更多"A technician is going to install a "的相关试题:
[单项选择] There are three IS-IS routers on a Gigabit Ethernet segment: Router A, Router B, and Router C. Each router is configured in the same area and each routers Gigabit Ethernet interface is configured for Level 1-only. Router A is the Designated Intermediate System (DIS). Each routers IP address on that segment is: Router A: 10.1.1.1/24 Router B: 10.1.1.2/24 Router C: 10.2.2.1/26 Which statement is true about all the adjacencies that exist on that LAN?（）
A. No routers are adjacent with each other.
B. Only Router A and Router B are adjacent at Level 1.
C. Only Router A and Router B are adjacent at Level 2.
D. All three routers are adjacent with each other at Level 1.
[单项选择]A technician needs to install additional access points for a new high speed connection being added in the new office space. Which of the following will MOST likely be installed to allow additional CAT5 cable connections?（）
A. Smart Jack
B. Demarc
C. 110 Block
D. 66 Block
[单项选择]A technician is dispatched to install additional RAM in a computer. The technician unplugs thesystem from the power source, and removes the cover of the PC. Which of the following shouldthe technician do NEXT?（）
A. Update the BIOS for compatibility.
B. Put on an ESD strap.
C. Use an anti-static bag to hold the RAM while installing.
D. Clean out the PC with compressed air.
[单项选择]A technician is trying to install a previous-generation expansion card into their new laptop.However, the card refuses to fit into the expansion slot. Which of the following is MOST likely the reason?（）
A. The card needs to have the compatibility jumpers set before it can be installed into the system.
B. The card is a PCI Express card and the laptop supports pcmica.
C. The expansion slot needs to be enabled in the blos first.
D. The card is a PCMCIA card and the laptop supports PCI Express cards.
[多项选择]Which two statements are true regarding an Ethernet collision domain?（）
A. If a switch is used, the collision domain is limited to each device and the switch.
B. If a hub is used, the collision domain is limited to each device and the hub.
C. If a hub is used, the collision domain includes all devices connected to the hub.
D. If a switch is used, the collision domain includes all devices connected to the switch.
[多项选择]Which two E-series functions allow Bridged Ethernet subscribers the ability to recieve a dynamic IP address? （）(Choose two.)
A. DHCP standalone server
B. DHCP exclusive-access server
C. DHCP relay agent
D. DHCP relay proxy
[单项选择]A standard IP access list is applied to an Ethernet interface of a router. What does this standard access list filter on?（）
A. The source and destination addresses
B. The destination port number
C. The destination address
D. The source address
E. All of the above
[单项选择]下列属于共享介质局域网的是( )。 Ⅰ Ethernet Ⅱ Switched Ethernet Ⅲ FDDI Ⅳ ATM LAN Ⅴ Token Bus Ⅵ Token Ring
A. Ⅰ、Ⅱ、Ⅲ、Ⅵ
B. Ⅰ、Ⅱ、Ⅳ、Ⅴ
C. Ⅱ、Ⅲ、Ⅳ、Ⅴ
D. Ⅰ、Ⅲ、Ⅴ、Ⅵ
[单项选择]A customer has two Ethernet Switch Modules installed in an IBM BladeCenter Enterprise chassis. The modules were configured identically. The Ethernet module in bay one was inadvertenly reset to factory defaults. Which solution returns the module to the customer-specific configuration?（）
A. Back up the configuration from Ethernet module in bay 2 and restore it to the module in Bay 1 using the switch CLI or Web interface
B. Swap the modules, which will automatically resynch the settings stored in the Advanced Management Module
C. Back up the configuration of the Ethernet module in bay one and restore it to the Ethernet module in bay two using the AMM
D. Restore the configuration from NVRAM using the Switch Module Web interface
[单项选择]After adding a new Ethernet card to a system and rebooting， the system administrator notices the card was not configured. How can the system administrator determine if there were errors during the configuration process for the card？（）
A. Examine the bootlog with the command： alog -o -f /var/adm/ras/bootlog
B. Display the device attributes and errors with the command： lsdev -C -l ent0
C. Examine the AIX errlog for configuration method errors with the command： errpt -a -C ent0
D. Examine the ODM for configuration errors with the command： odmget -q "method_errors" ent0
[单项选择]A technician finished installing antivirus software. Which of the following should the technician perform NEXT?（）
A. Run a full scan on the local disk.
B. Remove infected files.
C. Update antivirus signatures.
D. Quarantine infected files
[单项选择]Which of the following describes 1Gigabit Ethernet?（）
A. 10GBase-ER
B. 10Base-2
C. 1000Base-T
D. 100Base-5
[多项选择]What is the IEEE standard associated with Gigabit Ethernet?（）
A. 802.11
B. 802.5
C. 802.3ab
D. 802.3ae
E. 802.3z
F. 802.3u
