更多"Have you installed the new software"的相关试题:
[多项选择] A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）
A. You must set each end of the trunk line to IEEE 802.1e encapsulation.
B. You must set the same VTP management domain name on both switches.
C. You must set all ports on the two switches as access ports.
D. You must configure one of the switches as a VTP server.
E. You must use a rollover cable to connect the two switches.
[单项选择] You have just installed a new web server on the Testking network. You are required to ensure that the web server is accessible from the Internet. The network uses private addressing, so an IP-to-registered address mapping is required.To do this, you enter the following command:TestKing(config)# ip nat inside source static 192.168.2.1 198.18.1.254 You unsuccessfully try to ping the Internet from a PC host on the LAN. During the troubleshooting process, you enter the "show ip nat translations" command but the output is blank. What is the most likely cause of the problem?（）
A. The keyword overload is missing from the command.
B. The NAT pool must be defined first.
C. An access list must be defined to create static NAT translations.
D. The interfaces must be configured for NAT.
E. None of the above
[单项选择] A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）
A. The AS is not correctly configured
B. The network subnet mask is incorrectly configured
C. The network wildcard mask is configured incorrectly
D. The network number is not correctly configured
E. The process id is configured incorrectly
F. None of the above
[单项选择]（） you have entered your new office building, you probably would like to refurnish it.
A. Now that
B. So that
C. For
D. Because
[单项选择] On your newly installed router, you apply the access list illustrated below to interface Ethernet 0 on a Cisco router. The interface is connected to the 192.168.1.8/29 LAN. access-list 123 deny tcp 192.168.166.18 0.0.0.7 eq 20 any access-list 123 deny tcp 192.168.166.18 0.0.0.7 eq 21 any How will the above access lists affect traffic?（）
A. All traffic will be allowed to exit E0 except FTP traffic.
B. FTP traffic from 192.168.166.19 to any host will be denied.
C. FTP traffic from 192.168.166.22 to any host will be denied.
D. All traffic exiting E0 will be denied.
E. All FTP traffic to network 192.168.166.18/29 from any host will be denied.
[单项选择]You have just purchased a brand new router and wish to have the router prompt you through the initial configuration commands. Which router mode does this describe?（）
A. ROM Monitor mode
B. SETUP mode
C. Autoflash mode
D. RXBOOT mode
E. None of the above
[单项选择]You have not plugged up the drainage, have you?（）.
A. No, I have
B. Yes, I haven't
C. Yes, I have
D. No, I didn't
[单项选择]I hope you have a most happy and prosperous new year!（）
A. You are welcome!
B. How smart you are!
C. The same to you!
D. Nice going!
[单项选择]A software update was installed using the Apply option, however the update is no longer required. Which of the following procedures should be performed to remove the update?（）
A. Use the Reject option
B. Delete the update form the /usr/lpp directories
C. Use the Force Overwrite option to re-install the earlier version
D. Commit the update and then remove the updated product filesets using SMIT
[单项选择]A system administrator installed a new switch using a script to configure it. IP connectivity was tested using pings to SwitchB. Later attempts to access NewSwitch using Telnet from SwitchA failed. Which statement is true?（）
A. Executing password recovery is required.
B. The virtual terminal lines are misconfigured.
C. Use Telnet to connect to RouterA and then to NewSwitch to correct the error.
D. Power cycle of NewSwitch will return it to a default configuration.
[多项选择]A technician installed a new application on a Windows XP desktop. After the application wasinstalled, the technician rebooted the desktop and received a bluescreen error. Which of thefollowing steps should the technician perform?（） (Select TWO).
A. Boot into Safe Mode
B. Replace the motherboard
C. Uninstall the application
D. Replace the hard drive
E. Install more RAM
[单项选择]An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?（）
A. The NIC is not on the HCL.
B. The driver is incorrect on the server.
C. The patch cable has not been seated properly.
D. The NIC is not seated properly.
[单项选择]A technician has just installed a new power supply into a desktop computer and now the computer will not turn on. Which of the following is the MOST likely cause?（）
A. The voltage selector switch on the power supply is set incorrectly.
B. The 3.3v power line is connected to the wrong input on the motherboard.
C. The new power supply voltage rating is too high.
D. The 12v power cord is installed incorrectly.
[单项选择]A technician has installed a new motherboard in a workstation, but after hardware tests, themotherboard has failed. Which of the following should the technician do FIRST before replacingthe motherboard? （）
A. Reseat all power connections.
B. Remove the CMOS battery.
C. Install the graphics card.
D. Ground to the case.
[单项选择]Have you got（）lychees?
A. some
B. any
C. /
[单项选择]Recently three new applications were installed on all the desktops in a company branch. One of the applications causes Windows to crash on startup, but the technician is unable to find out which application it is. Without removing all three applications, which of the following is the BEST way to determine the cause of the crash?（）
A. Launch REGEDIT and remove the offending applications from the Run key.
B. Start the computer in Safe Mode and check Event Viewer.
C. Put in the ERD and when the window pops up select the option for Repair Broken Links and Applications.
D. Hit the F6 key as Windows loads and run Repair Broken Links and Applications.
[单项选择]Three access ports have been installed and configured to a small office.What term defines the wireless topology?（）
A. IBSS
B. BSS
C. ESS
D. SSID
