[单项选择]You have received a default route through BGP from your ISP and you want to redistribute it into OSPF.Which mehtod will accomplish this?（）
A. Apply an export policy to OSPF that exports the default route
B. Apply an import policy to OSPF that imports the default route
C. Apply the default-network command to OSPF
D. Apply the redistribute-igp command to BGP

[单项选择]You have received a default route through BGP from your ISP and you want to redistribute it into OSPF.Which method will accomplish this?（）
A. Apply an export policy to OSPF that exports the default route
B. Apply an import policy to OSPF that imports the default route
C. Apply the default-network command to OSPF
D. Apply the redistribute-igp command to BGP

[单项选择]Router R1, in ASN 11, learns a BGP route from BGP peer R22 in ASN 22. R1 and then uses BGP to advertise the route to R2, also in ASN 11. What ASNs would you see in the BGP table on R2 for this route?（）
A. 22
B. 11
C. 1
D. None

[单项选择] BGP route dampening is configured on a BGP router. Whose routing behavior is affected by this configuration?（）
A. upstream EBGP neighbors
B. downstream EBGP neighbors
C. upstream IBGP neighbors learned by IBGP peers
D. downstream IBGP neighbors learned by IBGP peers

[多项选择] You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one o f the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes. Which two things should you verify to troubleshoot this problem?（）
A. The border router is using a proper seed metric for OSPF
B. The border ro uter is using a proper seed metric for EIGRP
C. The administrative distance is set for OSPF and EIGRP
D. The missing EIGRP routes are present in the routing table of the border router
E. The subnet keyword on the border router in the redistribute EIG RP command

[单项选择] You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem?（）
A. The border router is using a proper seed metric for OSPF
B. The border router is using a proper seed metric for EIGRP
C. The administrative distance is set for OSPF and EIGRP
D. The missing OSPF routes are present in the routing  table of the border router
E. The subnet keyword on the border router in the redistribute OSPF command

[单项选择]PassGuide has a BGP network and a BGP route of 197.22.129.0/24 that should be propagated to all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route（）
A. Use the service-policy command to adjust the QOS policy to allow the route to propagate.
B. Clear the BGP session.
C. Use the release BGP routing command.
D. Change both the inbound and outbound policy related to this route.
E. None of the other alternatives apply

[单项选择]You have just configured a static default route on router TK1. What is the purpose of a default route?（）
A. It is a route to be used when the routing protocol fails.
B. It is a route configured by an ISP that sends traffic into a corporate network.
C. It is a route used when a packet is destined for a remote network that is not listed in the routing table.
D. It is a route manually configured for a specific remote network for which a routing protocol is not configured.
E. It is used to send traffic to a stub network.

[单项选择]You have been asked to create a static route with a next hop that is not directly connected to the router.Which configuration parameter enables the static route to accomplish this scenario?（）
A. resolve
B. indirect
C. next-hop
D. recursive

[多项选择]You have been asked to configure a default route. Which of the IOS commands mentioned below will accomplish this task?（）
A. LTD(config)# ip route 0.0.0.0 0.0.0.0 192.168.15.36
B. LTD(config)# ip route 0.0.0.0 192.168.15.36 255.255.255.255
C. LTD# ip default-network 0.0.0.0 192.168.15.36 255.255.255.255
D. LTD(config)# ip route 0.0.0.0 0.0.0.0 E0
E. LTD(config)# ip route 0.0.0.0 255.255.255.255 S0
F. LTD(config-router)# ip route 255.255.255.255 0.0.0.0 192.168.15.36

[单项选择]Which statement describes the purpose of BGP route damping?（）
A. Avoid interface bandwidth saturation.
B. Drop BGP routes when the routing-table becomes full.
C. Remove unnecessary route attributes when not in use.
D. Limit the effects of a flaping interface on route removal and readvertisement.

[多项选择]Which two BGP attributes support route reflection?（）
A. Client ID
B. Cluster list
C. Originator ID
D. Reflection community

[单项选择]What does a BGP route reflector do when reflecting a route?（）
A. It prepends its cluster identifier to the route's cluster list.
B. It prepends its own originator identifier to the route's cluster list.
C. It replaces the route's cluster identifier with its own cluster identifier.
D. It replaces the route's originator identifier with its originator identifier.

[单项选择]Which BGP route selection criterion is superior?（）
A. lowest MED
B. highest weight
C. lowest local preference
D. highest local preference

[多项选择]What are two advantages of BGP route aggregation?（） (Choose two.)
A. It can reduce routing table size.
B. It allows for optimal route selection.
C. It can reduce the number of routing updates.
D. It always shortens the attribute list for the aggregated route.

[单项选择]What is the first step in BGP route selection?（）
A. The local router prefers the route with the shortest AS Path.
B. The local router verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.