更多"Router R1 uses S0/0 to connect via "的相关试题:
[单项选择] A company uses Routers R1 and R2 to connect to ISP1 and ISP2, respectively, with Routers I1 and I2 used at the ISPs. R1 peers with I1 and R2; R2 peers with I2 and R1. Assuming as many default s ettings as possible are used on all four routers, which of the following is true about the next - hop IP address for routes R1 learns over its iBGP connection to R2?()
A. The next hop is I2's BGP RID
B. The next hop is I2's IP address used on the R2 - I2 neigh bor relationship
C. The next hop is R2's BGP RID
D. The next hop is R2's IP address used on the R1 - R2 neighbor relationship
[单项选择] Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of 10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1's configuration includes the command s router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in the command output, but not S0/2. Which answer gives the reason for the omission?()
A. R1 has EIGRP neighbors reachable via S0/0 and S0/1, but not via S0/2, so it is not included.
B. S0/2 may currently be in a state other than up/up.
C. The network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being classful by default.
D. S0/2 may be configured as a passive inter face.
[单项选择] Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?()
A. R1 has been configured with an ip default- network 2.0.0.0 command.
B. R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.
C. R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
D. Another router has been configured with an ip default - network 2.0.0.0 command.
E. Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
[判断题]电阻R1,R2并联,已知R1>>R2,并联后的等值电阻近似等于R1,即R≈R1。
[单项选择]小麦的粒色由两对同源染色体上的两对基因R1和r1、R2和r2控制。R1和R2决定红色,r1和r2决定白色(说明R1和R2的遗传效应相同)。麦粒的颜色随R的数量增加而逐渐加深。将红粒(R1R1R2R2)与白粒(r1r1r2r2)杂交得F1,F1自交得F2,则F2的表现型有()
A. 4种
B. 9种
C. 5种
D. 10种
[填空题]电阻R1和R2串联,已知R2=4R1,若R2两端电压U2=16V,则R1两端电压U1=()。
[多项选择] Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result?()
A. R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
B. R1 can send IP packets to R2, but R2 cannot send IP packets to R1
C. R2 no longer learns EIGRP routes from R1 for routes not connected to R1
D. R1 no longer replies to R2's Query messages
E. R2n o longer sends to R1 Query messages
[单项选择]两个电阻R1、R2串联,其中Rl=1Ω,几=2Ω,通过R1的电流为lA,则电阻R1、R2消耗的总功率为()
A. 5W
B. 4W
C. 3W
D. 2W
[判断题]执行N10 R1=5;N20 R1=R1+5;后参数R1的值为仍为5(SIEMENS系统)。
[判断题]已知R1=5Ω,R2=10Ω,把R1、R2串联起来,并在其两端加15V的电压,此时R1所消耗的功率是5W。
[简答题]画出R1、R2、R3并联后又串上R4、R5、R6并联的复联图。
[判断题]表达式"R1=R2+R3*SIN(R4)"的运算次序依次为SIN(R4),R3*SIN(R4),R2+R3*SIN(R4)(SIEMENS系统)。
[单项选择]已知R1=8,R0=9,执行指令MOV R0,R1,LSR#3后,R0的值为()。
A. 1
B. 8
C. 0x10
D. 0x80
[单项选择]在位移法典型方程r11×Z1+r12×Z2+R1P=0,r21×Z1+r22×Z2+R2P=0中,下列式子正确的是()。
A. r11=r22
B. r12=r21
C. r12×Z2=r21×Z1
D. R1P=R2P
[填空题]已知R2和R3并联后,再与R1组成串联的电路,外加总电压为27V,且R1=7Ω,R2=6Ω,R3=3Ω,则流经R2的电流为()。
[简答题]已知U=20V,R1与R2并联,R1=2Ω,R2=4Ω试求该电路总电阻R,线路电流I?