更多"Router R1 has been conf igured with"的相关试题:
[单项选择]Your company has an ipv6 network that has 25 segments. You deploy a server on the ipv6 network. You need to ensure that the server can communicate with all segments on the IPv6 network. What should you do?（）
A. ConfiguretheIPv6addressasfd00：：2b0：d0ff：fee9：4143/8
B. ConfiguretheIPv6addressasfe80：：2b0：d0ff：fee9：4143/64
C. ConfiguretheIPv6addressasff80：：2b0：d0ff：fee9：4143/64
D. ConfiguretheIPv6addressas0000：：2b0：d0ff：fee9：4143/64
[单项选择]Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.You need to ensure that the server can communicate with all segments on the IPv6 network.What should you do？（）
A. Configure the IPv6 address as fd00：：2b0：d0ff：fee9：4143/8.
B. Configure the IPv6 address as fe80：：2b0：d0ff：fee9：4143/64.
C. Configure the IPv6 address as ff80：：2b0：d0ff：fee9：4143/64.
D. Configure the IPv6 address as 0000：：2b0：d0ff：fee9：4143/64.
[单项选择] A Catalyst switch has just been installed and configured, and is not working as expected. You have decided to capture multiple show command outputs to study. Which one command could you use that includes the output of many other show commands, such as show version and show running-config?（）
A. show configuration
B. show memory
C. show stacks
D. show tech-support
[单项选择]Historically, Ireland has been free of ethnic conflicts because of its ______.
A. racial unity
B. racial homogeneity
C. multi-culturalism
D. high rate of emigration
[单项选择]After the show ip route command has been entered, the following routes are displayed. Which route will not be entered into the routing table of a neighboring router?（）
A. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
B. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C. C 192.168.1.0/24 is directly connected, Ethernet0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
[多项选择] Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result？（）
A. R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
B. R1 can send IP packets to R2, but R2 cannot send IP packets to R1
C. R2 no longer learns EIGRP routes from R1 for routes not connected to R1
D. R1 no longer replies to R2's Query messages
E. R2n o longer sends to R1 Query messages
[单项选择] Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）
A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.
B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.
C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.
D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.
[单项选择]After the show ip route command has been entered,the follwing routes are displayed.Which route will not be entered into the routing table of a neighboring router?（）
A. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
B. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C. C 192.168.1.0/24 is directly connected, Ethernet 0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2,00:00:10,Serial0
[单项选择]Route redistribution (RR) has become an integral part of IP network design as the res ult of a growing need for disseminating certain routes across routing protocol boundaries. By default, which description is true when redistributing routes from other routing protocols into OSPF?（）
A. Summarized routes are unacceptable
B. They will appe ar in the OSPF routing table as type E2 routes
C. Only routes with lower administrative distances will be imported
D. All imported routes are to be automatically summarized if possible
[单项选择]ABR R1 has been configured with an area 1 stub no - summary command. Which stubby area type is area 1?（）
A. Stub
B. Totally stubby
C. NSSA
D. Totally NSSA
[多项选择]Your Company has migrated to IPv6 in their network. Which three IPv6 notations represent the same address?（）
A. 2031::130F::9C0:876A:130B
B. 2031:0000:130F:0000:0000:09C0:876A:130 B
C. 2031:0:130F:::9C0:876A:130B
D. 2031::130F:0::9C0:876A:130B
E. 2031:0:130F:0:0:09C0:876A:130B
F. 2031:0:130F::9C0:876A:130B
[单项选择] An enterprise has plans to start adding IPv6 support. The initial deployment requires support from some IPv6 - only device s that need to access servers that support only IPv4. Which of the following tools would be most appropriate?（）
A. Native IPv6
B. Point - to -point tunnels
C. Multipoint tunnels
D. NAT - PT
[单项选择] Router R1 has been configured with the redistribute ospf 1 route - map fred command under router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP. Which of the following answers lists an item that cannot be matched by route map fred?（）
A. Subnet number
B. Next - hop router IP address of the route
C. Whether the route is an E1 or E2 route
D. The ro ute's tag
E. The number of router hops between the router and the subnet
[单项选择] Router R1 has been configured with the commands rout er eigrp 9 and network 172.16.2.0 0.0.0.255, with no other current EIGRP configuration. R1's (working) Fa0/0 interface has been configured with IP address 172.16.2.2/26. R1 has found three EIGRP neighbors reachable via interface Fa0/0, including the rou ter with IP address 172.16.2.20. When the engineer attempts to add the neighbor 172.16.2.20 fa0/0 command in EIGRP configuration mode. Which of the following occurs？（）
A. Fa0/0 fails
B. The command is rejecteD
C. The existing three neighbors fail
D. The neighborship with 172.16.2.20 fails and then reestablishes
E. None of the other answers is correct
[单项选择]Which IPv6 address correctly compresses the IPv6 unicast address 2001:0:0:0:0DB8:0:0:417A?（）
A. 2001:0DB8:417A
B. 2001::0DB8::417A
C. 2001:::0DB8::417A
D. 2001:0D B8:0:0:417A
E. 2001::DB8:0:0:417A
F. 2001:::0DB8:0:0:417A
[多项选择] Router R1 has been configured for EIGRP. The configuratio n also includes an ACL with one line -access - list 1 permit 10.100.32.0 0.0.15.255 - and the EIGRP configuration includes the distribute -list 1 in command. Which of the following routes could not be displayed in the output of the show ip eigrp topology comm and as a result?（）
A. 10.10.32.0/19
B. 10.10.44.0/22
C. 10.10.40.96/27
D. 10.10.48.0/23
E. 10.10.60.0/30
[多项选择] In IPv6 network, an IPv6 overlay tunnel is required to communicate with isolated IPv6 networks across the existing IPv4 infrastructurE. There are currently fiv e IPv6 overlay tunnel types. Which three IPv6 overlay tunnel statements are true？（）
A. Overlay tunnels can only be configured between border routers capable of supporting IPv4 and IPv6.
B. An manual overlay tunnel supports point - to - multipo int tunnels capable of carrying IPv6 and Connectionless Network Service (CLNS) packets.
C. Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure.
D. Overlay tunnels can be configured between border route rs or between a border router and a host capable of supporting IPv4 and IPv6.
E. Cisco IOS supports manual, generic routing encapsulation (GRE), IPv4 - compatible, 6to4, and Intra - Site Automatic Tunnel Addressing Protocol (ISATAP) overlay tunneling mechan isms.
F. Cisco IOS supports manual, generic routing encapsulation (GRE), IPv6 - compatible, 4to6, and Multiprotocol Label Switching (MPLS) overlay tunneling mechanisms.
