console of each terminal server. In the RDP-Tcp connection properties, set the Maximum connections option to 35.
B. Edit the GPO to set the Limit number of connections policy to 35.
C. Modify all domain user accounts to set the When a session limit is reached or broken user property to End session.
D. Edit the GPO to enable the Remove Disconnected option from shutdown dialog policy
[多项选择]You are the network administrator at TestKing. You need to perform password recovery on Router TK1. What must you modify in the password recovery process?（）
A. Configuration register
B. NVRAM
C. Boot flash
D. CMOS
E. Flash
[多项选择] You are the network administrator for Testking.com. The network consists of a single Active Directory domain testking.com. All domain controllers run Windows Server 2003. Users who enter an invalid password more than twice in one day must be locked out. You need to configure domain account policy settings to enforce this rule. Which two actions should you perform?（） (Each correct answer presents part of the solution. Choose two)
A. Set the minimum password age to one day.
B. Set the maximum password age to one day.
C. Change the Enforce password history setting to three passwords remembered.
D. Change the Account lockout duration setting to 1440 minutes.
E. Change the Account lockout threshold setting to three invalid logon attempts.
F. Change the Reset account lockout counter after setting to 1440 minutes.
