更多"Which configuration command allows "的相关试题:
[单项选择]Which configuration command allows the router to utilize a RADIUS server to auth enticate in coming Telnet users?()
A. aaa new-model
B. aaa telnet login
C. telnet authentication login
D. authentication telnet login
[单项选择]Which configuration command allows the ERX Edge Router to advertise customer networks into the provider’s IGP?()
A. redistribute direct
B. redistribute static
C. redistribute connected
D. redistribute access-internal
[单项选择]Which RIP configuration command allows the ERX Edge Router to send Unicast updates to configured neighbors?()
A. neighbor
B. unicast-neighbor
C. triggered-update
D. passive-interface
[单项选择]Which configuration command enables the router for SNMP?()
A. snmp-client
B. snmp-server
C. snmp-clientenable
D. snmp-serverenable
[单项选择]Which configuration command configures queue buffer allocation on the ERX Edge Router?()
A. qos-profile
B. queue-profile
C. scheduler-profile
D. traffic-shape-profile
[单项选择]Which configuration command permits dynamic detection of the ATM frame format?()
A. aal5mux
B. aal5snap
C. aal5dynamic
D. aal5autoconfig
[单项选择]Which configuration command dynamically detects and configures a PPPoA interface?()
A. auto-configure ip
B. auto-configure ppp
C. auto-configure pppoe
D. auto-configure bridgedethernet
[单项选择]Which profile configuration command dynamically creates a host route in the routing table?()
A. ip host routes
B. ip access-routes
C. host routes enabled
D. access-routes enabled
[单项选择]Which configuration command creates a virtual router called isp-1?()
A. virtual-routerisp-1
B. virtual-routerISP-1
C. virtual-routerVRisp-1
D. virtual-routerVRISP-1
[单项选择]Which configuration command sets the MPLS interface bandwidth to 15 Mbps?()
A. set bandwidth 15
B. mpls bandwidth 15
C. set bandwidth 15000
D. mpls bandwidth 15000
[单项选择]Which configuration command represents a static host route in a Routed 1483 network?()
A. iproute 172.10.1.20.0.0.0 atm 6/0.33
B. iproute 172.10.1.2255.255.255.0 atm 6/0.33
C. iproute 172.10.1.2255.255.255.255 172.10.1.2
D. iproute 172.10.1.2255.255.255.255 atm 6/0.33
[单项选择]Which configuration command controls the source IP address for packets sent to a RADIUS server?()
A. radius override nas-ip-addr
B. radius source-ip-address 10.13.7.55
C. radius update-source-address 10.13.7.11
D. radius authentication server 10.13.7.55
[单项选择]Which configuration command represents a static customer route in a Routed 1483 network?()
A. ip route 40.40.0.0255.255.0.0 172.10.1.2
B. ip route 40.40.0.00.0.255.255 atm 6/0.33
C. ip route 40.40.0.00.0.255.255 172.10.1.2
D. ip route 40.40.0.0255.255.0.0 atm 6/0.33
[单项选择]Which configuration command establishes an EBGP session to a peer in AS 300?()
A. neighbor 200.16.1.2 remote-as 300
B. bgp-neighbor 200.16.1.2 remote-as 300
C. ebgp-neighbor 200.16.1.2 remote-as 300
D. neighbor 200.16.1.2 remote-as 300 connection-type ebgp
[单项选择]Which configuration command causes a PPPoE subscriber to be connected to a captive portal?()
A. url
B. motm
C. acName
D. sessions
[单项选择]Which configuration command prevents a client from establishing multiple PPPoE connections from a single workstation?()
A. sessions
B. sa-validate
C. split-horizon
D. duplicate-protection
[单项选择]Which RADIUS configuration command implements a primary/backup scenario for multiple servers?()
A. radius algorithm direct
B. radius algorithm backup
C. radius algorithm primary
D. radius algorithm round-robin