更多"在配EIGRP的时候（frame-relay的NBMA）命令route"的相关试题:
[单项选择]A router has EIGRP configured as the only routing protocol. How does EIGRP respond if there is no feasible successor route to a destination network and the successor route fails?（）
A. It immediately sends its entire routing table to its neighbors.
B. EIGRP sends a Hello packet to the DR to inform it of the route failure.
C. It automatically forwards traffic to a fallback default route until a successor route is found.
D. It sends queries out to neighbors until a new successor route is found.
E. It places the route in holddown until LSA updates inform it of a new route to the network.
[单项选择]Which command displays EIGRP-related router activities as they occur?（）
A. TestKing# show ip route *
B. TestKing# debug eigrp route
C. TestKing# debug ip eigrp
D. TestKing# debug ip protocols eigrp
E. TestKing# show ip route eigrp
[单项选择]The EIGRP configuration in the Glencoe router uses a single network statement.From the output shown in the graph would advertise these networks in EIGRP?（）
A. network 172.26.168.0 area 478
B. network 172.26.0.0
C. network 172.26.168.128 0.0.0.127
D. network 172.26.168.128 area 478
[多项选择] On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH. Which of the following co mmands on router R1 list subnet 10.1.1.0/24?（）
A. show ip route
B. show ip eigrp topology
C. show ip ospf topology
D. show ip eigrp topology 10.1.1.0/24
[单项选择]What does a router do if it has no EIGRP feasible successor route to a destination network and the successor route to that destination network is inactive status?（）
A. It routes all traffic that is addresses to the destination network to the interface indicates in the routing table.
B. It sends a copy of its neighbor table to all adjacent routers.
C. It sends a multicast query packet to all adjacent neighbors requesting available routing paths to the destination network.
D. It broadcasts Hello packets to all routers in the network to re-establish neighbor adjacencies.
[单项选择] Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）
A. R1 has been configured with an ip default- network 2.0.0.0 command.
B. R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.
C. R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
D. Another router has been configured with an ip default - network 2.0.0.0 command.
E. Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
[单项选择]A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。
A. The router will use the static route.
B. The router will use the OSPF route.
C. The router will use the EIGRP route.
D. The router will load balance and use all three routes.
[单项选择] The output of s how ip eigrp topology on Router R1 shows the following output, which is all the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24?（） P 10.11.1.0/24, 2 successors, FD is 2172419 via 10.1.1.2 (2172423/2 8167), Serial0/0/0.1 via 10.1.1.6 (2172423/28167), Serial0/0/0.2
A. 0
B. 1
C. 2
D. 3
[多项选择] Router R1 has been configured for EIGRP. The configuratio n also includes an ACL with one line -access - list 1 permit 10.100.32.0 0.0.15.255 - and the EIGRP configuration includes the distribute -list 1 in command. Which of the following routes could not be displayed in the output of the show ip eigrp topology comm and as a result?（）
A. 10.10.32.0/19
B. 10.10.44.0/22
C. 10.10.40.96/27
D. 10.10.48.0/23
E. 10.10.60.0/30
[单项选择]A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）
A. The router will use the static route.
B. The router will use the OSPF route.
C. The route will use the EIGRP route.
D. The router will load balance and use all three routes.
[判断题]在NBMA中可以使用PIM-SM 路由协议。
[判断题]在运行OSPF协议的广播网络和NBMA网络中需要选举出一个DR。
[单项选择]立即指配命令在（）信道下发给MS。
A. PCH
B. BCCH
C. AGCH
[判断题]静态MPLS（StaticMPLS）不使用信令协议进行参数协商，不依赖于控制平面，而是通过命令手工配置LSP和PW。
[单项选择]对于NBMA（非广播多点可达Non-Broadcast Multi-Access）接口，若封装X.25或帧中继协议后，除了要配置IP路由外，还需要建立链路层“二次路由”，即建立从IP地址到链路层地址的映射。这种情况下，以下说法正确的是 （）
A. 配置静态路由时就不能指定发送接口，而必须指定下一跳的IP地址
B. 配置静态路由时可以指定发送接口，也可以指定下一跳的IP地址
C. 必须运行动态路由协议
D. 接口速度要达到64K以上
[判断题]BGP 的网络类型也分为点到点，点到多点和NBMA 。
[单项选择]在NBMA 网络上运行组播，应该注意什么（）
A. 与普通网络相同，没什么需要特别注意的
B. 需要运行PIM DM 路由协议，记录邻居的IP地址
C. 需要运行PIM SM 协议，记录邻居的IP地址
D. PIM DM/SM 都可以
[单项选择]要给自定义动画配上声音，应使用（）命令来实现。
A. 单击开始
B. 现实高级日程表
C. 计时
D. 效果选项
