[单项选择] Examine the following excerpt from the show ip ospf database asbr -summary command on router R1 (RID 1.1.1.1). Which answer can be verified as definitely true based on this output?（） LS Type: Summary Links (AS Boundary Router) Link State ID: 9.9.9.9 (AS Boundary Router address) Advertising Router: 3.3.3.3 LS Seq Number: 8000000D Checksum: 0xE43A Length: 28 Network Mask: /0 TOS: 0 Metric: 100
A. The output describes the contents of a Type 5 LSA
B. 3.3.3.3 identifies a ro uter as being the router performing redistribution
C. R1's metric for its best route to reach the router with RID 9.9.9.9 is 100
D. The router with RID 3.3.3.3's metric for its best route to reach the router with RID 9.9.9.9 is 100

[单项选择] Examine the following excerpt from the show ip eigrp topology 10.2.2.0/24 command on router R1.Which answer can be verified as definitely true based on this output?（） External data: Originating router is 10.1.1.1 AS number of route is 1 External protocol is OSPF, external metric is 64 Administrator tag is 0 (0x00000000)
A. R1 is the router that redistributed the route
B. R1's metric to reach subnet 10.2.2.0/24 is 64
C. The route was redistributed on a router that has a router ospf 1 command configured
D. R1 is redistributing a route to prefix 1 0.2.2.0/24 into OSPF

[单项选择]Who will read the following excerpt from a pamphlet
A. Travellers.
B. Baby-sitters.
C. Insurance agents.
D. Traffic police.

[单项选择]The excerpt from Chapter 10 of Sons and Lovers by D. H. Lawrence ends with the conflict between Paul and his mother. The cause of the conflict was probably Paul and his mother's opposing views towards
A. life.
B. art.
C. culture.
D. politics.

[单项选择] The following output, taken from a show ip bgp command on Router R1, lists two neighbors. In what BGP neighbor state is neighbor 1.1.1.1?（） Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 1.1.1.1 4 1 60 61 26 0 0 00:45:01 0 2.2.2.2 4 3 153 159 26 0 0 00:38:13 1
A. Idle
B. Opensent
C. Active
D. Established

[单项选择]This passage is an excerpt from ___________.
A. a book
B. a paper
C. a speech
D. a report

[多项选择] The following output was taken from the show ip bgp command on Router R2. In this case, which of the following commands are most likely to already be configured on R2?（） BGP router identifier 11.11.11.11, local AS number 11 ... Neighbor V AS Ms gRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 1.1.1.1 4 1 87 87 0 0 0 00:00:06 Idle (Admin) 2.2.2.2 4 3 173 183 41 0 0 00:58:47
A. router bgp 11
B. neighbor 1.1.1.1 remote- as 11
C. neighbor 2.2.2.2 prefix - limit 1
D. neighbor 1.1.1.1 shutdown

[单项选择] Examine the following values of the initialization parameters in the database having the SID ORCL: BACKGROUND_DUMP_DEST=/u01/app/oracle/product/11.1.0/db_1/bdump USER_DUMP_DEST=/u01/app/oracle/product/11.1.0/db_1/udump CORE_DUMP_DEST=/u01/app/oracle/product/11.1.0/db_1/cdump DIAGNOSTIC_DEST= The environment variables have the following value: ORACLE_BASE=/u01/app/oracle ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1 What is the location of the Automatic Diagnostic Repository (ADR) home?（）
A. /u01/app/oracle/product/11.1.0/db_1
B. /u01/app/oracle
C. $ORACLE_HOME/bdump
D. $ORACLE_HOME/log

[多项选择] Examine the following parameters for a database instance: MEMORY_MAX_TARGET=0 MEMORY_TARGET=0 SGA_TARGET=0 PGA_AGGREGATE_TARGET=500m Which three initialization parameters are not controlled by Automatic Shared Memory Management (ASMM)?（）
A. LOG_BUFFER
B. SORT_AREA_SIZE
C. JAVA_POOL_SIZE
D. STREAMS_POOL_SIZE
E. DB_16K_CACHE_SZIE
F. DB_KEEP_CACHE_SIZE

[多项选择] Examine the following command used to perform incremental level 0 backup: RMAN> BACKUP INCREMENTAL LEVEL 0 DATABASE; To enable the block change tracking, after the incremental level 0 backup you issued the following command: SQL> ALTER DATABASE ENABLE BLOCK CHANGE TRACKING USING FILE '/mydir/ rman_change_track.f'; To perform incremental level 1 cumulative backup, you issued the following command: RMAN> BACKUP INCREMENTAL LEVEL 1 CUMULATIVE DATABASE; Which two statements are true in the above situation?（）
A. The block change tracking data will be used only from the next incremental 0 backup.
B. The incremental backup will use change tracking data for accomplishing the backup.
C. The incremental backup will not use change tracking data for accomplishing the backup.
D. The block track file will scan all the blocks and create bitmap for all the blocks backed up in the level 0 backup.

