[多项选择]A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which of the following can influence which o f those routes become feasible successor routes, assuming that you follow the Cisco recommended practice of not changing metric weights？（）
A. The configuration of EIGRP offset lists
B. Current link loads
C. Changing interface delay settings
D. Configu ration of variance

[单项选择] A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?（）
A. show ip eigrp topology
B. show ip eigrp topology all - links
C. show ip route eigrp
D. show ip route eigrp all - links
E. show ip eigrp topology all - learned

[单项选择]A system has three different network adapters installed. Which of the following should a technician use to get the details of all the adapters at the same time?（）
A. IPCONFIG /ALL
B. NETSTAT /A
C. NBTSTAT /ALL
D. PING LOCALHOST

[多项选择] Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result？（）
A. R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
B. R1 can send IP packets to R2, but R2 cannot send IP packets to R1
C. R2 no longer learns EIGRP routes from R1 for routes not connected to R1
D. R1 no longer replies to R2's Query messages
E. R2n o longer sends to R1 Query messages

[单项选择]The design for the museum building shows a great deal of______.
A. originality
B. orientation
C. illusion
D. invention

[单项选择]Which CLI command shows if the router has formed any IS-IS adjacencies?（）
A. show clns neighbor
B. show isis neighbor
C. show clns adjacency
D. show isis adjacency

[单项选择]He has（）four successful books.
A. wrote
B. written
C. been writing

[单项选择]ABR R1 has been configured with an area 1 stub no - summary command. Which stubby area type is area 1?（）
A. Stub
B. Totally stubby
C. NSSA
D. Totally NSSA

[单项选择]A user’s workstation currently has four connected IDE devices. Which of the following could be added to the workstation to allow more ATA devices to be added to the workstation?（）
A. Network Interface card
B. Port expansion card
C. Serial interface card
D. Modem card

[单项选择]Your company has four DNS servers that run Windows Server 2008 R2. Each server has a static IP address.You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients.What should you do？（）
A. Create a new scope for the DNS servers.
B. Create a reservation for the DHCP server.
C. Configure the 005 Name Servers scope option.
D. Configure an exclusion that contains the IP addresses of the four DNS servers.

[单项选择]our company has four DNS servers that run windows 2008. Each server has a static ip address. You need to prevent dhcp from assigning the addresses of the DNS servers to DHCP clients. What should you do?（）
A. Create a new scope for the DNS servers.
B. Create a reservation for the DHCP serve.
C. Configure the 005 name servers scope option.
D. Configure an exclusion that contains the ip addresses of the four DNS servers.

[单项选择] Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）
A. Subnet number
B. Next - hop router IP address of the route
C. Whether the route is an E1 or E2 route
D. The ro ute's tag
E. The number of router hops between the router and the subnet

[多项选择] Router R1 has the following configuration. Assuming R1's F0/0 interface has a MAC address of 0200.0011.1111, what IPv6 addresses will R1 list for interface F0/0 in the output of the show ipv6 interface brief command?（） interface f0/0 ipv6 address 2345:0:0:8::1/64
A. 2345:0:0:8::1
B. 2345:0:0:8:0:FF:FE11:1111
C. FE80::8:0:FF:FE11:1111
D. FE80:0:0:8::1

[单项选择] R1 has correctly configured EIGRP to filter routes using a route map named question. The configuration that follows shows the entire route map and related configuration. Which of the following is true regarding the filtering action on prefix 10.10.10.0/24 in this case?（） route - map question deny 10 match ip address 1 route - map question permit 20 match ip address prefix- list fred ! access - list 1 deny 10.10.10.0 0.0.0.255 ip prefix - list fred permit 10.10.10.0/23 le 25
A. It will be filtered due to the deny action in route map clause 10
B. It will be allowed because of the double negative (two deny references) in clause 10
C. It will be permitted due to matching clause 20's reference to prefix - list freD
D.   It will be filtered due to matching the implied deny all route map clause at the end of the route map

[多项选择] An engineer has typed four different single - line prefix lists in a word processor. The four answers show the four different single -lin e prefix lists. The engineer then does a copy/paste of the configuration into a router. Which of the lists could match a subnet whose prefix length is 27?（）
A. ip prefix - list fred permit 10.0.0.0/24 ge 16 le 28
B. ip prefix - list barney permit 10.0.0.0/24 le 28
C. ip prefix - list wilma permit 10.0.0.0/24 ge 25
D. ip prefix - list betty permit 10.0.0.0/24 ge 28

[单项选择] Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable OSPFv3 on interfaces F0/0 and S0/0/0. No other related configuration exists. Assuming F0/0 and S0/0/0 reach an up/up state, which of the following is true about OSPFv3 on R1 after this configuration has been pasted into R1?（） ipv6 router ospf 1 ipv6 unicast- routing interface f0/0 ipv6 address 2000 ::1/64 ipv6 ospf 1 area 1 interface s0/0/0 ipv6 address 2001::/64 eui - 64 ipv6 ospf 1 area 0
A. OSPF works on F0/0 and S0/0/0 without further configuration
B. OSPF works with the addition of one command: a no shutdown command in OSPF router configur ation modE
C. OSPF works with the addition of one command: an router - id command in OSPF router configuration modE
D. OSPFv3 needs at least two more configuration commands before it works on R1

[单项选择] Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router. Which of the following could be the link local address of R1's interface S0/0?（）
A. FEA0::200:FF:FE11:0
B. FE80::200:FF:FE11:1111
C. FE80::0213:19FF:FE7B:0:1
D. FEB0::211:11FF:FE11: 1111