更多"Repairing damage to the hull at or "的相关试题:
[单项选择]Repairing damage to the hull of a ship at or above the waterline reduces the threat of().
A. free surface effects
B. capsizing the ship
C. continued progressive flooding
D. wind overturning moments
[单项选择]The accident()caused damage to my hull.
A. have
B. is
C. will
D. has
[单项选择]I have()damage below water line.
A. large
B. big
C. important
D. major
[单项选择]The accident has caused damage()the ship’s hull.
A. on
B. in
C. at
D. to
[单项选择]In the event of damage to the DEEP WATER SHIP which results in flooding to one of the lower-hull tanks,pump from().
A. nearby damaged tanks
B. nearby undamaged tanks containing ballast
C. tanks on the opposite corner
D. the opposite trim tank
[单项选择]The above-mentioned damage has caused from improper fitting so that we () you () for making compensation.
A. hold;responsibility
B. ask;responsibility
C. hold;responsible
D. require;responsible
[单项选择]Fearing damage from either or both of the above incidents,the Master now()me this note of protest,reserving to himself the right to extend same at time and place convenient.
A. enters
B. enters into
C. enters with
D. enters to
[单项选择]The central longitudinal structural hull strength member of the lower hulls of semisubmersible ship’s is called the().
A. stress plate
B. keel
C. rider plate
D. main beam
[单项选择]The two factors which make underwater hull repair difficult are accessibility and the().
A. availability of tools
B. shape of the hull
C. pressure exerted by the water
D. threat of progressive flooding
[单项选择]Insufficient space between the hull and bottom in shallow water will prevent normal screw currents resulting in ().
A. waste of power
B. sudden sheering to either side
C. sluggish rudder response
D. All of the above
[单项选择]The athwartship hull structural members of a ship are().
A. stringers
B. girders
C. breasthooks
D. deck beams
[单项选择]When ship in the dock repairing, engine department should emphasize on the inspection of()
A. sea valve chest, sect valve, thruster
B. bilge motherboard, steering and the shaft system
C. sea water system
D. fresh water system
[单项选择]The structural members of the hull extending in a fore and aft direction are called ().
A. frames
B. joiners
C. longitudinals
D. knees
[单项选择]The hull is divided up into a number of watertight compartments by().
A. inner bottom plating and longitudinals
B. decks and bulkheads
C. double bottom girders
D. topside and hopper tank sloping plating and longitudinals
[单项选择]To prevent a wooden hull from leaking you caulk it().
A. after drydocking,while the hull is moist
B. after drydocking,and the hull has dried
C. afloat,where it is leaking
D. afloat,in all accessible areas
[单项选择]The distance between the bottom of the hull and the waterline is called ().
A. tonnage
B. reserve buoyancy
C. draft
D. freeboard
[单项选择]Deck machinery, which is also known as hull machinery, includes all power driven equipment located ()the machinery spaces that is () with the main propulsion plant.
A. inside;associated
B. inside;not associated
C. outside;associated
D. outside;not associated
[单项选择]The two courses of action if the underwater hull of a ship is severely damaged are to plug the openings and to().
A. dewater the compartment
B. establish and maintain flooding boundaries
C. secure power to the compartment
D. counter flood to maintain even keel
[单项选择]Where a propeller shaft passes through the hull,water is prevented from entering by means of a().
A. stuffing box
B. propeller boss
C. seacock
D. stop-water