更多"After updating the system, the syst"的相关试题:
[单项选择] After updating serverB's network configurations, anadministrator notices that serverA, which resides in a different subnet, is unable to communicate with serverB via ssh or telnet. As ping's to the server fail, the administrator logs onto serverB via a console and finds an available interface en0 in the 'up' state. From the console connection, en0 can communicate with other servers in the same subnet. What is the most likely cause of the problem?（）
A. en0 has no associated ip address.
B. serverB is missing its default route.
C. serverB and serverA cannot connect due to a firewall.
D. en0 has been set up to block traffic from servers that are in different subnets.
[单项选择]Which of the following allows network administrators to easily apply common services and employ features across Cisco switches, routers, and access points with an intuitive GUI?（）
A. Cisco IPS
B. Cisco Network Assistant
C. Cisco VAM2+
D. Cisco SDM
[单项选择]Which of the following tools would an administrator BEST use to trace a network cable?（）
A. Toner
B. Cable tester
C. Butt set
D. Multimeter
[单项选择]Which of the following would allow an administrator to incorporate a new Windows service pack into an installation when the media does not include the service pack?（）
A. Templates
B. RIS
C. Ghost
D. Slipstreaming
[多项选择]Which of the following devices can an administrator use to segment their LAN?（）
A. Hubs
B. Repeaters
C. Switches
D. Bridges
E. Routers
F. Media Converters
G. All of the above
[单项选择] After updating serverB’s network configurations， an administrator notices that serverA， which resides in a different subnet， is unable to communicate with serverB via ssh or telnet. As ping’s to the server fail， the administrator logs onto serverB via a console and finds an available interface en0 in the ’up’ state. From the console connection， en0 can communicate with other servers in the same subnet. What is the most likely cause of the problem？（）
A. en0 has no associated ip address.
B. serverB is missing its default route.
C. serverB and serverA cannot connect due to a firewall.
D. en0 has been set up to block traffic from servers that are in different subnets.
[单项选择]A Windows XP system locks up after the GUI starts to load. The system will start in Safe Mode. TheEvent Viewer reports that a driver failed to load. Which of the following methods would help diagnose the problem? （）
A. Enable boot logging. In Safe Mode, read the ntbtlog.txt file.
B. In Safe Mode, run the sigverif utility.
C. Restart the system from the OEM recovery CD; do a full restore.
D. In Safe Mode, run the driverquery utility.
[单项选择] After mirroring rootvg, a system administrator wantsto validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order?（）
A. Run a bosboot -a command
B. Mirror the hd5 on the two disks
C. Set up another service mode bootlist
D. Check the disks using a lsvg -p rootvg command
[单项选择]After installing the base operating system and the Server bundle, a system administrator decides to remove several printer definitions that the system users will not need. Which of the following procedures is the best way for a system administrator to remove the extra printer definitions?（）
A. Select the SMIT option to remove software products
B. Reinstall the desired filesets using the "Force Overwrite" option
C. Delete the unnecessary entries from the /usr/lpp/printers directory
D. Use the ODM edit (odem) utility to revmoe the definition from the system's ODM database
[单项选择]After creating backups of critical system and user data, which of the following is the BEST location to store the backups?（）
A. In the supply closet so anyone can access them if needed
B. Near the server for easy access to restore files
C. Locked in a cabinet in the IT Manager’s office
D. At a secure off-site storage facility
[单项选择]After installing the Windows operating system, Device Manager shows a number of devices with a yellow question mark next to them. Which of the following is the MOST likely reason?（）
A. The latest service pack needs to be installed.
B. The created hard drive partition is not large enough.
C. The motherboard chipset driver needs to be installed.
D. The processor does not support the Windows OS.
[单项选择]After a successful recovery, the system administrator wishes to remove the fileset bos.net.tcp.server and all dependent software. After running an lslpp command, it is verified that the fileset is in the BROKEN state. What is the correct method for deinstallation?（）
A. Use installp -u command with -g to remove the fileset and all dependent software.
B. Use installp -c command to commit fileset; use installp command with -g to remove the fileset and all dependent software.
C. Use installp -C command to perform cleanup of fileset; use install command with -g to remove the fileset and all dependent software.
D. Use installp -a command to apply fileset; use installp command with -g to remove the fileset and all dependent software.
[单项选择]After a successful system recovery, it is determined that the server will not support printing so the system administrator has decided to remove the bos.rte.printers fileset and all of its dependents. Which of the following is the correct method to accomplish this task?（）
A. Use fastpath "smitty rmvprt"
B. Installp -u -g bos.rte.printers
C. Use fastpath "smitty maintain_software"; choose "Remove Installed Software";fill in values for bos.rte.printers
D. Remove of the bos.rte.printers fileset is not permitted
[单项选择]The system hangs at boot time after starting NFS services.What is the most likely cause?（）
A. The action parameter of rcnfs in /etc/inittab is 'off' and the script called is not exiting.
B. The action parameter of rcnfs in /etc/inittab is 'wait' and the script called is not exiting.
C. The action parameter of rcnfs in /etc/inittab is 'once' and the script called is not exiting.
D. The action parameter of rcnfs in /etc/inittab is 'respawn' and the script called is not exiting.
[单项选择]After POST, the error message ‘Invalid system disk. Replace and press any key’ appears. Which of the following is MOST likely the cause?（）
A. There is a non-bootable CD in the CD-ROM drive.
B. There is a non-bootable DVD in the DVD-ROM drive.
C. There is a non-bootable Blu-Ray in the Blu-Ray drive.
D. There is a non-bootable floppy in the floppy drive.
[单项选择]The Company network administrator needs to enable VTP pruning within the Company network. What action should a network administrator take to enable VTP pruning on an entire management domain？（）
A. Enable VTP pruning on any switch in the management domain
B. Enable VTP pruning on any client switch in the domain
C. Enable VTP pruning on a VTP server in the management domain
D. Enable VTP pruning on every switch in the domain
E. None of the other alternatives apply
[单项选择] You are a network administrator for ExamSheet.net. You plan to configure your computer to use Windows 98, Windows 2000 Professional and indows NT Workstation 4.0. You also plan to configure a data drive that can be accessed by all operating systems on your computer. Your computer has one 20 GB hard disk. You want to configure your computer as shown in the exhibit. What should do? （）
A. Create the boot drive on drive C and format as a FAT16 partition.
B. Create the boot drive on drive C and format as a NTFS partition.
C. Configure the boot drive as a basic volume and format the volume as FAT32.
D. Configure the boot drive as a dynamic volume and format the volume as a FAT16 partition.
E. Configure the boot drive as a dynamic volume and format the volume as a FAT32 partition.
