[单项选择]An LPAR has hung during a reboot, reporting a 0552LED code. What does this signify?（）
A. varyon of the paging device failed.
B. fsck of the root (/) filesystem failed.
C. varyon of the root volume group failed.
D. IPL device could not be opened or a read failed.

[单项选择] An LPAR has hung during a reboot， reporting a 0552 LED code. What does this signify？（）
A. varyon of the paging device failed.
B. fsck of the root （/） filesystem failed.
C. varyon of the root volume group failed.
D. IPL device could not be opened or a read failed.

[单项选择] A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?（）
A. Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
B. Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
C. Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
D. Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.

[单项选择] A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）
A. In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.
B. In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.
C. In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.
D. In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.

[单项选择] A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）
A. Dual power supplies.
B. Twice the amount of disk.
C. Two dual-port LHEA adapters.
D. Two dual-port fibre channel adapters.

[单项选择] A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed， the fibre cables are attached to the adapters. How should the administrator configure the disks？（）
A. Run ’mkdev’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
B. Run ’mkpath’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
C. Run ’chpath’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
D. Run ’cfgmgr’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.

[单项选择]An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）
A. On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
B. On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
C. On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi# On the VIO Server: rmdev -dev  rootvg_disk, rmlv rootlv_name
D. On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name On the AIX LPAR: rmdev -dl  hdisk#, rmdev -dl vscsi#

[单项选择] Companycom has a Linux LPAR on a p5 570 server. The 3rd party storage subsystem devices are not supported by Linux. How would access be provided to the storage subsystem devices for this Linux LPAR?（）
A. Daisy chain the unsupported 3rd party storage subsystem devices with the local SCSI disk drive 
B. Assuming the 3rd party storage subsystem has AIX support, enable access through a Virtual IO Server 
C. Assuming the 3rd party storage subsystem has AIX support, implement the Linux partition within an AIX partition 
D. 3rd party storage is not an option for p5 570 servers and therefore only IBM disk subsystems can be considered as a solution

[单项选择]A customer has an LPAR with 4 dedicated cores on a POWER7 server with SMT4 enabled. How many logical processors are presented to an application running on this LPAR?（）
A. 4
B. 8
C. 16
D. 32

[单项选择]One of the workers (has) (hung) the curtains that (had) been (laying) on the floor.
A. has
B. hung
C. had
D. laying

[单项选择] An administrator is configuring an LPAR for a NIM installation and is unsure if the 'Ping Test' option within SMS is a required configuration step. Which statement best describes the 'Ping Test' option?（）
A. The 'Ping Test' is a recommended step to verify the IP information entered into the RIPL SMS panel.
B. The 'Ping Test' is a mandatory step required to commit the IP information entered into the RIPL SMS panel.
C. The 'Ping Test' is an optional step to verify network configuration entered into the RIPL SMS panel on older copper-based networks.
D. The 'Ping Test' is an optional step to verify network connectivity between client and server, where ICMP traffic is allowed on the connecting network.

[单项选择]After making changes to the profile for an LPAR, the administrator asks the operator to bring the LPAR back up into a running state with the new changes. Which of the following is the correct way to do this?（）
A. Shutdown and activate the partition profile
B. Reboot the partition using the reboot command
C. Reboot the partition using the 'shutdown -r' command
D. Right click on the partition profile and select the 'apply changes' option

[单项选择] LPAR1 is configured to have the same 2 LUNs virtualized by a redundant pair of VIO servers. Which command will validate thatboth storage paths are available?（）
A. lspath
B. sdd query adapter
C. pcmpath query adapter
D. datapath query device

[单项选择] An administrator is supporting an AIX 6.1 LPAR remotely and needs a tape operator to plug a cable into an Ethernet adapter. The tape operator does not have POWER6 595 knowledge. What can the administrator do to assist the tape operator to locate the correct adapter?（）
A. Advise the tape operator to review the hardware service guide.
B. Use the diag command to set the Ethernet adapter slot LED to flash.
C. Advise the tape operator to check the WWN stickers of all Ethernet adapter in the I/O drawers.
D. Create a login account for tape operator on the HMC and advise the tape operator to locate the adapter using the GUI step by step.

[单项选择]当对HARRIS交换机进行REBOOT时，会影响通话，所以避免在通话忙时REBOOT。在下面什么情况下，需要HARRIS交换机进行REBOOT？（）
A. 修改了COL表
B. 修改了配线架连线
C. 为分机增加来电显示功能
D. 增加了分机电话

[单项选择] LPAR1 is configured to have the same 2 LUNs virtualized by a redundant pair of VIO servers.  Which command will validate that both storage paths are available？（）
A. lspath
B. sdd query adapter
C. pcmpath query adapter
D. datapath query device

[单项选择]Companycom LPAR that is using a Virtual IO Server needs to be more highly available. How can this be accomplished using APV features?（）
A. Reallocate the Virtual IO Server disks to the user LPAR
B. Create a stripe-group within the Virtual IO Server to protect against disk failure
C. Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
D. Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO  Servers