更多"Router R1 has been configured for E"的相关试题:
[单项选择] Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）
A. Subnet number
B. Next - hop router IP address of the route
C. Whether the route is an E1 or E2 route
D. The ro ute's tag
E. The number of router hops between the router and the subnet
[单项选择] Router R1 has been configured with the commands rout er eigrp 9 and network 172.16.2.0 0.0.0.255, with no other current EIGRP configuration. R1's (working) Fa0/0 interface has been configured with IP address 172.16.2.2/26. R1 has found three EIGRP neighbors reachable via interface Fa0/0, including the rou ter with IP address 172.16.2.20. When the engineer attempts to add the neighbor 172.16.2.20 fa0/0 command in EIGRP configuration mode. Which of the following occurs？（）
A. Fa0/0 fails
B. The command is rejecteD
C. The existing three neighbors fail
D. The neighborship with 172.16.2.20 fails and then reestablishes
E. None of the other answers is correct
[单项选择] A router has been configured with the authentication order settings shown below: [edit] user@host# show system authentication-order authentication-order [radius tacplus password]; The router also has a local database that contains the user lab with password lab123. What would happen if both the RADIUS and the TACACS servers respond with a reject for user lab?（）
A. The user lab will not be able to login.
B. The user lab will be authenticated against the local database and will be able to login.
C. The user will be able to login only if tries to login as the root user.
D. The user lab will receive an error message indicating the username and password provided could not be found on the radius and tacacs servers.
[单项选择] A router has been configured with the settings shown below: [edit] user@host# show system authentication-order authentication-order [ radius tacplus ]; The router also has a local database that contains the user lab with password lab123. What would happen if both the RADIUS and the TACACS servers are not accessible?（）
A. The user lab will not be able to login.
B. The user lab will be authenticated against the local database and will be able to login.
C. The user lab will receive an error message indicating the router is unable to authenticate due to the authentication servers not responding.
D. The user will be able to login only if tries to login as the root user.
[多项选择] A router has been configured with the commands router eigrp 9 and network 72.16.1.0 0.0.0.255. No other EIGRP - related commands have been configured. The nswers list the IP addresses that could be assigned to this router's Fa0/0 interface. Which answers list an IP address/prefix length that would cause the router to enable IGRP on Fa0/0?（）
A. 172.16.0.1/23
B. 172.16.1.1/26
C. 172.16.1.1/24
D. 172 .16.0.255/23
E. None of the other answers is correct.
[单项选择]A Cisco router has been configured with the following command:IP nat pool nat-test 192.168.6.10 192.168.6.20 netmask 255.255.255.0his is an example of what type of NAT?（）
A. Static NAT
B. Dynamic NAT
C. Dynamic NAT with overload
D. Port Address Translation
E. None of the above
[单项选择] A Cisco router has been configured, and the copy running-config startup-config command has been issued. When the router is power cycled, the router prompts with: "Would you like to enter the initial configuration dialog? [yes/no]" Why has this occurred?（）
A. There is an error in the router DRAM.
B. Te IOS image is corrupt.
C. The configuration register is set to 0x2142.
D. The TFTP server that contains the router configuration file is unreachable.
E. A boot system configuration command has placed the router into setup mode.
[多项选择] Router R1 is configured as shown below: router eigrp 100 network 10.0.0.0 eigrp stub Based on the information shown above, which two types of routes will be advertised？（）
A. Receive - only
B. Stub
C. Static
D. Summary
E. Connected
F. Dynamic
[多项选择] You have configured router R1 with HSRP， using the standard defaults. Which three statements are true of a default HSRP configuration？（）
A. The Standby hello time is 2 seconds.
B. Two HSRP groups are configured.
C. The Standby track interface priority is 10.
D. The Standby hold time is 10 seconds
E. The Standby priority is 100.
F. The Standby delay is 3 seconds.
[多项选择] Router R1 is configured for HSRP. Which of the following are valid HSRP states on R1？ （）
A. Init
B. Idle
C. Active
D. Standby
E. Established
F. Backup
[单项选择]A router has EIGRP configured as the only routing protocol. How does EIGRP respond if there is no feasible successor route to a destination network and the successor route fails?（）
A. It immediately sends its entire routing table to its neighbors.
B. EIGRP sends a Hello packet to the DR to inform it of the route failure.
C. It automatically forwards traffic to a fallback default route until a successor route is found.
D. It sends queries out to neighbors until a new successor route is found.
E. It places the route in holddown until LSA updates inform it of a new route to the network.
[多项选择] Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result？（）
A. R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
B. R1 can send IP packets to R2, but R2 cannot send IP packets to R1
C. R2 no longer learns EIGRP routes from R1 for routes not connected to R1
D. R1 no longer replies to R2's Query messages
E. R2n o longer sends to R1 Query messages
[单项选择]ABR R1 has been configured with an area 1 stub no - summary command. Which stubby area type is area 1?（）
A. Stub
B. Totally stubby
C. NSSA
D. Totally NSSA
[单项选择] BGP route dampening is configured on a BGP router. Whose routing behavior is affected by this configuration?（）
A. upstream EBGP neighbors
B. downstream EBGP neighbors
C. upstream IBGP neighbors learned by IBGP peers
D. downstream IBGP neighbors learned by IBGP peers
[单项选择]Router R1 has been conf igured with an ipv6 route 2000::/64 S0/0/0 64 command.Which of the following does the 64 at the end of the command represent?（）
A. Metric
B. Administrative distance
C. Timeout (seconds)
D. Prefix length
E. Interface ID
[多项选择] The TestKingA router is configured as shown below: TestKingA(config)# interface loopback 0 TestKingA(config-if)# ip address 192.168.16.24 255.255.255.255 As a result of this change, which of the statements below are true?（）
A. It creates a virtual, software only, interface.
B. It provides a way to test the convergence of OSPF routing updates.
C. The mask of 255.255.255.255 is called a host mask.
D. It uses a wildcard mask of 255.255.255.255.
E. It ensures that an interface is always active for OSPF processes.
F. Loopback interfaces must be numbered 0.
[单项选择]The ERX Edge Router is configured for PPP over Ethernet without using VLAN tagging. How many PPP over Ethernet major interfaces can be configured per port?（）
A. 1
B. 100
C. 2048
D. 4096
[单项选择]A BGP router is configured with bgp dampening 8 300 1500 20 route-map 1 .What does the value of 20 represent?（）
A. reuse
B. suppress
C. half-life
D. max-suppress-time
