更多"[多选题]68 An LTM Specialist needs to "的相关试题:
[单选题]54 What should an LTM Specialist configure on an LTM device to send AVR notification emails?
A.Email notification to be sent via iControl from the LTM device
B.Syslog on the LTM device to send to an SMTP server
C.Custom SNMP traps on the LTM device for AVR notifications
D.Email notification to be sent via SMTP from the LTM device
[单选题]29 An LTM Specialist needs to configure a virtual server with the requirements displayed below. Application is currently an internal HTTP application
Encrypted external user access
Links are hard for siteA example.com and need to rewritten to siteB.Example.com Which profiles must the LTM Specialist use to provide the proper functionality?
A.Clientssll, Stream
B.Serverless, Stream
C.Clientssl, fastL4, Stream
D.Serverless, fastL4, Stream
[单选题]25 An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration.
Which feature should the LTM Specialist configure?
A.NAT pool
B.NAT address
C.SNAT pool
D.SNAT address
[单选题]19 An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.
Which values should the LTM Specialist enter for interval and timeout?
A.Interval 10, timeout 30
B.Interval 10, timeout 31
C.Interval 30, timeout 30
D.Interval 30, timeout 91
The official recommendation is that timeout 3 times the interval value +1.
[单选题]24 An LTM Specialist needs to provide statistics regarding the round-trip time between the clients and the servers.
Which metric should be part of the analytics profile to provide that information?
A.Page Load Time
B.User Sessions
C.Max TPS and Throughout
D.Response Codes
[单选题]16 An LTM Specialist needs to configures virtual server that uses PVA or OPVA Which virtual server type should be used?
A.Stateless
B.Performance (HTTP)
C.Standard
D.Performance (Layer 4)
[单选题]71 An LTM Specialist needs to terminate client SSL traffic and based on the cookie presented by client.
Which set of profiles should the LTM Specialist use?
A.HTTPS, Client SSL, Cookie Persistence Profile
B.HTTP, Server SSL, SSL Cookie Profile
C.HTTPS, Server SSL, SSL Cookie Profile
D.HTTP, Client SSL, Cookie Persistence Profile,
[单选题]139 An LTM Specialist needs to provide access to a 8BG-IP to device for a company's support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings. All support have accounts in the company's Active Directory Which method is appropriate to provide access for the support personnel to the BIG-JP device?
A.configure remote authentication for all users with a default user role of Guest
B.configure remote authentication and map support personnel users to the Guest user role
C.configure remote authentication and map support personnel users to the Operator user role
D.configure remote authentication for all users with a default user role of Operator
[单选题] An LTM Specialist needs to upgrade all guests on a Viprion eight CMP guests. What is the maximum number of guests that the LTM Specialist should upgrade at once?
A.Eight
B.One
C.TWO
D.Four
[单选题]5 An TLM Specialist needs to configure a virtual server to terminate SSL connection on the LTM device.
Cryptographic information must be re-authorized for SSL sessions that remain open for longer than 30 seconds.
Which settings should the LTM Specialist configure in the client SSL profile?
A.set the Handshake Timeout to 30 seconds
B.enable Require Peer SN1 Support
C.set the Renegotiate Period to 30 seconds
D.set the Renegotiate Max Record Delay to 30
[单选题]8 An LTM Specialist needs to gather website statistics such as latency and throughput on the existing virtual server. This virtual server load Balances the backend web servers.
Which F5 feature will provide this?
A.the Performance panel
B.the AVR module
C.the Dashboard
D.the Statistics panel
[单选题]33 An LTM Specialist needs to create an iRule that creates persistence records based on a JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.
Which persistence profile enables the iRule to meet these requirements?
A.Universal
B.SSL
C.Destination Address Affinity
D.Cookie
E.Source Address Affinity
[单选题]91 An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application. The application uses a simple request response protocol where each request and response is contained within a single packet.
Which configuration option should the LTM Specialist adjust?
