[多项选择]Which two statements are true about IS -IS routing?（）
A. Based on the default timers, OSPF d etects a failure faster than IS - IS does.
B. OSPF default timers permit more tuning than IS - IS does.
C. IS - IS is more efficient than OSPF in the use of CPU resources.
D. OSPF is more scalable than IS - IS because of its ability to identify normal, stub, an d NSSA areas.
E. IS - IS and OSPF are both Open Standard, link - state routing protocols which support VLSM.

[多项选择]Which two statements are correct about routing tables in JUNOS?（）
A. There are separate tables for IPv4 and IPv6 called inet.0 and inet6.0 respectively.
B. They only contain the best possible route to each destination.
C. All running protocols can populate the routing tables at the same time.
D. Routes with the highest preference value are placed as active routes in the routing table.

[多项选择]Which two statements are true regarding routing tables?（）
A. The routing table is populated by the forwarding table.
B. Devices running the Junos OS can accommodate multiple routing tables.
C. Information learned from routing protocols is stored in the routing table.
D. The primary routing table for IPv4 unicast routes is inet.4.

[多项选择]Which two statements are true regarding routing policy processing?（）
A. The Junos OS verifies the match criteria of each policy in order and performs the associated action when a match occurs.
B. Policies are evaluated from right to left as displayed in the Junos OS configuration file.
C. Polices are evaluated based on the order in which they are applied to a routing protocol.
D. Policy processing stops once the last statement in the policy is evaluated.

[多项选择]Which two statements about the IS -IS routing protocol are true?（）
A. IS - IS is capable of supporting IPv4 and IPv6.
B. IS - IS is only capable of supporting IPv4 and CLNS.
C. IS - IS routers use ES - IS hellos (ESH) to establish and to maintain neighbor relationships.
D. IS - IS routers run the Bellman - Ford algorithm against their LSDBs to pick the best paths.
E. Level 1 routers learn about paths within the area of which they are a part.
F. Level 2 routers learn about paths both within areas and between areas.

[多项选择]Which two statements describe the default routing policy for BGP?（）
A. Advertise only locally originated routes.
B. Accept all BGP routes and import into inet.0.
C. Advertise all active BGP routes.
D. Advertise only EBGP routes.

[多项选择]Which three statements are true of dynamic routing protocols?（）
A. They are scalable.
B. They are Dijkstra based.
C. They share network layer reach ability information among neighbors.
D. They automate next hopdecisions.
E. They are tolerant of configuration errors.

[多项选择]Which three statements about the EIGRP routing protocol are true?（）
A. EIGRP supports five generic packet types, including hello, database description (DBD), link state request (LSR), link - state update (LSU), and LSAck.
B. EIGRP sends periodic hello packets to the multicast IP address 224.0.0.10.
C. EIGRP will not form a neighbor relationship with another peer when their K values are mismatched.
D. EIGRP sends periodic hello packets to the multicast IP address 224.0.0.9.
E. E IGRP will form a neighbor relationship with another peer even when their K values are mismatched.
F. EIGRP supports five generic packet types, including hello, update, query, reply, and ACK packets.

[单项选择]Which of these statements is true of routing protocols in a hub-and-spoke IPsec VPN topology?（）
A. EIGRP can summarize per interface.
B. OSPF router databases remain independent.
C. When they are configured with stubs, EIGRP regularly floods the topology.
D. OSPF topology decisions are made independent of hierarchy or area.

[多项选择]Which statements describe the routing protocol OSPF?（）
A. It supports VLSM.
B. It is used to route between autonomous systems.
C. It confines network instability to one area of the network.
D. It increases routing overhead on the network.
E. It allows extensive control of routing updates.
F. It is simpler to configure than RIP v2.

[多项选择]Which two statements are true about precedence values in policy?（） (Choose two.)
A. 1 is the default precedence.
B. A lower number is preferred.
C. A higher number is preferred.
D. 100 is the default precedence.

[多项选择]Which two statements are true about the duplexing of the backups taken by RMAN? （）(Choose two.)
A. It's only supported for the backups performed on the tape
B. It is not supported for backup operations that produce image copies
C. Duplex backups need a parallelism for the device to be equal to number of copies
D. Duplex backups can be performed to either disk or tape, but cannot be performed on tape and disk simultaneously

[多项选择]Which two statements are true about static routes in the Junos OS?（）
A. Static routes are defined at the [edit routing-instances] hierarchy.
B. Static routes must have a next hop defined.
C. Static routes remain in the routing table until you remove them or until they become inactive.
D. Static routes are learned by neighboring devices and added to their routing tables.

[多项选择]Which two statements are true about the forwarding table?（）
A. The forwarding table lists each source protocol and preference for each destination.
B. The forwarding table contains only active routes.
C. The forwarding table is used to process transit packets.
D. The forwarding table is stored in compact flash

[多项选择]Which two statements are true about firewall filter configurations?（）
A. Multiple action modifiers can be included in the same term.
B. Only a single action modifier can be included in the same term.
C. The default term within a firewall filter uses the discard action.
D. The default term within a firewall filter uses the reject action.