更多"When fuel oil has seriously contami"的相关试题:
[单项选择]Diesel engine fuel oil contamination often results in （）
A. governor malfunctions
B. fuel injection system malfunctions
C. high cylinder lube oil temperatures
D. low intake temperatures
[单项选择]Permitting a diesel engine fuel oil day tank to run dry can cause （）
A. overheated injection pumps
B. water condensation in the cylinders
C. fuel dilution of the lube oil
D. air in the fuel system
[单项选择]Clogged diesel engine fuel oil filters can cause（）
A. loss of power
B. misfiring
C. low fuel oil pressure
D. All of the above
[单项选择]
When fuel oil is accidentally missed with lube oil which of the following processes can be used to separate them?（）
Ⅰ.filtering
Ⅱ.settling
A. Ⅰ only
B. Ⅱ only
C. either Ⅰ or Ⅱ
D. neither Ⅰ or Ⅱ
[单项选择]Diesel engine lube oil diluted with fuel oil is indicated by（）
A. decreased viscosity
B. decreased pour point
C. increased flash point
D. increased viscosity
[单项选择]The ignition quality of a diesel fuel oil is indicated by the （）
A. specific gravity
B. cetane number
C. viscosity
D. calorific valve
[单项选择]The cetane number of a diesel fuel oil indicates its（）
A. Viscosity
B. acid content
C. heating value
D. ignition quality
[单项选择]When separating fuel oil in oil separator, the separating quantity is（） of the real quantity.
A. 100%
B. 80%
C. 1/2
D. 1/3
[单项选择]When the fuel oil is burning in the combustion chamber, it （）.
A. gives up large amount of heat
B. gives off large amount of heat
C. gives up large amount of steam
D. gives off large amount of steam
[单项选择]Machinery driving fuel oil transfer and fuel oil service pumps must be fitted with a remote means of stopping the machinery from （）.
A. within the space concerned
B. outside the space concerned
C. the throttle station
D. within the fire room
[单项选择]Fuel oil discharged to the diesel engine cylinder is atomized at the （）
A. turbocharger
B. injection nozzle tip
C. carburetor
D. fuel oil pump
[单项选择]Fuel oil contamination of an auxiliary diesel engine lube oil can result in（）
A. an increased flash point
B. higher lube oil pressures
C. an increased viscosity
D. lower lube oil pressures
[单项选择]Fuel oil transfer systems used onboard diesel propelled vessels are required to have （）.
A. two fuel oil transfer pumps provided where one is to be independent of the main engine
B. two fuel oil transfer pumps, with a combined capacity exceeding the maximum consumption of the main engine
C. engine driven transfer pumps and only used in constant speed applications
D. the capacity of the engine driven pump exceed the consumption rate of the engine to which it is attached
[单项选择]When the opening pressure of a diesel engine fuel injector is greater than that specified by the engine manufacturer, which of the following problems can be expected?（）
A. Quantity of fuel injected tends to be decreased
B. Quantity of fuel injected will always be increased
C. Start of injection tends to be advanced
D. Duration of injection will always greater
[单项选择]
When centrifuging heavy fuel oil, an important factor to consider is the （）
(1) flow rate
(2) viscosity of the fuel oil
A. (1) only is correct
B. (2) only is correct
C. both (1) and (2) are correct
D. neither (1) or (2) are correct
[单项选择]The burning of fuel oil in a diesel engine having a high sodium content, will cause （）
A. corrosion and grooving of exhaust valves
B. corrosion and gumming of the fuel injection pump
C. salt deposits in the exhaust manifold
D. slag deposits in the fuel injection equipment
[单项选择]Late fuel oil injection in a diesel engine can result in （）
A. fuel knock
B. increased power
C. low compression pressure
D. high exhaust temperature
[单项选择]Fuel oil day tanks for diesel engines must be checked and cleaned and cleaned at regular intervals in order to remove（）
A. sludge
B. water
C. micro-organism growth
D. all of the above
[单项选择]Fuel oil injected into the cylinder of a diesel engine just after the piston passes top dead center, will（）
A. increase engine power
B. increase engine load
C. decrease engine power
D. improve fuel economy
