更多"[单选题]A vSphere Administrator must e"的相关试题:
[多选题]
A network administrator wants to ensure that only the server can connect to port Fa0./1. on a Catalyst
Switch. The server is plugged into the switch Fa0./1. port and the network administrator is about to bring the
Server online. What can the administrator do to ensure that only the MAC address of the server is allowed
By switch port Fa0./1.? (Choose two.)
A. Configure port Fa0./1. to accept connections only from the static IP address of the server.
B. Employ a proprietary connector type on Fa0./1. that is incompatible with other host connectors.
C. Configure the MAC address of the server as a static entry associated with port Fa0./1..
D. Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofingthe server IP address.
E. Configure port security on Fa0./1. to reject traffic with a source MAC address other than that of theserver.
F. Configure an access list on the switch to deny server traffic from entering any port other than Fa0./1..
[单选题]A vSphere Administrator wants to reserve 0.5 Gbps for virtual machines on each uplink on a disturbed switch that has 10 uplinks.What is the quota that should be reserved for the network resource pool?
A. 10 Gbps
B. 5 Gbps
C. 100 Gbps
D. 0.5 Gbps
[单选题]After upgrading the vSphere infrastructure and VMware Tools to version 6.5, the “Upgrade VM Compatibility” option is grayed out in the vSphere Web Client. (See Exhibit.) What must the administrator do to enable the VM compatibility upgrade?
A. VMware Tools should be upgraded last.
B. Restart the ESXi server.
C. Uninstall VMware Tools.
D.Power off the virtual machine.
[单选题]In a vSphere environment, two resource pools are created as shown in the Exhibit. Each VM is configured with 1 GB of memory. When the administrator tried to power on VM3, the operation failed. What action in the resource pool settings will allow VM3 to power on successfully?
A.Deselect Expandable Memory Reservation
B.Increase Memory Reservation
C.Deselect Expandable CPU Reservation
D.Increase the CPU Reservation
[单选题]In which scenario will vSphere DRS balance resources when set to Fully Automated?
A. Hosts with only shared storage
B. Hosts are part of a vSphere HA cluster
C. Power Management is set to Balanced on hosts
D. Hosts with shared or non-shared storage
[单选题]Which network is used by vSphere HA when VMware vSAN is enabled?
A. Management network
B. vSphere Replication network
C. vMotion network
D. VSAN network
[单选题]A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?
A. CPU and Memory capacity will be set to 50%.
B. CPU and Memory capacity will be set to 30%.
C. CPU and Memory capacity will be set to 25%.
D. CPU and Memory capacity will be set to 20%.
[单选题]"You need to ensure that when Azure Active Directory (Azure AD) users connect to Azure AD from the Internet by using an anonymous IP address, the users are prompted automatically to change their password. Which Azure service should you use?
A.Azure AD Connect Health
B.Azure AD Privileged Identity Management
C.Azure AD Identity Protection
D.Azure Advanced Threat Protection (ATP)
[单选题]
We provided information to site administrators about typical functions of ________ library programs.
A.
Sampling
B.
Carefree
C.
Descriptive
D.
Exemplary
[单选题]
The network administrator has discovered that the power supply has failed on a switch in the company LAN
And that the switch has stopped functioning. It has been replaced with a Cisco Catalyst 295.0. series switch.
What must be done to ensure that this new switch becomes the root bridge on the network?
A. Lower the bridge priority number.
B. Change the MAC address of the switch.
C. Increase the VTP revision number for the domain.
D. Lower the root path cost on the switch ports.
E. Assign the switch an IP address with the lowest value.
[单选题]
A network administrator is troubleshooing an EIGRP problem on a router and needs to confirm the IP
Addresses of the devices with which the router has established adjacency. The retransmit interval and the
Queue counts for the adjacent routers also need to be checked. What command will display the required
Information?
A. Router# show ip eigrp adjacency
B. Router# show ip eigrp topology
C. Router# show ip eigrp interfaces
D. Router# show ip eigrp neighbors
[单选题]
A network administrator is troubleshooting the OSPF configuration of routers R1. and R2.. The routers
Cannot establish an adjacency relationship on their common Ethernet link. The graphic shows the output of
The show ip ospf interface e0. command for routers R1. and R2.. Based on the information in the graphic,
What is the cause of this problem?
A. The OSPF area is not configured properly.
B. The priority on R1. should be set higher.
C. The cost on R1. should be set higher.
D. The hello and dead timers are not configured properly.
E. A backup designated router needs to be added to the network.
F. The OSPF process ID numbers must match.
[单选题]
The administrator is unable to establish connectivity between two Cisco routers. Upon reviewing the
Command output of both routers, what is the most likely caust of the problem?
A. Authentication needs to be changed to PAP for both routers.
B. Serial IP addresses of routers are not on the same subnet.
C. Username/password is incorrectly configured.
D. Router names are incorrectly configured.
[单选题]
A network administrator is verifying the configuration of a newly installed host by establishing an FTP
Connection to a remote server. What is the highest layer of the protocol stack that the nework administrator
Is using for this operation?
A. application
B. presentation
C. session
D. transport
E. internet
F. data link
[多选题]A network administrator changes the configuration register to 0.x214.2. and reboots the router. What are tworesults of making this change? (Choose two.)
A. The IOS image will be ignored.
B. The router will prompt to enter initial configuration mode.
C. The router will boot to ROM.
D. Any configuration entries in NVRAM will be ignored.
E. The configuration in flash memory will be booted.
[单选题]
A system administrator installed a new switch using a script to configure it. IP connectivity was tested
Using pings to SwitchB. Later attempts to access NewSwitch using Telnet from SwitchA failed. Which
Statement is true?
A. Executing password recovery is required.
B. The virtual terminal lines are misconfigured.
C. Use Telnet to connect to RouterA and then to NewSwitch to correct the error.
D. Power cycle of NewSwitch will return it to a default configuration.
[单选题]
An administrator attempts a traceroute but receives a "Destination Unreadable" message. Which protocol isresponsible for that message?
A. RARP
B. RUDP
C. ICMP
D. SNMP
[单选题]
Which command helps a network administrator to manage memory by displaying flash memory andNVRAM utilization?
A. show secure
B. show file systems
C. show flash
D. show version
[单选题]
A network administrator needs to configure a serial link between the main office and a remote location.The
Router at the remote office is a non-cisco router. How should the network administrator configure the serial
Interface of the main office router to make the connection?
A. Main(config)#interface serial 0./0.Main(config-if)#no shut
B. Main(config)#interface serial 0./0.Main(config-if)#encapsulation ietfMain(config-if)#no shut
C. Main(config)#interface serial 0./0.Main(config-if)#encapsulation frame-relayMain(config-if)#authenication chapMain(config-if)#no shut
D. Main(config)#interface serial 0./0.Main(config-if)#encapsulation pppMain(config-if)#no shut
