[单项选择]VLAN 3 is not yet configured on your switch.What happens if you set the switchport access vlan 3 commmand interface configuration mode?（）
A. The command is accepted and the respective VLAN is added to vlan dat.
B. The command is rejected.
C. The command is accepted and you must configure the VLAN manually.
D. The port turns amber.

[单项选择]VLAN 3 is not yet configured on your switch.What happens if you set the switchport access vlan 3 commmand interface configuration mode?（）
A. The command is accepted and the respective VLAN is added to vlan dat.
B. The command is rejected.
C. The command is accepted and you must configure the VLAN manually.
D. The port turns amber.

[单项选择]VLAN 3 is not yet configured on your switch. What happens if you set the switchport access vlan3 commmand interface configuration mode？（）
A. The command is accepted and the respective VLAN is added to vlan dat.
B. The command is rejected.
C. The command is accepted and you must configure the VLAN manually.
D. The port turns amber.

[单项选择]Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）
A. Reverse ARP
B. Full duplex on the fiber link
C. PoE
D. 802.1q trunking

[单项选择]You have configured your chassis cluster to include redundancy group 1. Node 0 is configured to be the primary node for this redundancy group. You need to verify that the redundancy group failover is successful.Which command do you use to manually test the failover?（）
A. request chassis cluster manual failover group 1 node 1
B. request cluster failover redundancy-group 1 node 1
C. request chassis cluster manual failover redundancy-group 1 node 1
D. request chassis cluster failover redundancy-group 1 node 1

[多项选择]You need to create a new VLAN on your Catalyst switch. This VLAN is to be named TESTKING. Which of the following need to be completed for the creation of this new VLAN?（）
A. The TESTKING VLAN must be created.
B. The desired ports must be added to the new TESTKING VLAN.
C. The TESTKING VLAN must be added to all of the domains.
D. The TESTKING VLAN must be named.
E. An IP address must be configured for the TESTKING VLAN.
F. None of the above. VLAN creations are automatic.

[名词解释]VLAN

[单项选择]You have configured Junos Pulse on your Windows desktop and want to verify that the IPsec configuration policy is being pushed down to your workstation upon network authentication and login.Which utility program do you use to see this configuration and where do you find it?（）
A. the Pulse Diagnostics Tool in the "File" > "Tools" menu option in the Pulse GUI
B. the Pulse Diagnostics Tool in the "Start" > "All Programs" > "Juniper Networks" > "Junos Pulse" menu folder next to the Junos Pulse application
C. the Pulse Diagnostics Viewer, which you access by simultaneously pressing "Ctrl" and "F2"
D. the Pulse Diagnostics Viewer in the "File" > "Tools" menu option in the Pulse GUI

[多项选择] You have configured voice VLANs on Catalyst switch R1.  Which two statements are true about the  operation of voice VLANs on this device？ （）
A.  When the voice VLAN feature is enabled， all untagged traffic is sent according to the default  CoS priority of the port.
B.  Enabling voice VLANs enables the switch to create multiple queues for traffic that is entering a  port.
C.  When voice VLANs are configured on a trunk link， UplinkFast must also be enabled.
D.  Voice VLANs are configured to enable the switch to forward frames marked with the proper  CoS values over separate physical links.
E.  Enabling voice VLANs enables the switch to forward frames with a specific 802.1P marking.

[单项选择] VLAN maps have been configured on switch R1.  Which of the following actions are taken in a  VLAN map that does not contain a match clause？  （）
A.  Implicit deny feature at end of list.
B.  Implicit deny feature at start of list.
C.  Implicit forward feature at end of list
D.  Implicit forward feature at start of list.

[单项选择]Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console？（）
A. From the Static Routes node, configure a static route.
B. From the server properties, configure SSL Certificate Binding.
C. From the NAT interface, add an address pool and a reservation.
D. From the NAT interface, configure the Secure Web Server (HTTPS) service.

[单项选择] Your database has the SRV1 service configured for an application that runs on middle-tier application server. The application has multiple modules. You enable tracing at the service level by executing the following command: SQL > exec DBMS_MONITOR.SERV_MOD_ACT_TRACE_ENABLE (‘SRV1’); The possible outcome and actions to aggregate the trace files are as follows: 1. The command fails because a module name is not specified. 2. A trace file is created for each session that is running the SRV1 service. 3. An aggregated trace file is created for all the sessions that are running the SRV1 service. 4. The trace files may be aggregated by using the trcess utility. 5. The trace files be aggregated by using the tkprof utility. Identify the correct outcome and the step to aggregate by using tkprof utility?（）
A. 1
B. 2 and 4
C. 2 and 5
D. 3 and 4
E. 3 and 5

[单项选择] You have configured your database to use RMAN for backup and recovery. You must back up the datafile contained in the TS1 tablespace. The size of the datafile in the TS1 tablespace is 200 MB.  You issue the following command from the RMAN prompt to perform a backup of the tablespace：   RMAN> BACKUP TABLESPACE TS1 MAXSETSIZE 100M；  Which statement is true about executing this command？（）
A.  The command generates an error.
B.  The command backs up the tablespace and creates a backup set of size 200 MB
C.  The command backs up the tablespace and creates two backup sets of size 100 MB each.
D.  The command backs up the tablespace and creates a backup set with backup pieces of size 100 MB each.

[单项选择] Your company h as an Active Directory Domain Services (AD DS) domain. All client computers run Windows 7. You are deploying Microsoft Enterprise Desktop Virtualization (MED - V) virtual machines (VMs) on several client computers. You need to ensure that names of the new VM s follow a naming convention. What should you do?（）
A. In the MED - V Management console, configure the Image Update Settings.
B. In the MED - V Management console, add a script action and set the VM computer name pattern.
C. In the MED - V Management console, config ure the deployment options.
D. In the VM, run the System Preparation Tool (Sysprep) and choose to start the factory session after rebooting.

[单项选择]--Have you finished writing your report yet --No, I'll finish it in ______ ten minutes.

[判断题]VLAN按照创建的方法可以分为静态VLAN和动态VLAN

[单项选择]W: Have you found your book yet M:______