[单项选择] Router R1 use s MAC address 1111.1111.1111 for its Fa0/0 interface. An engineer sees the following configuration in the output of a show running - config command. Then, the engineer issues a show ipv6 interface brief command. What global unicast IPv6 address does this c ommand display for interface tunnel 1?（） interface loopback 1 ip address 192.168.1.1 255.255.255.255 interface tunnel 1 tunnel source loopback 1 tunnel destination 192.168.1.2 tunnel mode ipv6ip isatap ipv6 address 2000::/64 eui - 64
A. 2000::1311:11F F:FE11:1111
B. 2000::C0A5:101
C. 2000:C0A5:101::
D. 2000::5EFE:C0A5:101

更多"Router R1 use s MAC address 1111.11"的相关试题:

[单项选择]Which TCP port does LDP use for its protocol communications?（）
A. 464
B. 466
C. 644
D. 646

[单项选择]You are unable to telnet to a router at address 203.125.12.1 from a workstation with the IP address 203.125.12.23. You suspect that there is a problem with your protocol stack. Which of the following actions is most likely to confirm your diagnosis?（）
A. ping 127.0.0.0
B. ping 203.125.12.1
C. telnet 127.0.0.1
D. ping 127.0.0.1
E. tracert 203.125.12.1

查看答案

[单项选择]The router address 192.168.1.250 is the default gateway for both the Web Server 2 and Host 1. What is the correct subnet mask for this network（）。
A. 255.255.255.0
B. 255.255.255.192
C. 255.255.255.250
D. 255.255.255.252

查看答案

[单项选择]The router address 192.168.1.250 is the default gateway for both the Web Server 2 and Host 1. What is the correct subnet mask for this network?（）
A. 255.255.255.0
B. 255.255.255.192
C. 255.255.255.250
D. 255.255.255.252

查看答案

[简答题]MAC

查看答案

[多项选择] Routers R1 and R2 use HSRP so that one router will back up the other should there be a failure. Which two statements are true about the Hot Standby Router Protocol （HSRP）？（）
A. Load sharing with HSRP is achieved by creating multiple subinterfaces on the HSRP routers.
B. Routers configured for HSRP can belong to multiple groups and multiple VLANs.
C. Load sharing with HSRP is achieved by creating HSRP groups on the HSRP routers.
D. All routers configured for HSRP load balancing must be configured with the same priority.
E. Routers configured for HSRP must belong to only one group per HSRP interface.

查看答案

[单项选择]Besides its main use the noise-killing system can______.
A. make a car lighter
B. make a car quieter
C. reduce the cost of a silencer
D. improve the performance of a silencer

查看答案

[判断题]电阻R1，R2并联，已知R1＞＞R2，并联后的等值电阻近似等于R1，即R≈R1。

查看答案

[填空题]电阻R₁和R₂串联，已知R₂＝4R₁，若R₂两端电压U₂=16V，则R₁两端电压U₁＝（）。

查看答案

[多项选择] Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result？（）
A. R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
B. R1 can send IP packets to R2, but R2 cannot send IP packets to R1
C. R2 no longer learns EIGRP routes from R1 for routes not connected to R1
D. R1 no longer replies to R2's Query messages
E. R2n o longer sends to R1 Query messages

查看答案

[单项选择]如下两个关系R1和R2，它们进行何种运算后得到R3R1

查看答案

[判断题]执行N10 R1=5；N20 R1=R1+5；后参数R1的值为仍为5（SIEMENS系统）。

查看答案

[判断题]已知R1=5Ω，R2=10Ω，把R1、R2串联起来，并在其两端加15V的电压，此时R1所消耗的功率是5W。

查看答案

[单项选择]已知R1=8，R0=9，执行指令MOV R0，R1，LSR#3后，R0的值为（）。
A. 1
B. 8
C. 0x10
D. 0x80

查看答案

[判断题]表达式"R1=R2+R3*SIN（R4）"的运算次序依次为SIN（R4），R3*SIN（R4），R2+R3*SIN（R4）（SIEMENS系统）。

查看答案

我来回答:

提交