更多"When IP multicast is enabled via PI"的相关试题:
[单项选择]When building an IP multicast domain using PIM which mode assumes that other routers do not want to forward multicast packets for the group?()
A. PIM - DM
B. PIM - SM
C. PIM - RP
D. CGMP
E. IGMP snooping
[多项选择]Which two are correct when configuring an IP address for a Fast Ethernet interface?()
A. set interfaces fe-0/0/0 address 10.1.1.1/24
B. set interfaces fe-0/0/0.0 family inet address 10.1.1.1/24
C. set interfaces fe-0/0/0.0 address 10.1.1.1/24
D. set interfaces fe-0/0/0 unit 0 family inet address 10.1.1.1/24
[单项选择]Which term represents the mode that is used when the router stores log messages in RAMmemory? ()
A. syslog logging
B. terminal logging
C. buffered logging
D. console logging
[单项选择]Which switching mode provides the highest level of integrity and error-free transport, rather then maximizing speed?()
A. 802.1q forwarding
B. VTP transparent mode
C. Cut-through
D. Store-and-forward
E. Fragment-free
F. Frame-filtering
[单项选择]Which operational mode command can be used to synchronize the local system with an NTP server?()
A. set ntp time 64.32.129.3
B. set clock ntp 64.32.129.3
C. set time 64.32.129.3
D. set date ntp 64.32.129.3
[单项选择]Which CLI mode allows you to make configuration changes?()
A. enable mode
B. configuration mode
C. operational mode
D. active mode
[单项选择]Which timing mode is appropriate for a SONET NE that is adjacent to a SONET NE using BITS-1 timing source?()
A. DUS
B. line timing
C. loop timing
D. internal timing
E. through timing
[单项选择]Which timing mode is most appropriate for an ONS 15454 that has lost its BITS-1 and optical references?()
A. line timing
B. loop timing
C. internal timing
D. through timing
E. external timing
[单项选择]Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?()
A. client
B. dynamic
C. server
D. static
E. transparent
[单项选择]Which multicast mode does Auto-RP require?()
A. Link-mode
B. Dense mode
C. Sparse mode
D. Sparse-dense mode
[单项选择]Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?()
A. Transparent
B. Server
C. Auto
D. Client
E. User
[多项选择]When a DHCP server is configured, which two IP addresses should never be assignable to hosts?()
A. network or subnetwork IP address
B. broadcast address on the network
C. IP address leased to the LAN
D. IP address used by the interfaces
E. manually assigned address to the clients
F. designated IP address to the DHCP server