更多"A technician receives a boot error "的相关试题:
[单项选择]A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?（）
A. Hard disk drive failure
B. NTLDR file is missing
C. BIOS is corrupted
D. System board failure
[单项选择]A technician receives an urgent call that the switch in accounting is down. Which of the followingshould the technician do FIRST to troubleshoot this issue?（）
A. Identity symptoms and problems
B. Document the process and solutions
C. Establish the most probable cause
D. Escalate if necessary.
[单项选择] A technician receives a call on monday morning that several computers will not connect to the network. The technician determines that the computers left on over the weekend are functional and those that were turned off over the weekend are not functioning. Which of the following is the MOST likely source of the problem?（）
A. DHCP is not functioning.
B. WINS needs to be restarted.
C. DNS is not functioning.
D. LDAP is not functioning.
[单项选择]During a system boot, an error message appears concerning a paging space, paging00. The paging space was located on hdisk2, but the disk was removed from the system without proper software procedures. Which of the following commands should be used as the first step in the process of recovery?（）
A. mkps paging00 hdisk0
B. chpv -v r hdisk2
C. chps -a n paging00
D. reducevg rootvg hdisk2
[单项选择]A user states they receive a message Boot device not found half of the time they boot their system.Which of the following is the MOST likely cause? （）
A. A dead CMOS battery
B. The OS is not installed on the hard drive
C. A faulty RAM
D. A faulty HDD connection
[单项选择]A technician receives a printer that is printing ink smudges on random sheets of paper. Which of the following should the technician try FIRST？（）
A. Replace the printer.
B. Replace print head assembly.
C. Clean the print head.
D. Use a different brand of paper.
[单项选择]A technician receives a laptop that is running out of battery power more quickly than expected.Which of the following can the technician do to correct the problem？ （）
A. Note on the work order that the laptop is losing battery capabilities and the laptop must be replaced.
B. Replace the battery by purchasing a new battery from the manufacturer.
C. Stop using the battery and use alternating current （AC） power for the laptop.
D. Replace the AC adaptor by purchasing a new adapter from the manufacturer.
[单项选择]A technician receives a computer for repair and observes that the fan on the power supply is not moving. Which of the following should the technician do？ （）
A. Move the power supply voltage switch to 220 volts.
B. Add an additional fan to help cool the computer.
C. Replace the cable that attaches the power supply to the motherboard.
D. Replace the power supply.
[单项选择]A technician receives a work order requesting the installation of an NLX motherboard into a micro ATX case. Which of the following should the technician recognize？（）
A. A standard ATX power supply will not be able to connect to the NLX adapter.
B. The system will not start up.
C. The case is too small for the motherboard.
D. The motherboard was not meant for this style of case.
[单项选择]A technician receives a new printer for repair and the work order states that when powered on theprinter makes a loud noise and will not print. Which of the following actions should the technician take？ （）
A. Install new drivers on the computer.
B. Install a new ink cartridge.
C. Install a print head on the printer.
D. Remove the packing tape from the print head.
[单项选择]A technician receives a dot matrix printer for repair and the work order states that the printer is only printing one-half of each character. Which of the following should the technician replace？（）
A. print head
B. fuser
C. injector
D. print nozzle
[单项选择]A network administrator receives an error message while tring to configure the Ethernet interface of a router with IP address 10.24.24.24/29.which statement explains the reason for this issue?（）
A. The address is a broadcast address
B. The Ehernet interface is faulty
C. VLSM-capable routing protocols must be enable first on the router.
D. This address is a network address.
[单项选择]After POST, the error message ‘Invalid system disk. Replace and press any key’ appears. Which of the following is MOST likely the cause?（）
A. There is a non-bootable CD in the CD-ROM drive.
B. There is a non-bootable DVD in the DVD-ROM drive.
C. There is a non-bootable Blu-Ray in the Blu-Ray drive.
D. There is a non-bootable floppy in the floppy drive.
[单项选择]A workstation has an error message that states “NTLDR is missing”. Which of the following is MOST likely the cause?（）
A. The system did not shutdown gracefully
B. The CMOS battery is dead
C. The BIOS firmware is corrupt
D. A virus has corrupted the file