[单项选择] Examine the following command: ALTER DISKGROUP data MOUNT FORCE; In which scenario can you use the above command to mount the disk group? （）
A. when ASM disk goes offline
B. when one or more ASM files are dropped
C. when some disks in a disk group are offline
D. when some disks in a failure group for a disk group are rebalancing

[单项选择]Which line from the output of the show ip interface command indicates a layer 1 problem?（）
A. Serial0/1 is up, line protocol is down
B. Serial0/1 is down, line protocol is down
C. Serial0/1 is up, line protocol is up
D. Serial0/1 is administratively down, line protocol is down

[多项选择]What can be determined from the line of show ip route output shown in the exhibit?（）
A. The next routing update can be expected in 35 seconds.
B. The IP address 10.10.10.6 is configured on S0/1.
C. The IP address 10.10.10.8 is configured on S0/1.
D. This route is using the default administrative distance.
E. The 10.10.10.8 network is two hops away from this router.

[单项选择] Examine the following query output: You issue the following command to import tables into the hr schema: $ > impdp hr/hr directory = dumpdir dumpfile = hr_new.dmp schemas=hr TRANSFORM=DISABLE_ARCHIVE_LOGGING: Y Which statement is true?（）
A. All database operations performed by the impdp command are logged.
B. Only CREATE INDEX and CREATE TABLE statements generated by the import are logged.
C. Only CREATE TABLE and ALTER TABLE statements generated by the import are logged.
D. None of the operations against the master table used by Oracle Data Pump to coordinate its activities are logged.

[单项选择] Examine the following command; ALTER SYSTEM SET enable_ddl_logging = TRUE; Which statement is true?（）
A. Only the data definition language (DDL) commands that resulted in errors are logged in the alert log file.
B. All DDL commands are logged in the alert log file.
C. All DDL commands are logged in a different log file that contains DDL statements and their execution dates.
D. Only DDL commands that resulted in the creation of new segments are logged.
E. All DDL commands are logged in XML format in the alert directory under the Automatic Diagnostic Repository (ADR) home.

[单项选择] Examine the following RMAN command: RMAN> CONFIGURE ENCRYPTION FOR DATABASE ON; RMAN> BACKUP DATABASE PLUS ARCHIVELOG; Which prerequisite must be met before accomplishing the backup?（）
A. Provide a password for the encryption
B. Set up an Oracle wallet for the encryption
C. No setup is required as it is a default encryption method
D. Both Oracle wallet and password must be set up for the encryption

[多项选择]Examine the following impdp command to import a database over the network from a pre-12c Oracledatabase (source): Which three are prerequisites for successful execution of the command?（）
A. The import operation must be performed by a user on the target database with the DATAPUMP_IMP_FULL_DATABASE role, and the database link must connect to a user on the source database with the DATAPUMP_EXD_FULL_DATABASE role.
B. All the user-defined tablespaces must be in read-only mode on the source database.
C. The export dump file must be created before starting the import on the target database.
D. The source and target database must be running on the same platform with the same endianness.
E. The path of data files on the target database must be the same as that on the source database.
F. The impdp operation must be performed by the same user that performed the expdp operation.

[单项选择] Examine the following scenario: - Database is running in ARCHIVELOG mode. - Complete consistent backup is taken every Sunday. - On Tuesday the instance terminates abnormally because the disk on which control files are located gets corrupted - The disk having active online redo log files is also corrupted. - The hardware is repaired and the paths for online redo log files and control files are still valid. Which option would you use to perform the recovery of database till the point of failure?（）
A. Restore the latest whole backup, perform complete recovery, and open the database normally
B. Restore the latest whole backup, perform incomplete recovery, and open the database with the RESETLOGS option.
C. Restore the latest backups control file, perform complete recovery, and open the database with the RESETLOGS option.
D. Restore the latest backup control file, perform incomplete recovery using backup control file, and open the database with the RESETLOG option.

[多项选择] Examine the following command that is used to duplicate a database on the same host: RMAN> RUN { ALLOCATE AUXILIARY CHANNEL, aux 1 DEVICE TYPE DISK; DUPLICATE TARGET DATABASE TO auxdb SKIP READONLY; / } Which two statements describe the effect after the database is duplicated successfully? （）(Choose two)
A. The data files of the read-only tablespaces in the target database are not duplicated
B. The read-only tablespaces in the target database are still defined in new the database
C. The read-only tablespaces in the target database are changed to online after duplication
D. The data files of the read-only tablespaces in the target database get duplicated
E. The read-only tablespaces in the target database are not defined in the new database