[单项选择]Which configuration shows the correct application of a security policy scheduler?（）
A. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } scheduler-name now; } } }
B. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }
C. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn scheduler-name now; } } } }
D. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; scheduler-name now; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }myTunnel;

更多"Which configuration shows the corre"的相关试题:

[单项选择]Which configuration is correct for a DHCP Relay Proxy?（）
A. set dhcp relay 1.1.1.1 set dhcp relay 2.2.2.2 set dhcp relay
B. set dhcp relay proxy set dhcp relay 1.1.1.1 set dhcp relay 2.2.2.2
C. set dhcp relay 1.1.1.1 proxy set dhcp relay 2.2.2.2
D. set dhcp relay 1.1.1.1 set dhcp relay 2.2.2.2 proxy

查看答案

[单项选择]Which method loads the configuration which was active before your last commit?（）
A. load replace last-active
B. load rollback 1
C. rollback 1
D. rollback last-active

查看答案

[单项选择]Given the following LSP configuration, which statement is true?（）label-switched-path lsp-xyz { to 10.200.1.1; primary path1; secondary path2; secondary path3; no-cspf; } path path1 { 10.200.10.1 strict; } path path2 { 10.200.20.1 strict; } path path3 { 10.200.30.1 loose; }
A. The router will use path1 when it is available and stable.
B. The router will use path3 when it is available and stable.
C. The router will attempt to establish path2 only when path1 and path3 are down.
D. The router will attempt to establish path1 only when path2 and path3 are down.

查看答案

[单项选择]Assuming the default switch configuration,which approach should you use to configure the extended vlan range(1006 through 4094) on a cisco catalyst 3750 series switch?（）
A. Configure the switch to be in VTP client mode.
B. Configure the switch to be in VTP domaint mode.
C. Configure the switch to be in VTP transparent mode.
D. Configure the switch to be in VTPv2.

查看答案

[单项选择] What is correct regarding the configuration shown below?（）（1）static route 0.0.0.0/0 （2）qualified-next-hop 172.30.25.1 preference 7 （3）next-hop 172.30.25.5
A. The next-hop 172.30.25.1 is selected because the address has the lowest value.
B. The next-hop 172.30.25.1 is selected because it is listed first.
C. The next-hop 172.30.25.1 is selected because it is the lowest protocol preference.
D. The next-hop 172.30.25.5 is selected because it is the lowest protocol preference.

查看答案

[单项选择]Which command shows your active Telnet connections?（）
A. show session
B. show cdp neighbors
C. show users
D. show queue

查看答案

[单项选择]assuming the default switch configuration which vlan range can be added modified and removed on a cisco switch?（）
A. 2 through 1001
B. 1 through 1001
C. 1 through 1002
D. 2 through 1005

查看答案

[单项选择]Which command shows the event and traceoptions file for chassis clusters?（）
A. show log chassisd
B. show log clusterd
C. show log jsrpd
D. show log messages

查看答案

[单项选择]Which command shows all the paging spaces available on a system?（）
A. lsps -a
B. showps -a
C. psdisplay -l
D. swaplist -ALL

查看答案

[单项选择]Which command shows dump components and controls live dump attributes?（）
A. dumpctrl
B. sysdumpdev
C. livedumpdev
D. livedumpctrl

查看答案

[单项选择]Which command shows system hardware and software version information？（）
A. show configuration
B. show environment
C. show inventory
D. show platform
E. show version

查看答案

我来回答:

提交