更多"The plunger in the fuel injector pu"的相关试题:
[单项选择]Fuel pump index is ().
A. the viscosity index
B. the fuel oil contents
C. the starting speed
D. the reading at the rack
[单项选择]Engine fuel pump index is ().
A. the viscosity index
B. the fuel oil contents
C. the starting speed
D. the reading at the rack
[单项选择]The major cause of fuel pump and injection system problems is ()
A. improper adjustments
B. contaminated fuel
C. kinked fuel lines
D. excessive engine vibration
[单项选择]A common trouble with the fuel pump plungers or fuel valve spindle is ().
A. broken down
B. stuck
C. oil leakage
D. carbonized
[单项选择]A common trouble with the fuel pump plunger or fuel valve spindle is ().
A. water leakage
B. steam leakage
C. oil leakage
D. air leakage
[单项选择]While overhauling a jerk-type fuel pump it is necessary to replace the pump plungerWhich of the parts listed below must also be replaced?()
A. Delivery check valve
B. Pump barrel
C. Tubing to the injector
D. Cam follower
[单项选择]The fuel booster pump and steam to fuel heater, together with fuel pipe heater tracer line should be shut off as soon as the () order is acknowledged.
A. finished with engines
B. stop
C. stand by
D. full ahead
[单项选择]A centrifugal pump vibrates excessively during operationUpon disassembling the pump it is found that the impeller is out of balanceWithout an available spare, you should ().
A. drill holes through the heavy side of the impeller until it balances
B. weld counterweights to the light side of the impeller
C. remove metal from the heavy side by machining in a lathe
D. acid wash and serape the heavy side until it balances
[单项选择]An increase in the fuel injection pump discharge pressure can be caused by a/an ()
A. leaking delivery valve
B. excessive bearing end play
C. plugged injector spray hole
D. increased plunger stroke
[单项选择]The fuel injector pump is operated by () which drives the plunger up and down.
A. a separate motor
B. a cam
C. a generator
D. a chain
[单项选择]The ()pump is usually used as the bilge feed pump to an oily water separator.
A. turbine
B. screw
C. vane
D. ejector
[单项选择]Fuel injection uses the jet pump system and a Woodward type hydraulic () is used to control engine speed.
A. controller
B. governor
C. instrument
D. apparatus
[单项选择]The fuel is supplied to the pump through ports or openings in the () or cylinder of the pump.
A. bottle
B. injector
C. piston
D. barrel
[单项选择]Movement of the pump control rack in a fuel injection system using individual plunger-type pumps ()
A. changes the position of the fuel inlet ports
B. changes the length of the pump stroke
C. varies the quantity of fuel delivered
D. varies the compression of the delivery valve spring
[单项选择]Failure of fuel injection is usually due to trouble in the ().
A. exhaust valves
B. mechanical lubricators
C. cooling water pumps
D. fuel injection pumps
[单项选择]The ()pump is usually used as the lubricating oil pump.
A. turbine
B. screw
C. vaneejector
D. centrifugal
[单项选择]The ()pump is usually used as the emergency bilge pump.
A. turbine
B. screw
C. vane
D. ejector
[单项选择]In a jerk pump, the amount of fuel that will be forced through the spray nozzle on each upward stroke of the plunger depends on ()
A. the pump supply pressure
B. the slope of the fuel cam
C. how the plunger is rotated
D. the number of sleeve segments engaged with the rack
[单项选择]Fuel injection systems meter fuel, atomize fuel, and ().
A. create turbulence in the combustion chamber
B. aid in completing cylinder scavenging
C. inject fuel at the proper time
D. minimize fuel penetration into the cylinder