更多"[多选题]uMAC系统组网中，涉及到的接口包括（ ）。
In the "的相关试题:
[单选题]uMAC系统组网中，Gs口是和（ ）直接的接口。
In the uMAC system networking structure, the Gs interface is directly connected to the ( ).
A.GGSN
B.RNC
C.MSC
D.HLR
[多选题]在uMAC系统中，独立单板的升级包括（）。
In the uMAC system, upgrade of independent boards includes: ( ).
A.OMM升级
OMM upgrade
B.ECMM升级
ECMM upgrade
C.EGBS升级
EGBS upgrade
D.EGFS升级
EGFS upgrade
[单选题]uMAC系统是基于（）协议版本开发。
The uMAC system is developed based on the ( ) protocol.
A.R5
B.R6
C.R7
D.R8
[多选题]uMAC系统的升级可以分为（）。
Upgrade of the uMAC system includes: ( ).
A.DPI文件升级
Upgrade of DPI files
B.OMM服务器版本升级
Version upgrade of the OMM server
C.独立交换单板版本升级
Version upgrade of independent boards
D.前台业务单板版本
Version upgrade of foreground service boards
[多选题]uMAC升级需要备份的网管安装目录包括（）。
During uMAC system upgrade, we need to back up the following OMM installation directories: ( ).
A.ngomm
B.ngomm_data
C.ngomm_backup
D.installagent
[单选题]uMAC 系统中， OMP的默认IP地址为（）。
In the uMAC system, the default IP address of the OMP is ().
A.128.局号.0.1
128.Office No.0.1
B.128.0.局号.1
128.0.Office No.1
C.129.局号.0.1
129.Office No.0.1
D.129.0.局号.1
129.0.Office No.1
[单选题]uMAC系统中，EGBS的槽位是（）。
In the uMAC system, the EGBS board is installed in following slots: ( ).
A.主备分别为9和10槽
slot 9/10 for master/slave boards
B.主备分别为21和22槽
slot 21/22 for master/slave boards
C.主备分别为5和6槽
slot 5/6 for master/slave boards
D.主备分别为29和30槽
slot 29/30 for master/slave boards
[单选题]uMAC系统中，ECMM的槽位是（）。
In the uMAC system, the ECMM board is installed in following slots: ( ).
A.主备分别为9和10槽
slot 9/10 for master/slave boards
B.主备分别为21和22槽
slot 21/22 for master/slave boards
C.主备分别为5和6槽
slot 5/6 for master/slave boards
D.主备分别为29和30槽
slot 29/30 for master/slave boards
[单选题]uMAC系统中，EGFS的槽位是（）。
In the uMAC system, the EGFS board is installed in following slots: ( ).
A.主备分别为9和10槽
slot 9/10 for master/slave boards
B.主备分别为21和22槽
slot 21/22 for master/slave boards
C.主备分别为5和6槽
slot 5/6 for master/slave boards
D.主备分别为29和30槽
slot 29/30 for master/slave boards
[多选题]在uMAC系统中，下面是负荷分担的单板有（）。
In the uMAC system, the following boards work in load sharing mode: ( ).
A.USPB
B.UFRB
C.UBSW
D.UAPB
[单选题]uMAC系统组网中，下面哪个接口组网时，两个物理接口建议工作主备方式？（ ）
In the uMAC system, during networking of the ( ) interface, it is recommended to configure the two physical interfaces in active/standby working modes.
A.Gn
B.IuPS
C.Gr
D.Ga
[多选题]在uMAC系统中，下面是1+1主备的单板有（）。
In the uMAC system, the following boards work in 1+1 backup mode: ( ).
A.UOMP
B.USUP
C.USPB
D.USMP
[多选题]在uMAC系统中，下面是互为主备的槽位有（）。
In the uMAC system, the following slots are set to active/standby mode: ( ).
A.1和3 槽
Slot 1/3
B.5和6 槽
Slot 5/6
C.11和13 槽
Slot 11/13
D.15和17 槽
Slot 15/17
[单选题]uMAC系统组网中，下面哪个接口组网时，外部交换机建议工作在二层？（ ）
In the uMAC system, during networking of the ( ) interface, it is recommended to make the external switch work on layer-2.
A.Gn
B.IuPS
C.Gr
D.Ga
[判断题]uMAC系统组网中，各个接口的业务地址都配置在loopback上。
A.正确
B.错误
[判断题]uMAC系统组网中，各个接口的业务地址都配置在loopback上。
In the uMAC system networking structure, service addresses of all interfaces are configured on the loopback.
A.正确
B.错误
[多选题]uMAC系统组网中，下面哪些接口建议使用OSPF？（ ）
In the uMAC system networking structure, it is recommended to use OSPF for the following interfaces: ( ).
A.Gn
B.IuPS
C.Gb
D.Gr
[判断题]供电远动系统通信接口分界参照《铁路供电调度系统通信组网技术方案指导意见》相关规定执行。
A.正确
B.错误
[多选题][固定资产]系统与其它子系统的接口主要涉及到( )
A. 资金系统
B. 总账系统
C.成本系统
D. 决策支持系统