A.increase the connection limit for pool members
B.increase the idle Timeout in a custom TCP profile
C.use a Performance (Layer 4) Virtual Server
D.assign a OneConnect profile
[单选题]72 An LTM Specialist needs to load balance an application using an LTM device to meet the requirements:
The application servers do NOT Support SSL, but client access to the application should be secured. Multiple requests from the same client should be sent to the same pool member.
All pool members will have roughly the same processing power, and traffic should be distributed evenly.
The LTM device is NOT the pool members' default gateway. which configuration should the LTM Specialist.
A.a performance 14 virtual server with a SNAT and cookie persistence
B.a performance L4 virtual server with a Client SSL profile and Source Address persistence
C.A performance L4 virtual server with a SNAT, HTTP profile. Server SSL profile, and cookie persistence
D.A standard virtual server with a SNAT, HTTP profile Server SSL profile, and cookie persistence
E.A standard virtual server with a SNAT, HTTP profile, Client profile, andd cookie persistance.
[单选题]93 An LTM Specialist needs to apply SNAT using currently used SNAT pool to a new virtual server.
What needs to be completed before applying that configuration change?
A.Review connection for the selected SNAT pool and enlarge it if appropriate
B.Make sure that the BIG-IP device is NOT operating under heavy load during peak times
C.Verify that the IP address of the SNAT pool are in the same subnet as the pool members
D.Verify that the IP address of the SNAT pool are in the same VLAN as the pool members.
SNAT does not need to in the same vlan or same network segment as the pool member, as long as the route is reachable , excluding C and D he connection information of the SNAT pool to avoid port exhaustion under high concurrency
[单选题]58 An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances.
In which should the LTM Specialist perform this upgrade?
A.Relicense the host. Failover all guest's active traffic-groups to the other host, copy image to gest, create guest UCS install and set boot location to new volume, reboot
B.Failover this specific guest's active traffic-group to the other Host, Relicense the guest, copy image to guest , create guest UCS, install and set boot location to new volume, reboot
C.Failover all guests' active traffic-group to the other Host, Relicense the host, copy image to guest, create guest UCS, install and set boot location to new volume , reboot
D.Failover all guests' active traffic-group to the other host, copy image to guest, create guest UCS install and set boot location to new volume, reboot, Relicense the host
[单选题]107 An LTM Specialist needs to create two virtual servers.
The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.
What must be selected in the Source Address Affinity persistence profile?
A.Match across Virtual Servers
B.Match across Pool Members
C.Match across Services
D.Match across Polls
[单选题]150 An LTM Specialist needs to force only FTP traffic, sourced from subnet 10.10.10.0/24 to virtual server 10.10.20.1 to the new FTP1 server. The following virtual servers are configured on the LTM device:
Traffic sourced from 10.10.10/24 must use the specific pool member for load balancing. Which configuration change is needed to meet the requirements?
A.Create a new virtual server for traffic sourced from 10.10.10.0/24 on port 80 that is destined to 10.10.20.1/32, and create a new pool has only the pool member FTP1 defined.
B.Add FTP1 to the pool assigned to the MyVS4 virtual server, and remove all other pool members from the pool.
C.Create a new virtual server for traffic sourced from 10.10.10.0/24 on traffic sourced from 10.10.10./24 on port 21 that is destined to 10.10.20.1/32, and create a new pool that has only the pool member FTP1 defined.
D.Add FTP1 to the pool assigned to the MyVS2 virtual server, and remove all other pool member from the pool.
[单选题]135 An LTM Specialist needs to deploy a virtual server that will load balance traffic targeting https://register.example.com to a set of three web servers. Persistence needs to be ensured. No persistence mirroring is allowed SSL offloading is required.
A fourth web server with fewer resources will be used to handle requests from engine bots to https://register.example.comvrobots.txt by an iRule. The (Rule will use the HTTP_REQUEST event. .
What are the required profile and persistence settings to implement this
A.tcp. dientssl, hup, source address persistence
B.tcp, clientssl, http. cookie persistence
C.tcp, clientssl, serverssl, ssl persistence
D.tcp, clientssl, http, serverssl cookie persistence
