更多"What is the minimum amount of memor"的相关试题:
[单项选择]What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX 6.1?（）
A. 128M
B. 256M
C. 512M
D. 1024M
[单项选择]Which of the following is the MINIMUM amount of hard drives needed for a RAID 5 array?（）
A. 2
B. 3
C. 4
D. 5
[单项选择]What is required for the minimum configuration of the TS7650 ProtecTIER Appliance console? （）
A. 50 MB of available disk space and 128 MB of RAM
B. 100 MB of available disk space and 256 MB of RAM
C. 200 MB of available disk space and 512 MB of RAM
D. 300 MB of available disk space and 512 MB of RAM
[单项选择]What is the minimum number of CECs required to avoid single points of failure on a Power 570 server?（）
A. 1
B. 2
C. 3
D. 4
[单项选择]What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX 6.1？（）
A. 128M
B. 256M
C. 512M
D. 1024M
[单项选择]When an amount of memory is requested that is less than the size of a page, but a full page is allocated, the resulting. waste of memory is called( ).
A. external fragmentation
B. internal fragmentation
C. inaccessible page faults
D. inaccessible garbage
[单项选择]What is the MINIMUM Windows Experience Index recommended for using Aero enhancements in Windows 7?（）
A. 2.0
B. 3.0
C. 4.0
D. 5.0
[单项选择]What amount of cell overlap ensures smooth roaming for wireless endpoints?（）
A. 5；10%
B. 10；15%
C. 15；20%
D. 20；25%
[单项选择]The amount of sleep required may ______ .
[单项选择]What is required to enable fragmentation of large FTP packets when voice quality on the network is affected by FTP transfers?（）
A. Configure TCP header compression on interface
B. Configure MPL on the Frame Relay interfaces
C. Configure FRF 12 fragmentation on the Frame Relay interfaces
D. Fragmentation is not supported with service internetworking
[多项选择]What components are required to directly connect two PCs so they are able to participate in a simple peer-to-per network?（）
A. Straight-through cable
B. Compatible network interfaces
C. Networking protocol
D. Hub
E. Crossover cable
F. router
[单项选择]What are the steps required to perform a Preservation install on a server?（）
A. Shutdown the server and boot it into SMS.Select SMS menu option OS Upgrade, Preservation install for the install type, and allow upgrade to run.
B. Shut down the server and perform a network boot from a local NIM server. Select Preservation install for the install type, and allow upgrade to run.
C. Shutdown the server and boot it into SMS.Select SMS menu option OS Upgrade, Preservation install for the install type, and allow for upgrade to run.
D. Re-boot the server and NFS mount the bos images from a local NIM server. Run smit install. Select Preservation install for the install type, and allow upgrade to run.
[单项选择]In an XIV Storage System, what is the minimum number of modules required to support iSCSI connectivity?（）
A. 6 modules
B. 9 modules
C. 11 modules
D. 15 modules
[单项选择]What is required to enable the use of metrics larger then 63 for traffic engineering in IS-IS?（）
A. No action required, wide metrics are used by default in IS-IS.
B. Enable wide-metrics-only under protocols IS-IS.
C. Enable traffic-engineering under protocols IS-IS.
D. Disable TLVs 2 and 128 which carry the 6-bit metrics (0-63).
[单项选择]What is the major characteristic of man's memory capacity according to the author
A. It can be expanded by language.
B. It may keep all the information in the past.
C. It can remember all the combined words.
D. It may change what bas been stored in it.
[单项选择]What is the type and scope of the LSA required to support traffic engineering in an OSPFenvironment?（）
A. Type 9, AS scope
B. Type 10, AS scope
C. Type 10, Area scope
D. Type 9, Area scope
