更多"What value is primarily used to det"的相关试题:
[单项选择]What value is primarily used to determine which port becomes the root port on each nonroot switch in a spanning-tree topology?（）
A. lowest port MAC address
B. port priority number and MAC address.
C. VTP revision number
D. highest port priority number.
E. path cost
[单项选择]Hydraulic control check value is generally used to （） in the marine hydraulic mechanism.
A. control the back pressure of return oil
B. lock the oil lines under some conditions
C. change the direction of oil flow
D. act as relief valve
[单项选择]A low pressure annular preventer which is used to direct flow of kick fluids away from the rig floor is called a （）.
A. dump valve
B. deflector
C. separator
D. diverter
[单项选择]Freon 12 which is used to produce intense cold is normally a （） when at atmospheric pressure and temperature.
A. liquid
B. gas
C. solid
D. water only
[单项选择]Check value is used to control （）
A. direction of oil flow
B. back pressure of return oil
C. bypass of filter
D. high pressure overflow
[单项选择]The ( ) process ascertains which risks have the potential of affecting the project and documenting the risks' characterist.
A. Risk Identification
B. Quantitative Risk Analysis
C. Qualitative Risk Analysis
D. Risk Monitoring and Control
[单项选择]Which interface is used for RTO synchronization and forwarding traffic between the devices in a cluster?（）
A. the st interface
B. the reth interface
C. the fxp1 and fxp0 interfaces
D. the fab0 and fab1 interfaces
[单项选择]Which message is used to transport routing information between BGP peers?（）
A. Open
B. Active
C. Update
D. Keepalive
[单项选择]Which protocol is used for communication between the Junos Pulse client and 802.1X-compliant switches when performing Layer 2 enforcement?（）
A. EAP
B. RADIUS
C. SSL
D. EAP-o-HTTP
[单项选择]Which command is used to initialize and configure a NIM master?（）
A. /usr/sbin/nim_init
B. /usr/bin/installnim
C. /usr/sbin/nimconfig
D. /usr/sbin/setup_server
[单项选择]which command is used to enable CHAP authentication whit PAP as the fallback method on a serial interface?（）
A. (config-if)#authentication ppp chap fallback ppp
B. (config-if)#authentication ppp chap pap
C. (config-if)#ppp authentication chap pap
D. (config-if)#ppp authentication chap fallback ppp
[单项选择]Which device is used in wireless networks to send transmissions to a target area?（）
A. Optical fiber
B. Access point
C. Directional antenna
D. Omni-directional antenna
