更多"[单选题]通过哪条命令可以查看第 2 类 LSA 详细信息?"的相关试题:
[单选题]通过哪条命令可以查看第2类LSA详细信息?
A.displayospflsdbnetwork
B.displayipospfIsdbnetwork
C.displayospflsdbrouter
D.displayipospflsdbrouter
[单选题]通过哪条命令可以查看 OSPF 邻居状态信息?
A.display ospf peer
B. display ip ospf peer
C. display ospfneighbor
D.display ip ospfneighbor
[单选题]通过哪条命令可以查看 OSPF 进程下路由计算的统计信息?
A.displayospfcumulative
B. displayospfspf-statistics
C. displayospfglobal-statistic
D.displayospfrequest-queue
[单选题] 下面哪条命令可以配置华为交换机的端口为 hybrid 模式
A. switchport hybrid
B. hybrid enable
C. port link-type hybrid
D. port mode hybrid
[单选题] 439
VRP操作平台,以下哪条命令可以只查看静态路由?
A. display ip routing-table verbose
B. display ip routing-table statistics
C. display ip routing-table protocol static
D. display ip routing-table
[单选题]以下哪条命令可以改变文件file的所有者为Sam____。 ( )
A. chmod Sam file
B. chown Sam file
C. chgrp Sam file
D. umask Sam file
[单选题] NSA 组网中,用户的 QCI 信息可以在以下哪条命令里获取到?
A.SN Status Transfer
B.RRC CONN RECFG
C.SgNB Add REQ
D.SgNB MOD REQ
[多选题] 以下哪条命令能退出 mysql 状态( )
A. quit
B. exit
C. Ctrl+c
D. Ctrl+z
[单选题]下列哪条命令在华为USG6000系列防火墙中表示不限流? ( )
A. no-qos
B. no-car
C. no-profile
D. no-limit
[单选题] 下面哪条命令是将华为接入交换机的 GE0/0/1 端口加入到 VLAN100 中?
A. interface GigabitEthernet 0/0/1
Port link-type access port default VLAN 100
B. interface GigabitEthernet 0/0/1
Port link-type acess
Port allow-pass VLAN 100
C. interface GigabitEthernet 0/0/1
Port link-type trunk
Trunk allow-pass VLAN 100
D. interface GigabitEthernet 0/0/1
Port link-type trunk
VLAN 100
[单选题]下面关于 LSA3 、LSA4 和 LSA5 描述正确的是:
A.LSA3 在穿越不同区城后, 不会发生改变; 而 LSA4 和 LSA5 会发生变化
B.LSA4 在穿越不同区域后, 不会发生改变; 而 LSA3 和 LSA5 会发生变化
C.LSAS 在穿越不同区域后, 不会发生改变; 而 LSA3 和 LSA4 会发生变化
D.LSA3、LSA4 和 LSA5 在穿越不同区域后, 都不会发生改变
[判断题]551. 通过使用winipcfg命令可以获得本机的IP地址。
A.正确
B.错误
[单选题] 574
VRP操作平台对于输入命令不完整使用下列哪条信息提示?
A. Error:Wrong parameter found at ‘^' position
B. Error:Incomplete command found at '^'position
C. Error:Too many parameters found at '^' position
D. Error:Ambiguous command found at ‘^'position
[单选题]【单选】同频小区重选参数cellReselectionPriority通过哪条系统消息广播?( )[1分]
A.系统消息3
B.系统消息1
C.系统消息5
D.系统消息2