题目详情
当前位置:首页 > 职业培训考试
题目详情:
发布时间:2024-01-31 03:53:34

[单项选择]A network administrator needs to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface for this connection?()
A. Router(config-if)# encapsulation frame-relay q933a
B. Router(config-if)# encapsulation frame-relay ansi
C. Router(config-if)# encapsulation frame-relay ietf
D. Router(config-if)# encapsulation frame-relay isl
E. None of the above

更多"A network administrator needs to co"的相关试题:

[单项选择]A network administrator needs to configure a serial link between the main office and a remote location.The router at the remote office is a non-cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?()
A. Main(config)#interface serial 0/0  Main(config-if)#ip address 172.16.1.1 255.255.255.252  Main(config-if)#no shut
B. Main(config)#interface serial 0/0  Main(config-if)#ip address 172.16.1.1 255.255.255.252  Main(config-if)#encapsulation ietf Main(config-if)#no shut
C. Main(config)#interface serial 0/0  Main(config-if)#ip address 172.16.1.1 255.255.255.252  Main(config-if)#encapsulation frame-relay  Main(config-if)#authenication chap Main(config-if)#no shut
D. Main(config)#interface serial 0/0  Main(config-if)#ip address 172.16.1.1 255.255.255.252   Main(config-if)#encapsulation ppp Main(config-if)#no shut
[多项选择]A network administrator needs to configure port security on a switch.which two statements are true?()
A. The network administrator can apply port security to dynamic access ports
B. The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.
C. The sticky learning feature allows the addition of dynamically learned addresses to the running configuration.
D. The network administrator can apply port security to EtherChannels.
E. When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.
[单项选择]Why would a network administrator configure port security on a switch?()
A. To prevent unauthorized Telnet access to a switch port.
B. To limit the number of Layer 2 broadcasts on a particular switch port.
C. To prevent unauthorized hosts from accessing the LAN.
D. To protect the IP and MAC address of the switch and associated ports.
E. To block unauthorized access to the switch management interfaces over common TCP ports.
[单项选择]Which command is used to configure a default route?()
A. ip route 172.16.1.0 255.255.255.0 0.0.0.0
B. ip route 172.16.1.0 255.255.255.0 172.16.2.1
C. ip route 0.0.0.0 255.255.255.0 172.16.2.1
D. ip route 0.0.0.0 0.0.0.0 172.16.2.1
[单项选择]Which command will configure a default route on a router?()
A. router(config)# ip route 0.0.0.0 10.1.1.0 10.1.1.1
B. router(config)# ip default-route 10.1.1.0
C. router(config)# ip default-gateway 10.1.1.0
D. router(config)# ip route 0.0.0.0 0.0.0.0 10.1.1.1
[多项选择]You have been asked to configure a default route. Which of the IOS commands mentioned below will accomplish this task?()
A. LTD(config)# ip route 0.0.0.0 0.0.0.0 192.168.15.36
B. LTD(config)# ip route 0.0.0.0 192.168.15.36 255.255.255.255
C. LTD# ip default-network 0.0.0.0 192.168.15.36 255.255.255.255
D. LTD(config)# ip route 0.0.0.0 0.0.0.0 E0
E. LTD(config)# ip route 0.0.0.0 255.255.255.255 S0
F. LTD(config-router)# ip route 255.255.255.255 0.0.0.0 192.168.15.36
[单项选择]A network administrator must configure 200 switch ports to accept traffic from only the currently attached host devices. What would be the most efficient way to configure MAC-level security on all these ports?()
A. Visually verify the MAC addresses and then telnet to the switches to enter the switchport-port security mac-address command
B. Have end users e-mail their MAC addresses. Telnet to the switch to enter the switchport-port security mac-address command
C. Use the switchport port-security MAC address sticky command on all the switch ports that have end devices connected to them
D. Use show mac-address-table to determine the addresses that are associated with each port and then enter the commands on each switch for MAC address port-security
[单项选择] A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?()
A. CAT3 cable
B. Serial cable
C. Crossover cable
D. Rollover cable
[单项选择]A network administrator needs to verify that switch interface 0/5 has been assigned to the Sales VLA.N. Which command will accomplish this task?()
A. Show vlan
B. Show mac-address-table
C. Show vtp status
D. show spanning-tree root
E. show ip interface brief
[单项选择]The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not being used. What is the maximum number of usable IP addresses that can be supported on each LAN if the organization is using one class C address block?()
A. 8
B. 6
C. 30
D. 32
E. 14
F. 16
[单项选择] An administrator needs to configure a server (192.168.22.22) as a temporary solution for an NTP master that has stopped working. What is the process for configuring the NTP master?()
A. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'fudge 127.127.1.0 stratum 0', and then refresh the daemon.
B. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'master 127.127.1.0 stratum 0', and then refresh the daemon.
C. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line 'fudge 192.168.22.22 stratum 0', and then refresh the daemon.
D. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line 'master 192.168.22.22 stratum 0', and then refresh the daemon.
[单项选择] An administrator needs to terminate network cables that have just been installed in the main communications closet. Which of the following tools is required?()
A. Multimeter
B. Snips
C. Toner probe
D. Punch down tool
[单项选择]The network administrator is asked to configure 113 point-to-point links.Which IP addressing scheme best defines the address range and subnet mask that meet the requirement and waste the fewest subnet and host addresses?()
A. 10.10.0.0/18 subnetted with mask 255.255.255.252
B. 10.10.0.0/25 subnetted with mask 255.255.255.252
C. 10.10.0.0/24 subnetted with mask 255.255.255.252
D. 10.10.0.0/23 subnetted with mask 255.255.255.252
E. 10.10.0.0/16 subnetted with mask 255.255.255.252

我来回答:

购买搜题卡查看答案
[会员特权] 开通VIP, 查看 全部题目答案
[会员特权] 享免全部广告特权
推荐91天
¥36.8
¥80元
31天
¥20.8
¥40元
365天
¥88.8
¥188元
请选择支付方式
  • 微信支付
  • 支付宝支付
点击支付即表示同意并接受了《购买须知》
立即支付 系统将自动为您注册账号
请使用微信扫码支付

订单号:

请不要关闭本页面,支付完成后请点击【支付完成】按钮
恭喜您,购买搜题卡成功
重要提示:请拍照或截图保存账号密码!
我要搜题网官网:https://www.woyaosouti.com
我已记住账号密码