更多"An increase in the fuel injection p"的相关试题:
[单项选择]Fuel injection uses the jet pump system and a Woodward type hydraulic （） is used to control engine speed.
A. controller
B. governor
C. instrument
D. apparatus
[单项选择]The major cause of fuel pump and injection system problems is （）
A. improper adjustments
B. contaminated fuel
C. kinked fuel lines
D. excessive engine vibration
[单项选择]Fuel injection systems meter fuel, atomize fuel, and （）.
A. create turbulence in the combustion chamber
B. aid in completing cylinder scavenging
C. inject fuel at the proper time
D. minimize fuel penetration into the cylinder
[单项选择]During the fuel injection period, fuel pressure must exceed cylinder gas pressure to （）.
A. ensure penetration and distribution of the fuel in the combustion chamber
B. ensure the needle valve is flushed clean during each injection
C. prevent combustion gas blowback into the open needle valve
D. prevent reflected pressure waves when the needle valve closes
[单项选择]Fuel pump index is （）.
A. the viscosity index
B. the fuel oil contents
C. the starting speed
D. the reading at the rack
[单项选择]Engine fuel pump index is （）.
A. the viscosity index
B. the fuel oil contents
C. the starting speed
D. the reading at the rack
[单项选择]A common trouble with the fuel pump plungers or fuel valve spindle is （）.
A. broken down
B. stuck
C. oil leakage
D. carbonized
[单项选择]A common trouble with the fuel pump plunger or fuel valve spindle is （）.
A. water leakage
B. steam leakage
C. oil leakage
D. air leakage
[单项选择]While overhauling a jerk-type fuel pump it is necessary to replace the pump plungerWhich of the parts listed below must also be replaced?（）
A. Delivery check valve
B. Pump barrel
C. Tubing to the injector
D. Cam follower
[单项选择]The fuel booster pump and steam to fuel heater, together with fuel pipe heater tracer line should be shut off as soon as the （） order is acknowledged.
A. finished with engines
B. stop
C. stand by
D. full ahead
[单项选择]The plunger in the fuel injector pump, usually operated by a （）, is driven up and down when working.
A. crankshaft
B. camshaft
C. piston rod
D. rack and pinion
[单项选择]The fuel injector pump is operated by （） which drives the plunger up and down.
A. a separate motor
B. a cam
C. a generator
D. a chain
[单项选择]The discharge head of a centrifugal pump will vary directly with the （）.
A. change in impeller diameter
B. square of the impeller diameter
C. cube of the impeller diameter
D. impeller efficiency for large changes in the size of the impeller
[单项选择]Air in the fuel lines to the fuel injection nozzles of a diesel will result in （）.
A. lower compression pressures
B. overheating without smoking
C. failure to start
D. a run away without load
[单项选择]When disassembling or assembling an injection pump plunger and barrel you should （）
A. keep the parts immersed in diesel fuel
B. always keep the plunger and barrel together
C. work over a linoleum-type surface
D. all of the above
[单项选择]The discharge side of every fire pump must be equipped with a（）.
A. gate valve
B. pressure gauge
C. check valve
D. strainer
[单项选择]The valve on the discharge side of a cargo pump on a tank vessel will usually be a（）.
A. butterfly valve
B. spectacle valve
C. check valve
D. globe valve
