更多"Which is the correct fallback seque"的相关试题:
[单项选择]Which sequence is correct when launching a lifeboat stowed in gravity davits?（）
A. Release gripes，turn on emergency disconnect switch，release frapping lines
B. Release tricing pennants，turn on emergency disconnect switch，release frapping lines
C. Operate limit switches，release gripes，lift brake
D. Release gripes，lift brake，release tricing pennants
[单项选择]What is the correct sequence of commands to configure and verify SRM with SSO redundancy? （）
A. mode sso, redundancy, show redundancy states
B. show redundancy states, mode sso, redundancy
C. redundancy, mode sso, show redundancy states
D. show redundancy states, redundancy, mode sso
[单项选择]Which sequence of messages demonstrates the communications between the LAC and LNS when theyestablish an L2TP session?（）
A. Incoming Call Reply, Incoming Call Request, Incoming Call Connected
B. Incoming Call Reply, Incoming Call Connected, Incoming Call Request
C. Incoming Call Request, Incoming Call Reply, Incoming Call Connected
D. Incoming Call Request, Incoming Call Connected, Incoming Call Reply
[单项选择]Which command sequence displays queue statistics for an interface?（）
A. monitor interface ge-0/0/0 queue
B. show interfaces queue ge-0/0/0
C. show interfaces ge-0/0/0 statistics extensive
D. show statistics queue detail
[单项选择]Which configuration shows the correct application of a security policy scheduler?（）
A. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } scheduler-name now; } } }
B. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }
C. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn scheduler-name now; } } } }
D. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; scheduler-name now; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }myTunnel;
[单项选择]Which of the following is correct
A. The thirty-foot-long pipe was not a straight one.
B. There were no big bends in the solid stone.
C. Solid stone had to be put into the pipe.
D. In one place the workmen had to put big bends into some new wiring.
[单项选择]Which command sequence shows traffic per queue for an interface?（）
A. show interfaces queue ge-0/0/0
B. show statistics queue detail
C. show interfaces ge-0/0/0 statistics extensive
D. monitor interface ge-0/0/0 queue
[单项选择]Which of the following sequence of command extracts the tenth image form a tape in tape device rmt1?（）
A. tet1 -f /dev/rmt1.0 fsf 9; tar -xv file 10
B. tet1 -f /dev/rmt1.1 fsf 10; tar -xv file 10
C. tet1 -f /dev/rmt1.1 fsf 9; dd if = /dev/rmt1.1 of=file 10
D. tet1 -f /dev/rmt1.0 fsf 9; dd if =file10 of /dev/rmt1.0
[单项选择]Which of the following sequence of commands should be used to list the directories and files saved on a mksyst tape that has been rewound and placed in device rmt0?（）
A. tet1 -f /dev/rmt0 fsf 2; restore -xqvf /dev/rmt0
B. tet1 -f /dev/rmt0.1 fsf2; restore -Tvf /dev/rmt0.1
C. tet1 -f /dev/rmt0.1 fsf3; restore Tqvf /dev/rmt0.1
D. tet1 -f /dev/rmt0.1 fsf3; restore -Tvf /dev/rmt0.1
[单项选择]Which of the following sequence of commands extracts the third image from a tape that was created using the backup command?（）
A. tctl -f /dev/rmt0.1 fsf 2 ; tar -xv file3
B. tctl -f /dev/rmt0.0 fsf 3 ; dd if=file3 pf =/dev/mt0.1
C. tctl -f /dev/rmt0.1 fsf 2 ; dd if=/dev/rmt0.1 of=file3
D. tctl -f /dev/rmt0.0 fsf 3 ; dd if=/dev/rmt0.1 of=file3
[单项选择]Which statement is correct regarding exception traffic processing?（）
A. Exception traffic is only handled by the PFE
B. Exception traffic is rate-limited across the internal link to protect the RE
C. Exception traffic is not prioritized during times of congestion
D. Exception traffic is forwarded based on forwarding table entries
[单项选择]Which statement is correct regarding the operation of DHCP?（）
A. A DHCP client uses a ping to detect address conflicts.
B. A DHCP server uses a gratuitous ARP to detect DHCP clients.
C. A DHCP client uses a gratuitous ARP to detect a DHCP server.
D. If an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict.
E. If an address conflict is detected, the address removed from the pool for an amount of time configurable by the administrator.
F. If an address conflict is detected, the address is removed from the pool and will not be reused until server is rebooted.
[多项选择]Which two statements are correct regarding default protocol preference values?（）
A. OSPF internal routes have a lower preference than static routes.
B. Both direct and local routes have the same preference value.
C. OSPF's preference value is lower than BGP.
D. OSPF has a single preference value for both internal and external routes.
[单项选择]Which statement contains the correct parameters for a route-based IPsec VPN?（）
A. [edit security ipsec] user@host# show proposal ike1-proposal { protocol esp; authentication-algorithm hmac-md5-96; encryption-algorithm 3des-cbc; lifetime-seconds 3200; }policy ipsec1-policy { perfect-forward-secrecy { keys group2; } proposals ike1-proposal; } vpn VpnTunnel { interface ge-0/0/1.0; ike { gateway ike1-gateway; ipsec-policy ipsec1-policy; } establish-tunnels immediately; }
B. [edit security ipsec] user@host# show proposal ike1-proposal { protocol esp; authentication-algorithm hmac-md5-96; encryption-algorithm 3des-cbc; lifetime-seconds 3200; } policy ipsec1-policy { perfect-forward-secrecy { keys group2; } proposals ike1-proposal; } vpn VpnTunnel { interface st0.0; ike { gateway ike1-gateway; ipsec-policy ipsec1-policy; } establish-tunnels immediately; }
C. [edit security ipsec] user@host# show proposal ike1-proposal { protocol esp; authentication-algorithm hmac-md5-96; encryption-algorithm 3des-cbc; lifetime-seconds 3200;} policy ipsec1-policy { perfect-forward-secrecy { keys group2; } proposals ike1-proposal; } vpn VpnTunnel { bind-interface ge-0/0/1.0; ike { gateway ike1-gateway; ipsec-policy ipsec1-policy; } establish-tunnels immediately; }
D. [edit security ipsec] user@host# show proposal ike1-proposal { protocol esp; authentication-algorithm hmac-md5-96; encryption-algorithm 3des-cbc; lifetime-seconds 3200; }policy ipsec1-policy { perfect-forward-secrecy { keys group2; } proposals ike1-proposal; } vpn VpnTunnel { bind-interface st0.0; ike { gateway ike1-gateway; ipsec-policy ipsec1-policy; } establish-tunnels immediately; }
