题目详情
当前位置:首页 > 职业培训考试
题目详情:
发布时间:2023-11-15 12:42:00

[多项选择]Which two statements are characteristics of a distance vector routing protocol?()
A. RIP is an example of distance vector routing protocols
B. Updates are periodic and include the entire routing table
C. Routing updates are sent only after topology changes
D. The protocol can be useful in hub-and-spoke and hierarchical networks
E. Convergence is usually faster than with link state protocols
F. Each router has its own view of the topology

更多"Which two statements are characteri"的相关试题:

[多项选择]Which two statements are characteristics of a distance vector routing protocol?()
A. RIP is an example of distance vector routing protocols.
B. Updates are periodic and include the entire routing table.
C. Routing updates are sent only after topology changes
D. The protocol can be useful in hub-and-spoke and hierarchical networks.
E. Convergence is usually faster than with link state protocols
F. Each router has its own view of the topology
[多项选择]Which two statements describe characteristics of IPv6 unicast addressing?()
A. Global addresses start with 2000::/3.
B. Link-local addresses start with FE00:/12.
C. Link-local addresses start with FF00::/10.
D. There is only one loopback address and it is ::1.
E. If a global address is assigned to an interface, then that is the only allowable address for the interface.
[多项选择]Which statements describe two of the benefits of VLAN Trunking Protocol?()
A. VTP allows routing between VLANs.
B. VTP allows a single switch port to carry information to more than one VLAN.
C. VTP allows physically redundant links while preventing switching loops.
D. VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.
E. VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.
F. VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.
[多项选择]Which three statements are typical characteristics of VLAN arrangements?()
A. A new switch has no VLANs configured.
B. Connectivity between VLANs requires a Layer 3 device.
C. VLANs typically decrease the number of collision domains.
D. Each VLAN uses a separate address space.
E. A switch maintains a separate bridging table for each VLAN.
F. VLANs cannot span multiple switches.
[多项选择]Which two statements regarding external authentication servers for firewall user authentication are true?() (Choose two.)
A. Up to three external authentication server types can be used simultaneously.
B. Only one external authentication server type can be used simultaneously.
C. If the local password database is not configured in the authentication order, and the configured authentication server  bypassed.
D. If the local password database is not configured in the authentication order, and the configured authentication server authentication is rejected.
[多项选择]Which two statements regarding JUNOS architecture are correct?()
A. The Routing Engine handles all exception traffic.
B. The Routing Engine synchronizes the route table with the PFE
C. The Routing Engine is hot-pluggable.
D. The Routing Engine controls the PFE
[多项选择]Which two statements correctly identify considerations to take into account when deciding on Campus QoS Design elements?()
A. Voice needs to be assigned to the hardware priority queue.
B. Voice needs to be assigned to the software priority queue.
C. Call signaling must have guaranteed bandwidth service.
D. Strict-priority queuing should be limited to 50 percent of the capacity of the link.
E. At least 33 percent of the link bandwidth should be reserved for default best-effort class.
[多项选择]Which two statements describe the forwarding table in the Junos OS?()
A. The forwarding table contains all known routes.
B. The forwarding table stores a subset of information from the routing table.
C. Junos devices use the forwarding table to compare incoming packets against existing entries to determine the next hop.
D. If multiple matches exist, the forwarding table uses the least-specific entry to forward packets toward the destination.
[多项选择]Which two statements are correct regarding default protocol preference values?()
A. OSPF internal routes have a lower preference than static routes.
B. Both direct and local routes have the same preference value.
C. OSPF's preference value is lower than BGP.
D. OSPF has a single preference value for both internal and external routes.
[多项选择]Which two statements describe the criteria bandwidth detection uses to dynamically alter bandwidth allocation?()(Choose two.)
A. Throughput is raised as latency decreases.
B. Throughput is based on available bandwidth.
C. Throughput is lowered as latency decreases.
D. Latency is measured by SYNs returned for each metapacket.
[多项选择]Which two statements about creating constraints are true?()
A. Constraint names must start with SYS_C
B. All constraints must be defines at the column level
C. Constraints can be created after the table is created
D. Constraints can be created at the same time the table is created
E. Information about constraints is found in the VIEW_CONSTRAINTS dictionary view
[多项选择]Which two statements are true regarding interface properties? ()
A. MTU and speed must be configured under each unit.
B. Physical parameters such as MTU, duplex mode, and speed are configured under the interface name.
C. IP and IPv6 addresses are configured under a unit-number.
D. DLCI numbers, VPI/VCI values, and VLAN tags are physical parameters.
[多项选择]Which two statements accurately describe a broadcast domain?()
A. Broadcast domains consist of devices that connect to a common switch or hub.
B. Broadcast domains consist of a group of devices that can be reached by sending a frame addressed to the Layer 2 broadcast address.
C. Broadcast domains require a gateway device such as a router.
D. Broadcast domains consist of devices that reside on the same sub-network.
[多项选择]Which two statements are true regarding ownership of shared entities? ()(Choose two.)
A. Customers is owned by Oracle Human Resources whereas Locations is owned by Oracle Receivables.
B. Items is owned by Oracle Purchasing whereas Locations is owned by Oracle Receivables.
C. Sales Force is owned by Oracle Order Management whereas Employees is owned by Oracle Human Resources.
D. Set of books is owned by Oracle General Ledger whereas Locations is owned by Oracle Human Resources.
E. Suppliers is owned by Oracle Purchasing whereas Units of Measure is owned by Oracle Inventory.

我来回答:

购买搜题卡查看答案
[会员特权] 开通VIP, 查看 全部题目答案
[会员特权] 享免全部广告特权
推荐91天
¥36.8
¥80元
31天
¥20.8
¥40元
365天
¥88.8
¥188元
请选择支付方式
  • 微信支付
  • 支付宝支付
点击支付即表示同意并接受了《购买须知》
立即支付 系统将自动为您注册账号
请使用微信扫码支付

订单号:

请不要关闭本页面,支付完成后请点击【支付完成】按钮
恭喜您,购买搜题卡成功
重要提示:请拍照或截图保存账号密码!
我要搜题网官网:https://www.woyaosouti.com
我已记住账号密码